海洋平台振动控制研究综述

对海洋平台结构振动的控制研究进行了综述。主要介绍了TMD、TLD以及粘弹性阻尼器，并相应地介绍了被动控制、半主动控制和主动控制技术。平台结构的自身减振设计也进行了介绍。最后对海洋平台结构振动控制问题进行了探讨，提出了一些看法。     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

大体积承台混凝土施工

阐述了东莞水道特大桥主桥承台大体积混凝土浇筑施工工艺 ,及施工中的注意事项 ,从分层的厚度、表面处理等方面 ,提出了采用泵送混凝土浇筑施工中质量弊病的预防措施     

冶金烧结强化盘式钻头齿圈的试验研究

在分析盘式钻头齿圈失效机理的基础上,提出了齿圈表面堆焊耐磨合金强化和镶嵌硬质合金齿圈强化两种方法。通过试验研究和对比分析,确定了采用冶金混合烧结固齿法镶嵌硬质合金齿圈强化盘式钻头。进一步的试验研究表明:采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈,其结合情况非常好;硬质合金齿圈的硬度、耐磨料磨损的能力和耐冲击磨料磨损的能力在烧结后都有进一步的提高,说明采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈是可行的。     

浅海导管架平台地震响应分析

探讨了对浅海固定平台导管架结构的地震响应的要求及其分析方法。     

预应力长线台座的施工方法及要点

叙述我国中小型建筑构件厂最常用的预应力长线台座的建造过程，以及必须注意的事项及质量控制方法。     

彩色显象管曝光台校准仪光学系统的设计

论述了彩色显象管曝光台校准仪的基本原理和光学系统的设计方法，分析了系统测量精度及有关性能参数。     

Multi-heuristic scheduling: three approaches to tune compromises

Most of the available industrial schedulers are based on a simulation approach using dispatching rules. These rules are often dedicated to the satisfaction of a single performance criterion, and are used whatever the characteristics of the workshop or of the set of jobs. An approach which allows one to bring in compromises between rules is set out in this paper. These compromises can be parametered in accordance with the objectives of the workshop and the characteristics of the jobs in order to introduce some reactivity in the decision system. Three ways to set up the parameters are compared: experimental design, fuzzy expert system and neural network. The method allowing one to define compromises can be implemented on each scheduler that uses a simulation approach. Tests have been made with an industrial scheduler called SIPAPLUS, the results of which are developed in this paper.     

埕岛油田卫星平台金属软管漏蚀问题的分析和对策

对埕岛油田卫星平台多年来一直存在的金属软管漏蚀问题进行分析,找出了导致金属软管漏蚀的主要原因,提出了相应的防治措施,主要有:在金属软管外部裹附橡胶垫,采用带弯头的减振金属软管,安装时金属软管的曲率半径要大于其最小弯曲半径等。通过采取一系列措施,解决了金属软管的漏蚀问题,达到了预期的效果。