基于改进的GABP算法优化5G天线阵列

为了加快天线建模速度,针对现有天线设计软件天线参数优化速度过慢问题进行了建模研究。首先通过几种常用的启发式算法优化后的多层前馈（Back propagation,BP）神经网络对天线参数进行优化比较,并对其中最优的算法遗传算法优化BP（Genetic algorithm BP,GABP）神经网络算法进行深度改进。其次采用自适应算法和模拟退火算法优化算法对GABP进行优化。最终通过模拟试验验证出自适应GABP算法对于天线参数优化的误差最小。该研究为天线设计软件中天线优化方法提供了一种误差较小的新方法,拥有更高的预测准确度,拟合速度也大大提升。实验对比证明了该算法的可行性。     

基于光电成像技术的运动员垂直弹跳高度测试

针对运动员弹跳过程持续时间短,弹跳位置相对不固定,弹跳高度测试操作复杂的问题,提出一种基于线阵光电成像技术的运动员垂直弹跳高度测试方法;首先构建大视场垂直弹跳高度测试系统,线阵CCD相机进行实时获取,得到目标弹跳轨迹图像;然后对目标弹跳轨迹图像进行图像分析和处理,高精度提取弹跳特征点,从而获得运动员垂直弹跳的运动时间;最后依据运动学公式,实现运动员垂直弹跳高度的准确测试;进行多组实验并分析实验数据,结果表明在1500mm的弹跳测试范围内,实验相对误差范围在3%以内,证明了该方法的可行性。     

基于Attention-CGRU网络的中文语音情感识别

正确识别语音中包含的情感信息可以大幅提高人机交互的效率.目前,语音情感识别系统主要由语音特征抽取和语音特征分类两步组成.为了提高语音情感识别准确率,选用语谱图而非传统声学特征作为模型输入,采用基于attention机制的CGRU网络提取语谱图中包含的频域信息和时域信息.实验结果表明:在模型中引入注意力机制有利于减少冗余信息的干扰,并且相较于基于LSTM网络的模型,采用GRU网络的模型预测精确度更高,且在训练时收敛更快,与基于LSTM的基线模型相比,基于GRU网络的模型训练时长只有前者的60%.     

服务差异二级选址路径问题及大邻域搜索算法

在电子商务背景下,物流公司为了实现及时交付并缓解交通拥堵,可按照客户不同的服务需求,将其分为自取型和配送型,进而选择开放自助点或配送点对客户进行服务。自助点和配送点作为二级物流设施,配送中心作为一级物流设施,由此形成了二级选址-路径问题。在配送车数量约束、自助点容量约束等限制下,兼顾客户点物品回收,以总物流成本最小为目标,建立考虑服务差异的二级选址-路径问题模型。设计自适应大邻域搜索算法进行求解,通过Nguyen的2E-LRP算例进行测试,更新了1个算例的全球最优解,其余算例达到或接近最优解,平均Gap值在1.22%以内,验证了算法的有效性及良好的收敛性。实际案例模拟分析验证了模型的有效性和适用性,可以为相关物流企业提供决策依据和参考。     

基于FPGA的多通道雷达数据回放系统设计

为解决雷达实时信号处理功能及性能有效验证问题,文中设计并实现了一种宽窄带一体化、多通道雷达数据回放系统。该系统按雷达工作的时序和数据率将雷达回波数据发送至实时信号处理系统,从而对目标跟踪场景进行复现,实现雷达实时信号处理功能及性能的有效验证。系统硬件平台由磁盘阵列服务器与两块PCIe光纤板组成。基于Xilinx系列产品,结合系统特点对PCIe DMA控制流程及响应机制做进一步调整,实现了服务器到光纤板的雷达回波数据高速批量传输。根据雷达工作机制及回波数据结构,设计FPGA回放控制状态机及相关功能模块,严格按照雷达工作的时序和数据率使雷达回波数据由光纤板传输至实时处理系统。分别设计软件同步控制方法和硬件同步控制方法,保证多板卡数据回放的同步性。测试结果表明,该系统实现了宽、窄带雷达回波数据的板间同步回放,各数据类型分别支持6路并行数据通道,数据回放峰值速率可达1 920 MB·s^-1。文中系统可依托雷达原有硬件平台实现,无需增设板卡和线缆,具有良好的集成性与通用性,目前已被应用于某多功能相控阵雷达中。     

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13 μm–0.16 μm to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.     

