无功补偿在高耗能工业区的应用

针对如何解决高耗能工业区电网系统缺无功问题,提出了切实可行的方案,并通过实例,对方案的效益进行了评价。     

D-T中子穿透铁球伴生γ射线泄漏能谱实验研究

建立了系列厚度为3、6、11、16、21．8cm的铁球基准装置。用BC-501A谱仪测量了D-T中子穿透铁球伴生γ射线泄漏能谱，能量范围为0．5～5MeV。通过能谱分析，观测到铁球厚度对能谱有一定影响。利用MCNP4A程序和t-2、ENDF／B-V、ENDF／B-Ⅵ和FENDL-2等数据库对实验进行了模拟计算，并将计算结果与实验结果进行了比较。γ射线能谱实验误差为4％～6％。     

An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics

This paper analyzes the formulation of energy preserving/decaying schemes for dynamics problems. We argue that any energy preserving/decaying scheme can always be seen as composed of an underlying temporal discretization, that is then slightly modified in order to prove a discrete energy bound within a time step. While the details of the modified scheme depend in a critical way on the governing equations, the underlying discretization can in principle be applied to a variety of models. We review some of the temporal underlying schemes recently proposed in the literature, presenting them with a common notation. We show their similarities and highlight their differences.     

高能球磨LaNi5-34%(质量分数)Mg的相组成与热稳定性能

采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、差热分析(DTA)等方法研究了高能球磨及热处理等对新型合金LaNi5-34％(质量分数)Mg的相组成、形貌及热稳定性能等的影响。结果表明：经100r／min球磨100h及190r／min球磨100h后,样品由La、Mg、Ni等非晶。微量的晶体Ni和MgNi2相组成,所得粉末的形状大多为规则的球形或近球形,其颗粒直径范围为0．05～33．0μm。球磨样品具有较好的室温活化特性，其最大电化学放电容量为460mAh／g。该样品经763K保温35d后，得到热稳定性较好的具有纳米尺度的MgNi2、Mg2Ni、Mg2NiLa三相组织，其平均晶粒直径为21.3nm。     

我国能源工业现状和能源政策

能源工业是我国国民经济的重要组成部分。要实现“十六大”提出的2020年国内生产总值翻两番的宏伟目标，充足、稳定、经济、清洁的能源供应是重要的物质保障。文中从能源产量与需求、能源结构优化、能源技术水平、能源体制改革、能源可持续发展、农村能源建设、能源效率等方面对我国能源工业现状进行深入分析，在此基础上指出未来中国的能源政策应包括5个方面：优化能源结构、提高能源效率、重视环境保护、保障能源安全、开发西部能源。     

钢管混凝土的等效本构关系研究

在总结现有钢管混凝土本构关系分析的基础上,将钢管混凝土简化为同一尺度的横观各向同性体来研究,并在弹性条件下利用应变能相等原理得到了宏观弹性系数,同时根据试验结果假设进入弹塑性阶段后各模量为二次抛物线变化,建立了钢管混凝土这种组合结构新的等效本构关系.并结合具体算例研究了弹性条件下材料强度变化和含钢率对各模量的影响,同时与前人的研究结果进行了比较,结果表明,该本构关系具有理论依据明确,参数易确定,能很好地反映组合构件材料物理性能的优点,为钢管混凝土结构进一步进行数值分析奠定了基础.     

The effect of some instrument operating conditions on the x-ray microanalysis of particles in the environmental scanning electron microscope

The objective of this investigation was to evaluate the practical effects of electron beam broadening in the environmental scanning electron microscope (ESEM) on particle x-ray microanalysis and to determine some of the optimum operating conditions for this type of analysis. Four sets of experiments were conducted using a Faraday cage and particles of copper, glass, cassiterite, andrutile. The accelerating voltage and chamber pressure varied from 20 to 10 kV and from 665–66 Pa (5.0 to 0.5 torr), respectively. The standard gaseous secondary electron detectors (GSED) and the long environmental secondary dectectors (ESD) for the ESEM were evaluated at different working distances. The effect of these parameters on the presence of artifact peaks was evaluated. The particles were mounted on carbon tape on an aluminum specimen mount and were analyzed individually and as a mixture. Substrate peaks were present in almost all of the spectra. The presence of neighboring particle peaks and the number of counts in these depended upon the operating conditions. In general, few of these peaks were observed with the long ESD detector at 19 mm working distance and at low chamber pressures. More peaks and counts were observed with a deviation from these conditions. The most neighboring peaks and counts were obtained with the GSED detector at 21.5 mm working distance, 10 kV accelerating voltage, and 665 Pa (5.0 torr) chamber pressure. The results of these experiments support the idea that the optimum instrumental operating conditions for EDS analysis in the ESEM occur by minimizing the gas path length and the chamber water vapor pressure, and by maximizing the accelerating voltage. The results suggest that the analyst can expect x-ray counts from the mounting materials. These tests strongly support the recommendation of the manufacturer to use the long ESD detector and a 19 mm working distance for EDS analysis. The results of these experiments indicate that neighboring particles millimeters from the target may contribute x-ray counts to the spectrum.     

考虑风电接入和气电转换的综合能源系统日前区间优化

针对气电综合能源系统优化调度中未充分挖掘可调度因素、未充分考虑风电预测误差不确定性的现状,研究含风电的气电综合能源系统日前区间优化调度方法。首先,基于区间数学对风电出力的不确定性进行区间描述,综合考虑抽水蓄能、气电双向转换以及需求响应等资源和技术,并用区间数学表示优化目标和优化约束,构建含高比例风电的气电综合能源系统日前优化模型,综合优化系统的经济性、环保性。然后,基于区间序关系和可能度的方法将区间优化模型转化为确定性优化模型,继而采用Jaya算法进行求解,保证求解的高效性和解空间的可行性。最后,进行算例分析,仿真结果验证了综合利用抽水蓄能、气电双向转换以及需求响应等要素对系统进行区间优化,能取得优化效果上的优势,并能为系统调度人员提供风电不确定度对系统优化影响的信息。     

利用铜尾矿烧制水泥熟料的技术研究

利用给定铜尾矿在系统分析的基础上,掺加其它一些原料,在实验室烧制高标号水泥熟料。     

用神经网络求解TSP的一种改进算法

对利用神经网络求解ＴＳＰ问题的算法进行了改进,在保持算法优点的基础上,使得所需神经元的数目减少,对提高计算效率以及神经网络的硬件实现有参考价值。