我国结构抗浮水位研究现状与展望

目前我国结构抗浮水位方面研究成果虽然很丰富, 但分歧很大, 不仅直接影响了实际工程中的应用, 同时也造成了研究工作自身缺乏系统性和延续性。为解决这一问题, 利用水文学、水力学和土力学等科学理论, 分别从抗浮水位基本概念、抗浮水位分析中两个基本问题(孔隙水压力和远期最高水位)的方法论和抗浮水位分析的技术体系等3个角度对既有研究成果进行了系统综述与客观分析。在抗浮水位基本概念方面, 根据地下水赋存和渗流理论, 将目前研究成果划分为二维、准三维和三维等3种类型, 提出了各自的数学表达式, 分析了三者之间逻辑关系, 讨论了各自的科学性和适用性。在孔隙水压力分析方法方面, 尤其是孔隙水压力折减问题, 对基于渗流理论和有效应力原理的经典分析方法进行系统评述的同时, 还对当前讨论热烈的基于结合水理论的分析方法进行了梳理评价。在地下水远期最高水位预测方面, 着重讨论了历史最高水位法、基于宏观数据反演法和数值分析法等3种方法的优缺点及需要完善之处。在抗浮水位分析技术体系方面, 以北京地区为例对该类问题作了简要总结与评述。最后, 对抗浮水位研究与应用现状进行了概要性评述, 并结合我国国情, 对未来工作提出了展望与建议。     

电镀综合废水处理技术

电镀行业普遍存在废水处理不够彻底的排放问题。针对这种现状，本文提出首先必须对生产线上的电镀废液进行种类及清污分流，并应用化学絮凝—气浮法一体化的处理技术对综合废水进行处理。试运行情况表明，该处理技术易于控制、占地面积小、运行费用低，处理后的废水可以达到GB8978—1996二级标准，去除率在96％以上，并有65％以上的处理水可以回收利用。     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

MOBILIZATION OF SLUDGE IN HORIZONTAL CYLINDRICAL TANKS WITH SUBMERGED NOZZLES

Over 378,000 m³ (100 million gal) of radioactive waste is being stored in hundreds of tanks at several U.S. Department of Energy (DOE) sites. The environment within the tanks is highly radioactive and chemically harsh. The waste typically consists of a heterogeneous sludge layer covered by a layer of supernatant. A few of the tanks have leaked to the environment, while others are corroding. Removing the waste from the tanks and processing it to a stable final form are desired to prevent any additional contamination of the environment. The tanks vary in size and geometric shape and do not have systems for removing the sludge waste.

Mobilization and mixing studies were conducted with a surrogate sludge (e.g., kaolin clay) using submerged jets in two sizes of horizontal tanks with nominal capacities of 0.87 m³ (230 gal) and 95 m³ (25,000 gal). Mobilization efficiencies and mixing times were determined for single and bidirectional jets in both tanks with the discharge nozzles positioned at various locations in the tanks. Approximately 80% of the surrogate sludge was mobilized in the 95-m³ tank using a fixed bidirectional jet (inside diameter = 0.035 m) and a jet velocity of 6.4m/s (21 ft/s). The effective cleaning length, which is defined as the distance between the jet and the edge of the remaining sludge bank, was approximately 3.2 m (10 ft) on each side of the bidirectional jet.     

纺丝组件三甘醇清洗系统的改造

介绍了三甘醇 (TEG)清洗系统的工艺流程和所存在的主要问题是自然冷却时间太长和TEG蒸气泄漏。提出该系统的改造方案为变自然冷却为强制风冷 ,把清洗釜盖的密封改为榫槽式 ,使改造后的TEG清洗系统达到了国际通用的HSE(健康、安全、环境 )的标准 ,缩短了TEG清洗后的冷却时间 ,罐体密封更加严密 ,清洗快捷、方便     

2000m3低温丙烯球罐球壳板型式和材料的选择

大型球罐球壳板型式和材料的选择是设计的首要环节,从这两方面论述了设计时选择的过程。     

基于FLUENT振荡浮子式波浪能转换装置浮子的数值仿真

基于VOF模型,运用三种不同的造波方法建立了二维数值波浪水槽,并对其进行了比较,选取了在特定波况下较为合适的数值水槽。基于该数值波浪水槽,考察了波浪作用下的运动状态以及受力状态,为波能转换器的设计提供指导。     

坦克装甲车辆用橡胶履带板的研究开发

探讨了坦克装甲车辆用橡胶履带板（ＴＴＲＰ）的损坏摸式及其机理，从胶料配合，性能测试等方面评 ＴＴＲＰ的研究开发进展，并对我国ＴＴＲＰ的研究提出了建议。     

Modeling of solid—liquid adsorption: Effects of adsorbent loads on model parameters

The adsorption of cobalt phthalocyanine dye onto activated carbon in a continuous stirred tank adsorber was studied. The variables investigated were: adsorbent mass, adsorbent particle size and fluid flowrate. Several models based on film, pore and surface diffusion were constructed and fitted to the experimental data. Experimental results showed: (i) the increasing importance of the film mass transfer resistance for increasing adsorbent loads; (ii) the increasing importance of the surface diffusion mechanism for increasing adsorbent loads; and (iii) the better discrimination among different models for higher adsorbent loads and lower flowrate.     

3-D hydrodynamics generated in a stirred vessel by a multiple-propeller system

The aim of this study is to optimize the position and the number of propellers in a non-standard tall vessel. Laser sheet flow visualization experiments were carried out for selected geometrical arrangements which produced stable flow patterns and good transport between the propellers. Four double-propeller arrangements corresponding to frequent industrial cases and a three-propeller system have been chosen. Comparison of LDA measurements in the r-z plane, dimensionless global parameters N_Qp, Nt_m, N_p, E_p and spatial distribution of local energy dissipation rate ? shows that a three-propeller system is the most efficient.