THz antennas design,developments, challenges,and applications: A review

Terahertz (0.1–10 THz) wireless communication will be the future technology to reach a top-notch data rate. THz is one of the most promising candidates for 6G systems because it provides enormous bandwidth, up to 100 GHz, and a massive data rate of up to 1 Tbps. THz antennas, antenna arrays, and MIMO antenna arrays in 6G are hot research topics for implementing 6G wireless communication systems. The 6G aims to continue to enhance the features of the 5G as it is capable of achieving the maximum high-speed data rate, excellent reliable communication, massive connectivity, and very low latency connectivity. The 6G requirements need high-gain antenna arrays and MIMO antenna arrays to combat the effect of atmospheric losses in high frequencies. An in-depth discussion of the planar THz antennas that have been extensively used in THz applications like imaging, sensing, and Internet-of-Things (IoT) has been conducted. The study of the THz antennas, antenna arrays, and MIMO antennas on different conducting materials such as copper and graphene, which are designed on different dielectric substrates such as polyimide, quartz, liquid crystalline polymer, and polytetrafluoroethylene, has been carried out in detail. Metamaterial, photoconductive, plasmonic antennas, and THz beamforming are significant parts of THz communications. This paper also provides antennas and antenna arrays based on them.     

ESPAR array design for the UHF RFID wireless sensor communication system

In this paper, in order to improve the received signal strength (RSS) and signal quality, three arrays of electronically steerable parasitic array radiator (ESPAR) antennas are suggested for the ultra-high frequency (UHF) radio frequency identification (RFID) communication and sensing system applications. Instead of the single antenna, the array antennas have recently been widely used in many communication systems because of their peak gains, better radiation patterns, and higher radiation efficiency. Also, there are some important issues to use the antenna array like high data rates in wireless communication systems and to better understand the many targets or sensors. In this article, a wireless sensor network (WSN) is being investigated to overcome multipath fading and interference by antenna nulling technology that can be achieved through beam control ESPAR array antennas. The proposed ESPAR array antennas exhibit higher gains like 9.63, 10.2, and 12 dBi and proper radiation patterns from one array to another. Moreover, we investigate the mutual coupling effect on the performance of array antennas with different spacing (0.5λ, 0.75λ, λ) and configurations. It is found that the worst mutual coupling reduced by −28 to −34 dB for 2 × 2 array, −3 to −43 dB for 2 × 3 array, and finally −42 dB to −51 dB due to the antenna spacing from 0.5λ to λ. Thus, these suggested antennas could effectively be applied in the WSN communication systems, internet of things (IoT) networks, and massive wireless and backscatter communication systems.     

混响噪声下声源定位与跟踪的多特征自适应IMM粒子滤波算法EI北大核心CSCD

针对混响噪声下声源定位精度低和鲁棒性弱等问题,提出了多特征自适应IMM粒子滤波算法.该算法以麦克风接收信号的多特征作为观测信息,采用空时相关和迭代滤波建立了时延选择机制和波束输出能量优化机制,并在两者的基础上构建了似然函数以获得合理的声源位置信息.考虑到说话人运动的随机性,给出了自适应IMM算法,通过在线粒子集生成并将不同过程方差的模型进行交互来拟合说话人的不同运动模式,改善了说话人跟踪系统的稳健性.仿真和实测结果表明,所提算法利用了多特征定位信息的互补性,降低了观测误差不确定性对声源位置估计的影响,增强了随机运动声源跟踪系统的鲁棒性,提高了系统的定位精度.     

基于FPGA的高性能可编程数据平面研究综述

可编程数据平面(PDP)一方面支持网络应用的卸载与加速, 给网络应用带来了革命性的发展机遇; 另一方面支持新协议、新服务的快速实现和部署, 促进了网络创新和演进, 是近年来网络领域的研究热点. FPGA因其通用的计算架构、丰富的片内资源和扩展接口提供了多种可编程数据平面的具体实现, 支持更广范围的应用场景. 同时, FPGA还为探索更通用的可编程数据平面抽象提供了可能. 因此, 基于FPGA的可编程数据平面受到了学术界与产业界的广泛关注. 首先分类别阐述基于FPGA的可编程数据平面(F-PDP)抽象. 接着, 介绍基于F-PDP快速构建网络应用的关键技术的研究进展. 之后, 介绍基于F-PDP的新型可编程网络设备. 此外, 从提升网络性能、构建网络测量框架以及部署网络安全应用这3个方面, 详细梳理近年来基于F-PDP的应用研究成果. 最后, 探讨F-PDP未来可能的研究趋势.