基于HEVC的帧内快速模式选择算法

为了解决高效率视频编码(High Efficiency Video Coding,HEVC)复杂度过高的问题,基于粗粒度模式选择(Rough Mode Decision,RMD)过程提出一种降低编码复杂度的方法。该算法充分利用了RMD候选队列的相似程度和预测模式在方向上的相关性这两个特性,进一步减少了进入率失真优化过程(Rate Distortion Optimization,RDO)的预测模式数量,达到了降低编码复杂度的目的。实验结果表明,该算法在编码质量损失0.5%的情况下节省了近22%的编码时间。     

基于匹配策略融合的低误差快速图像拼接算法

针对目前多数拼接算法正确匹配率低、耗时及误差大的问题,提出了基于匹配策略融合的改进图像拼接算法。该算法首先仅在图像的重合区域提取SIFT特征点,并计算SURF特征描述符;其次,融合改进的最近邻比次近邻、双向交叉检查及匹配差值的阈值化3种匹配策略,结合坐标约束及RANSAC算法完成特征匹配;最后,提出利用配准参数计算任意图像到参考图像坐标空间的投影变换模型的方法,并利用多线程技术将所有图像投影至参考坐标系,经过亮度校正、加权融合后合成全景图。实验结果表明,提出的拼接算法正确匹配率提高了10~20%,拼接总耗时约为传统逐帧扩大式拼接算法的1/3,且累计误差大大降低,拼接图像畸变小。     

新一代喷涂聚脲路面标线涂料

简述了国内路标漆的发展概况,介绍了聚天冬氨酸酯聚脲路标漆的原理、配方及应用性能。针对目前国内各种路标漆的优缺点,将聚天冬氨酸酯聚脲路标漆与它们进行比较,发现聚天冬氨酸酯聚脲路标漆具有快干、耐磨、反光效果好、施工速度快、重涂性好等优点,特别适用于路面标线涂料的应用。     

快速流化床中颗粒团聚现象的数值模拟——曳力关联式的选择

Drag force is a key parameter in the numerical modeling of gas-particle flow in circulating fluidized beds. The reliability of current drag force correlations over the regime of fast fluidization has, however, not been thoroughly investigated. In this article, a drag force correlation accounting for the clustering effects for Geldart A particles is used to simulate the behaviors typical of fast fluidization, including dynamic evolution of clusters as well as time- averaged axial and lateral voidage profiles. Diverse images of clusters are captured and the time-averaged profiles of voidage are shown to be in quantitative agreement with the present empirical correlation. The results based on different constitutive correlations of drag force show the importance of the choice of drag force in modeling fast-fluidized beds. This drag force correlation, based on a simple averaging assumption, could give some basic insights about the magnitude of the drag reduction.     

Lignin‐based polycondensation resins for wood adhesives

Lignin‐based wood adhesives are obtained that satisfy the requirements of relevant international standards for the manufacture of exterior‐grade wood particleboard. Formulations based on low molecular mass lignin and presenting an increase in the relative proportion of reactive points yield better results than the higher molecular mass lignin used in the past. These lignins allow a higher proportion of hydroxymethylation during preparation of methylolated lignins. These lignin‐based adhesives also yield acceptable results at particleboard pressing times that are sufficiently low to be of industrial significance. Lignin‐based wood adhesives, in which a nonvolatile nontoxic aldehyde (glyoxal) is substituted for formaldehyde in their preparation, are prepared and tested for application to wood panels such as particleboard. The adhesives yield good internal bond strength results for the panels, which are good enough to comfortably pass relevant international standard specifications for exterior‐grade panels. The adhesives also show sufficient reactivity to yield panels in press times comparable to that of formaldehyde‐based commercial adhesives. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1690–1699, 2007     

一种基于混合量子粒子群的快速运动目标跟踪算法研究

量子粒子群算法在优化过程中需要权衡局部探索性和全局开拓性,进化后期由于全局开拓能力的丧失使得种群多样性减少,设计了一种基于欧式距离的混合量子粒子群算法,通过计算粒子的种群多样性,当种群多样性低于阈值范围时加入基于欧式距离的种群划分策略划分子种群,从而保证获得全局最优解。利用标准测试函数验证提出的混合量子群算法有效性。提出了基于混合量子粒子群的Mean Shift算法(HQPSO Mean Shift)完成目标快速跟踪,克服传统Mean Shift算法的在跟踪快速移动目标时出现"跟丢"的问题。     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

涂层转移法精密铸造技术在子午线轮胎模具制造中的应用

子午线轮胎模具计算机辅助快速制造系统是由ＣＡＤ技术、快速成型技术、涂层转移法精密铸造技术、材料技术等多项高新技术组合而成的一项独特的先进制造技术。该系统充分利用液态材料成型任意性和高再现性的特点，具有适应性强、重复性好、加工周期短、制造成本低的特点。     

多种以太网交换机仿真教学系统的硬件设计与实现

在高等教育学校中,为了更好地培养IT专业学生的理论结合实际的能力,大多数学校都在寻找适合自身实验室条件和师资力量的实验设备,而以太网交换机实践教学作为计算机网络教学中的重要组成部分,也存在着这种需求.为了满足某高校计算机网络实验室对以太网交换机的市场需求,设计了一款多种以太网交换机仿真教学系统.综合考虑以太网交换机的发展现状和趋势,分析系统的功能需求和可行性后,采用了硬件层、驱动层和软件应用层三级体系结构,使用软硬件结合的方法进行实现.使用Realtek公司的以太网控制器RTL8309SC和德州仪器TI公司的MSP430F149单片机成功搭建了一个具有标准接口的硬件支持平台,实现了系统的硬件层和驱动层.该硬件支持平台可以为使用者搭建一个性价比较高的真实网络环境,由于是自主研发,所以可以更灵活地实现以太网交换机硬件相关实验,具有较强的实用价值.     

EFT/B interference transmission model and method of anti-interference in a coal mine monitoring substation

Coal mining monitoring system has been enforcing tests for the immunity of Electromagnetic Compatibility (EMC) since 2006.However,not all monitoring substations can pass the Electrical Fast Transient/Burst (EFT/B) immunity test and the explosion-proof test simultaneously.In order to enhance EMC,the EFT/B interfere transmission model was presented at the substation power port,after the EFT/B test method was used to analyze the monitoring substation power ports.Hence,a low-pass filter was designed by using the simulation software PIPICE and an anti-jamming method was proposed by way of a parallel connection of the discharge interfere circuit and the low-pass filter.The improved complex EMI filter was made up of an interference discharge device and a filter.The dynamic equivalent circuit was proposed for the EFT/B immunity test.As a result,the monitoring substation has passed the EFT/B immunity and explosion-proof tests with the complex filter.It is concluded that the complex EMI filter has significantly enhanced the immunity of the coal mining monitoring system.