An improved new error estimation algorithm for optimal filter lengths for stereophonic acoustic echo cancellation

In this paper, we propose an new error estimate algorithm (NEEA) for stereophonic acoustic echo cancellation (SAEC) that is based on the error estimation algorithm (EEA) in [Nguyen-Ky T, Leis J, Xiang W. An improved error estimate algorithm for stereophonic acoustic echo cancellation system. In: International conference on signal processing and communication systems, ICSPCS’2007, Australia; December 2007]. In the EEA and NEEA, with the minimum error signal fixed, we compute the filter lengths so that the error signal may approximate the minimum error signal. When the echo paths change, the adaptive filter automatically adjusts the filter lengths to the optimum values. We also investigate the difference between the adaptive filter lengths. In contrast with the conclusions in [Khong AWH, Naylor PA. Stereophonic acoustic echo cancellation employing selective-tap adaptive algorithms. IEEE Trans Audio, Speech, Lang Process 2006;14(3):785-96, Gansler T, Benesty J. Stereophonic acoustic echo cancellation and two channel adaptive filtering: an overview. Int J Adapt Control Signal Process 2000;4:565-86, Benesty J, Gansler T. A multichannel acoustic echo canceler double-talk detector based on a normalized cross-correlation matrix. Acoust Echo Noise Control 2002;13(2):95-101, Gansler T, Benesty J. A frequency-domain double-talk detector based on a normalized cross-correlation vector. Signal Process 2001;81:1783-7, Eneroth P, Gay SL, Gansler T, Benesty J. A real-time implementation of a stereophonic acoustic echo canceler. IEEE Trans. Speech Audio Process 2001;9(5):513-23, Gansler T, Benesty J. New insights into the stereophonic acoustic echo cancellation problem and an adaptive nonlinearity solution. IEEE Trans. Speech Audio Process 2002; 10(5):257-67, Benesty J, Gansler T, Morgan DR, Sondhi MM, Gay SL. Advances in network and acoustic echo cancellation. Berlin: Springer-Verlag; 2001], our simulation results have shown that the filter lengths can be different. Our simulation results also confirm that the NEEA is better than EEA and SM-NLMS algorithm in terms of echo return loss enhancement.     

Confidence intervals for dependent data: Equating non-overlap with statistical significance

We revisit the problem of determining confidence interval widths for the comparison of means. For the independent two-sample (two-sided) case, Goldstein and Healy (1995) draw attention to the fact that comparisons based on 95% error bars are not very effective in assessing the statistical significance of the difference in means and derive the correct confidence interval for such a comparison. We provide an extension to Goldstein and Healy (1995) to account for the correlation structure and unequal variances. We use the results to develop rules of thumb for evaluating differences, in an exploratory manner, like Moses (1987) and Cumming (2009), from the independent case. We illustrate the method for the simple comparison of two means in a real data set, provide R code that may be easily implemented in practice, and discuss the extension of the method to other applied problems.     

齐次等式约束线性回归模型条件根方估计的效率

对齐次等式约束线性回归模型回归系数的约束最小二乘估计提出改进,引入一种估计的相对效率,证明在一定条件下,狭义条件根方估计、广义条件根方估计的效率均高于约束最小二乘估计的效率．     

Numerical method using cubic B-spline for the heat and wave equation

In the present paper, the cubic B-splines method is considered for solving one-dimensional heat and wave equations. A typical finite difference approach had been used to discretize the time derivative while the cubic B-spline is applied as an interpolation function in the space dimension. The accuracy of the method for both equations is discussed. The efficiency of the method is illustrated by some test problems. The numerical results are found to be in good agreement with the exact solution.     

Space and time localization for the estimation of distributed parameters in a finite element model

In this paper we study the problem of estimating the possibly non-homogeneous material coefficients inside a physical system, from transient excitations and measurements made in a few points on the boundary. We assume there is available an adequate Finite Element (FEM) model of the system, whose distributed physical parameters must be estimated from the experimental data.We propose a space–time localization approach that gives a better conditioned estimation problem, without the need of an expensive regularization. Some experimental results obtained on an elastic system with random coefficients are given.     

AVS视频的分层重传优化策略与实现

针对网络抖动等因素会影响图像质量的问题,采用差错控制与拥塞控制相结合的恢复技术,改进AVS视频数据在传输层的RTP打包,提出提高重传效率的AVS视频分层重传策略,通过令牌发放的方式控制数据包重传的次数解决重传导致网络拥塞问题。实验结果表明,在低带宽的网络下,该策略对AVS视频传输相对于无令牌发放的重传方式图像质量有一定的提高。     

基于差值扩展和纠错编码的可逆图像认证

针对一些敏感数字图像在认证水印嵌入过程中不能引入失真的问题,提出一种能够定位图像篡改块的可逆图像认证方案,利用纠错编码使认证数据能抵抗可能受到的篡改攻击,并用差值扩展的方式将编码后的认证数据嵌入到图像中。仿真实验结果表明,若认证通过,则图像可完全恢复到原始状态,否则,图像中篡改的块可被定位,并完全恢复其他未篡改的区域。     

Multi-category classifiers and sample width

In a recent paper, the authors introduced the notion of sample width for binary classifiers defined on the set of real numbers. It was shown that the performance of such classifiers could be quantified in terms of this sample width. This paper considers how to adapt the idea of sample width so that it can be applied in cases where the classifiers are multi-category and are defined on some arbitrary metric space.     

High Order Schemes for Resolving Waves: Number of Points per Wavelength

For energetic flows there are many advantages of high order schemes over low order schemes. Here we examine a previously unknown advantage. It is commonly thought that the number of points per wavelength in order to obtain a given error in a numerical approximation depends only on runtime and the order of the approximation. Using truncation error arguments and examples we will show that it is not a constant and depends also on the wavenumber. This dependence on the numerical order and wavenumber strongly favors high order schemes for use in flows which have significant energy in the high modes such at Rayleigh–Taylor and Richtmyer–Meshkov instabilities.     

运用EXCEL函数进行完全随机试验设计

完全随机设计的实质是将供试单位随机分组。该文通过对完全随机设计实质的分析,对运用EXCEL进行完全随机试验设计的方法进行了介绍。结果认为只要每一独立供试单位在组间随机排列,始终贯穿随机精神以最大限度地减少系统误差,灵活利用Excel的随机函数如RANDOM、RANDOMBETWEEN等和排序按钮,用任何一种方法都可以快速的进行完全随机试验设计。