火焰发射光谱法联合测定磷矿石和磷精矿中氧化钾及氧化钠

采用双通道的FP-640火焰光度计对磷矿中钾、钠元素进行联合测定试验。试验结果表明：在0．1％～1.0％区间内，K2O的相对标准偏差(RSD)为1．88％～2．93％，回收率为96．6％～102．7％；Na2O的相对标准偏差(RSD)为1．05％～2．10％，回收率为97．3％～101．2％。     

Discrete-continual model of flame propagation in a gas suspension of metal particles. I. One-dimensional approximation

Experimental data on combustion of magnesium particles in oxygen-containing gas mixtures are analyzed and generalized, which allowed us to develop a semi-empirical mathematical model that takes into account the integral effect of the initial particle size, pressure, and velocity of the oxidizing flow on combustion. Flame propagation in an air suspension of fine magnesium particles is considered in a one-dimensional approximation. For this purpose, a discrete-continual model of flame propagation in a gas suspension of metal particles is developed. The flammability limits in a vessel, caused by heat losses into the ambient medium and by spatial nonuniformity of the distribution of disperse-phase particles, are numerically determined, and the influence of nonuniformity and bidispersion of a one-dimensional ensemble of particles on flame characteristics is studied.__________Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 2, pp. 81–93, March–April, 2005.     

Photocatalytic mineralisation of organic compounds: a comparison of flame-made TiO2 catalysts

A comparative photocatalytic analysis was carried out on TiO₂ made in a Flame Spray Pyrolysis (FSP) process and flame-made Degussa P25. Both have similar crystallinity, phase composition, phase segregation and a non-porous surface. Hence comparison was made based on their difference in specific surface area, organic adsorption and the amount of OH• generated upon illumination. The photocatalytic activity tests were carried out using the following series of organic compounds: sucrose, glucose, fructose, maleic acid, glyoxylic acid, oxalic acid, isobutyric acid, phenol and methanol. FSP-made TiO₂ outperformed P25 for saccharides mineralisation, while for phenol and methanol mineralisation P25 was better than FSP-made TiO₂. Similar mineralisation rates were observed for both FSP-made and P25 TiO₂ for the mineralisation of carboxylic acids. This shows that the relative performance of the photocatalysts depends on the type of organic compounds to be degraded. The high surface area and possibly a more efficient interfacial charge transfer of FSP-made TiO₂ provided an efficient pathway for saccharides mineralisation. As for phenol and methanol, the mineralisation rates were higher when using P25 due to the greater amount of OH• radicals generated by this photocatalyst. The fast mineralisation rates of carboxylic acids made degradation of these organic compounds to be less affected by the TiO₂ photocatalyst properties and conditions tested in this work.     

阻燃增塑剂溴化及溴氯化石蜡的合成工艺

综述了阻燃增塑剂溴化及溴氯化石蜡的各种合成工艺路线，讨论了相应的合成反应机理．包括反应历程和有关化学热力学计算，简要介绍了安徽省化工研究院已工业化的溴化及溴氯化石蜡合成工艺的特点。     

聚乙烯复合阻燃体系的研究及应用进展

综述了近年来国内外阻燃聚乙烯（PE）用有协同作用的复合阻燃体系：（1）卤-锑体系；（2）磷-氮体系；（3）金属氧化物体系；（4）膨胀型体系；（5）其他类等5类复合阻燃体系的研究和应用情况。     

PVC／OMMT／WF纳米复合材料性能研究

对蒙脱土进行有机改性制得有机蒙脱土（OMMT），并制备了聚氯乙烯侑机蒙脱土／木粉（PVC／OMMT／WF）纳米复合材料。采用硅烷偶联剂对木粉表面进行改性，有效提高了聚氯乙烯／木粉（PVC／WF）复合材料的力学性能，其中加入1．5％（质量含量，下同）硅烷偶联剂可使复合材料的冲击强度和拉伸强度分别提高14．8％和18．5％。研究了OMMT的加入对木粉改性前后的PVC／WF复合材料力学性能、耐热性能及阻燃性能的影响，结果表明，木粉未经改性时，OMMT加入无助于PVC／OMMT／WF复合材料力学性能的提高；木粉用硅烷偶联剂改性后，添加少量的OMMT，可使PVC／OMMT／WF复合材料的冲击强度和拉伸强度明显提高。研究表明，添加OMMT可显著延迟复合材料的点燃时间，燃烧残余率也明显增加，OMMT是PVC／WF复合材料的高效阻燃剂。     

纸面稻草板阻燃性能的改进研究

本文就纸面稻草板阻燃性能及其环保安全进行探讨。在覆面胶粘剂中加入氮-磷阻燃剂增强耐火性，结果表明：阻燃剂含量25％时，阻燃效果良好，耐火极限明显延长；同时将胶粘剂中游离甲醛含量降低至0．063％，达到国家的环保要求。     

PET共聚阻燃改性研究进展

该文综述了近年来聚对苯二甲酸乙二醇酯(PET)以共聚改性方式制备高性能阻燃PET的最新研究进展,主要从磷系共聚阻燃、高温交联、高温重排、高温离子聚集和高温端基捕获链扩展5个方面对阻燃改性PET的阻燃机理和阻燃性能进行阐述,并总结了不同阻燃共聚改性方法的特点,对未来PET共聚阻燃的研究方向提出展望.