Gleeble 3800热模拟试验机在宝钢的典型应用与功能开发

热模拟试验可研究成分与各工艺参数对组织和性能的影响，用于指导产品设计和实际生产工艺的制定，还有助于建立数学模型。文章介绍了Gleeble 3800热／力模拟试验机在宝钢实际应用中的几个典型试验，包括高温热塑性试验、多道次变形试验、冷轧薄板相转变点试验和HAZ焊接热影响区热模拟试验等。这些试验可用来解决连铸、轧钢和冷轧产品热处理生产中存在的一些问题。     

Polymer-Modified Bitumen Using Ethylene Terpolymers

Polymer modified bitumen (PMB) is used in various construction applications, especially in motorways. The aim of this study is to improve features of 60/70 penetration grade, modified bitumen used on highways. Increasing the sensitivity to temperature and oxidation resistance are very important points for the modified bitumen. This condition was provided by reacting the carboxylic acid groups in asphaltene with the reactive ethylene terpolymer to form ester. Reactive ethylene terpolymer (RETP) and ethylene terpolymer (ETP) manufactured by DuPont USA were used as additives in this study. Infrared Spectrophotometer (IR) graphics and optical pictures of the modified bitumen have been examined. It has been observed that the softening point has increased on the other hand, the penetration and ductility values have decreased according to the test results.     

Ca,Mg对镍基高温合金力学性能和热塑性的影响

本文研究了单加或同时添加微量Ca和Mg对变形及铸态镍基高温合金力学性能和热塑性的影响。试验表明,适量的Mg或Ca、Mg对提高合金的持久断裂寿命、高温拉伸塑性以及改善热塑性都取得良好效果。     

颗粒增强TiAl基复合材料及其Si的韧化作用研究EI

运用ＸＤ工艺制备了颗粒增强ＴｉＡｌ基复合材料。增强颗粒均匀分布于ＴｉＡｌ基体中并细化ＴｉＡｌ合金。通过在ＴｉＢ_２／ＴｉＡｌ、ＴｉＣ／ＴｉＡｌ复合材料中加入适量的Ｓｉ，颗粒增强ＴｉＡｌ基复合材料的室温延性得到了改善。     

Ti9Al合金的氢塑性效应

采用真空自耗电弧炉熔炼制备Ti9Al合金，通过渗氢处理显著提高氢含量，在凸轮塑性试验机ЧПИ-2上以10mm／min的速度进行热模拟试验。研究发现：氢可以降低Ti9Al合金的相变温度，扩大α β区的温度范围；氢作为卢稳定剂会妨碍或完全抑制以Ti3Al为基的α2相的析出；钛合金的氢合金化可促使卢相在更低温度下稳定化，明显地提高了Ti9Al合金塑性。     

Analysis of chill-cast NiAl intermetallic compound with copper additions

This study carried out a characterization of chill-cast NiAl alloys with copper additions, which were added to NiAl, such that the resulting alloy composition occurred in the β-field of the ternary NiAlCu phase diagram. The alloys were vacuum induction melted and casted in copper chill molds to produce ingots 0.002 m thick, 0.020 m wide, and 0.050 m long. X-ray diffractometry (XRD) and transmission electron microscopy (TEM) performed in chill-cast ingots identified mainly the presence of the β-(Ni,Cu)Al phase. As-cast ingots showed essentially no ductility at room temperature except for the Ni₅₀Al₄₀Cu₁₀ alloy, which showed 1.79% of elongation at room temperature. Ingots with this alloy composition were then heat treated under a high-purity argon atmosphere at 550 °C (24 h) and cooled either in the furnace or in air, until room temperature was reached. β-(Ni,Cu)Al and γ′(Ni,Cu)₃Al were present in specimens cooled in the furnace and β-(Ni,Cu)Al, γ′(Ni,Cu)₃Al plus martensite-(Ni,Cu)Al were present in specimens cooled in air. Thermogravimetric analysis indicated that martensite transformation was the result of a solid-state reaction with M _s ∼ 470 and M _f ∼ 430 °C. Tensile tests performed on bulk heat-treated ingots showed room-temperature ductility between 3 and 6%, depending on the cooling media.     

CPE系列聚合物改性路用沥青

研究了氯化聚乙烯(CPE)系列聚合物体系对改性沥青性能的影响．以及CPE含量、母料比例等对改性沥青的影响。实验结果表明．母炼胶法制备的改性沥青能够取得较好的效果。通过对CPE体系和CPE—g—MAH体系的比较．能直观的看到界面相容性对改性沥青起着至关重要的作用，使改性沥青呈现较好的延度、针入度和软化点。同时。对改性沥青的工艺进行了探索。     

现代陶艺的特异性

现代陶艺集雕塑语言与绘画语言于一体,加上陶瓷工艺的神奇功效而形成现代陶艺特有的艺术语言,陶艺已成为现代艺术家喜爱的最富特色和最具活力的艺术创作形式之一。本文就现代陶艺的随意性,创造性,工艺性谈谈现代陶艺的特异性。     

梁端翼缘扩大型梁柱节点抗震性能和设计方法

为使钢框架梁柱节点满足强柱弱梁的抗震设计原则,并使梁上塑性铰远离梁柱节点区,对梁端翼缘扩大型(包括侧板加强型和翼缘端部放大型)钢框架梁柱节点进行了往复荷载下的试验研究,得到了节点类型和梁端翼缘扩大尺寸对节点滞回性能、延性和耗能能力等指标的影响规律.在使用非线性有限元程序对试验结果进行数值模拟的基础上,研究了梁端翼缘扩大段的长度及宽度等参数对节点性能的影响规律和有效取值范围,给出了实用设计方法.使用梁端翼缘扩大型钢框架节点可以有效实现梁端塑性铰外移,是一种在抗震设计中值得推广的具有良好延性和塑性转动能力的新型节点形式.     

高强钢筋高强混凝土剪力墙抗震性能试验

目的 研究高强混凝土剪力墙的抗震性能、破坏形式和机理.方法 通过在剪力墙中配置高强钢筋,利用高强钢筋高强度、低松弛、强握裹力以及良好塑性性能等特点,增强对高强混凝土的约束,提高高强混凝土剪力墙的承栽和变形能力.通过5片高强混凝土剪力墙试件的拟静力试验,研究不同的混凝土强度、轴压比和剪跨比等参数对其抗震性能的影响.将1 280MPa预应力钢棒作为箍筋和纵筋配置在剪力墙的边部约束构件(暗柱)以及墙体的分布钢筋中.通过对比研究配置高强钢筋对高强混凝土剪力墙抗震性能的提高效果.结果 明确了高强混凝土剪力墙的不同破坏形态和过程,得出了影响高强混凝土剪力墙抗震性能的主要因素和影响规律.位移延性系数可达3.9,满足结构抗震要求.结论 试验结果 证明在高强混凝土中合理适当地配置高强钢筋,可增强其变形能力.