基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

复合材料边界元素法研究

边界元法是一种迅速发展的数值解法.本文研究了在复合材料层合板中运用平面二次边界元法的有关问题.首先,讨论了将层合板等效为一般正交各向异性单层板的方法;其次,给出了偏轴情况下的基本解,研究了直线型二次边界元偏轴影响系数的解析计算以及域内应力表达式;最后对算例进行了计算,所得结果与相应的解析解和有限元相符甚好.     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

Heat transfer in YBaCuO thin film/sapphire substrate system

The thermal boundary resistance at the YBaCuO thin film/Al₂O₃ substrate interface was investigated. The transparency for thermal phonons incident on the interface as well as for phonons moving from the substrate was determined. We have measured a transient voltage response of current-biased films to continuously modulated radiation. The observed knee in the modulation frequency dependence of the response reflects the crossover from the diffusion regime to the contact resistance regime of the heat transfer across the interface. The values of transparency were independently deduced both from the phonon escape time and from the time of phonon return to the film which were identified with peculiarities in the frequency dependence. The results are much more consistent with the acoustic mismatch theory than the diffuse mismatch model.We are grateful to A. Elantev for helpful discussion. We acknowledge the financial support of the Russian Scientific Council on the HTS problem (Project No. 90462).     

下运带式输送机液压制动系统的研究

首先对下运带式输送机的制动问题进行了分析,而后介绍了一种新型液压制动系统的基本原理、组成和用途,以及液压制动系统的控制要求和工作状态。实践结果表明,采用该液压制动系统从根本上保证了大倾角下运带式输送机的安全高效生产。     

中央空调系统变频节能改造方案

在我国经济快速发展的大背景下,能源（水、电、油）的消耗在企业中所占的比重越来越高,也受到愈来愈大的重视。同时也由于房地产的快速发展需求,中央空调的市场需求呈现强劲的增长。在市场容量不断增大的吸引下,越来越多的厂家加入到商用中央空调的领域。变频技术应用于中央空调系统,对提升中央空调自动化水平、降低能耗.减少对电网的冲击,延长机械及管网的使用寿命,都具有重要的意义。     

网络条件下的资本一般及其逻辑推演——利益、规则与标准

通过对资本一般概念的分析，结合资本一般的运动功能论述，认为在经济全球化和网络条件下，资本增值属性必然导致对规则和标准的争夺与控制，标准战是资本一般在新的经济社会形态下发展的必然逻辑结果。     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

Three-Dimensional Solution and Experimental Confirmation for the Electric Resistivity Testing of Surface-Breaking Defects in Green-State Powder Metallurgy Compacts

This paper investigates electrostatic voltage distributions around a surface-breaking flaw due to an injected current of known strength. The direct 3-D solution of the voltage behavior over the flawed surface is obtained numerically by the use of a boundary integral formulation. A novel iteration method is applied to solve the resulting electrostatic integral equation for the unknown surface voltage distribution. In addition to investigating the sensitivity of different flaw sizes to the observed surface voltage distribution, important issues such as suitable probe spacing and current flow orientation are studied. For sufficiently small surface-breaking flaws, a simple image source model is developed to evaluate the voltage response of hairline cracks. The model is tested by comparing it with the developed numerical solution. Experiments aimed at establishing the validity of the modeling approach show remarkable agreement with the theoretical model.