采用激光光刀的叶片三维面形测量方法

提出一种采用激光光刀的叶片三维面形测量方法。介绍了方法原理、系统结构、信息获取与处理方案,并给出了对实际飞机发动机叶片的面形测量结果。     

钻井液波信号处理方法比较

无线随钻测量系统中的脉冲信号受各种噪声的干扰,在井口需要还原脉冲信号,实时监测井底的情况。采用傅立叶变换和小波变换2种方法对钻井液波信号进行了处理,并尝试性地采用相关系数来评判去噪效果的优劣。对巴特沃斯、切比雪夫和小波变换3种处理方法的结果进行了比较。结果表明:小波变换对这种信号的噪声抑制效果较好;对于钻井液波信号噪声的处理,小波变换明显地优于傅里叶变换;相关系数能够用来评判钻井液波信号处理结果的优劣。     

计及PMU的混合非线性状态估计新方法

提出一种将同步相量测量单元（PMU）的直接电压相量量测变换为间接支路电流量测，并与监控与数据采集（SCADA）量测量一起进行混合迭代的非线性状态估计方法。对构造等效电流修正量而带来的间接量测误差进行了详细和定量的分析，并对该混合估计算法的精度进行了定性分析和定量计算。理论分析和算例表明，该方法可以获得较高的估计精度，在收敛次数和滤波效果上也有所改进。     

Development,construction, and use of pneumometric tubes for measurement of steam flow in the steam lines of PVG-1000 at NPP

A system for the direct measurement of steam flow in steam lines after a steam generator, which utilizes a special design of pneumometric tubes and a computing unit that accounts for variation in steam pressure, has been developed to improve the quality of water-level regulation in the steam generators of VVéR-1000 power-generating units in the stationary and transitional modes. The advantage of the pneumometric tubes consists in their structural simplicity, high erosion resistance, and absence of irrevocable losses during measurement of steam flow. A similar measurement system is used at foreign NPP. The measurement system in question has been placed in experimental service at the No. 3 unit of the Balakovo NPP, and has demonstrated its worthiness. This measurement system can also be used to determine steam flow in the steam lines of NPP units with VVéR-1000 and VVéR-440 reactors, and PBMK-1000 power-generating units. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 23–26.     

自控温电伴热材料在仪表测量管线上的应用

文章就化工自动化仪表测量管线的伴热问题,介绍了自控温电伴热材料的特点、伴热设计、施工方案以及运行中的注意事项。     

Experimental methods for measuring the oil-film thickness between the piston-rings and cylinder-wall of internal combustion engines

Computer models of the lubrication of piston-rings in internal combustion engines normally present an estimate of the minimum oil-film thickness between ring and cylinder wall as a function of crank angle. As a consequence, experimental measurements of film thickness play a critical role in the verification of theoretical models of piston-ring lubrication. A review is presented of the wide range of techniques that have been used to measure this important variable. The strengths and weaknesses of particular techniques are identified and a number of ways in which the techniques could be developed further are proposed     

大坝水平位移监控指标拟定的混合法

用混合法拟定了大坝水平位移的监控指标，即通过结构分析和建立数值 模型，计算大坝水平位移的水压分量和给定概率水平下的温度分量极值，进而拟定水平位移 监控指标，并给出了实例。     

大坝变形自动监测仪器

混凝土大坝的变形,尤其是坝基和拱座的变形,是衡量工程安全与否的一个重要指标。变形自动监测仪器与人工测读的仪器相比,具有精度高、时间快的优点。本文参考国外资料,提出测斜仪、钻孔变位计、垂线自动监测仪等三种国内外正在试用的电子仪器。将有助于提高并改善大坝设计的经济性和安全性。     

Ultrasonic measurement of the inter-electrode gap in electrochemical machining

During the process of electrochemical machining the dependency of the inter-electrode gap with time and process parameters can be used to determine process characteristics and to define the shape of the workpiece surface relative to the tool surface. Defining process variables to map out the required gap-time function requires the use of time-consuming iterative trials. In-line monitoring of the gap would enable process control and tool to workpiece transfer characteristics to be achieved (for ideal conditions) without the requirement to generate such parameter maps. This work explores the use of ultrasound applied as a passive, non-intrusive, in-line gap measurement system for ECM. The accuracy of this technique was confirmed through correspondence between the generated gap-time and current time data and theoretical models applicable to ideal conditions. Gap measurements are also used to demonstrate and quantify the degree of departure from ideal behaviour for an In718/chloride system as the electrolyte flow rate is reduced from 16 to 4 l min⁻¹. The monitoring of the gap size has also been shown to be effective when determining shape convergence under ideal conditions, for the example case of a 2D sinusoidal profile.     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系