A new surface characterization technique: RIMAPS (Rotated Image with Maximum Average Power Spectrum)

This work introduces a new imaging technique, Rotated Image with Maximum Average Power Spectrum (RIMAPS), for use in determining orientation and characteristics of surface topography. It consists of computing the maximum value of the averaged power spectrum, given by one step of the two‐dimensional Fourier transform, for each angle of rotation of a digitized image. The basic measurement science of this technique is described and different cases are studied. The characterization of simple geometrical figures explains the meaning of peaks and their angular positions given by RIMAPS analysis. A known surface pattern made on a sample of pure copper, mechanically ground, is used to study reproducibility, dependence on image quality and topography scale relative to pixel size and magnification. Samples of pure zinc, mechanically ground and chemically etched, were used to show the main features of RIMAPS analysis when characterizing a more complicated pattern on a real surface. All the studies performed under different conditions for observation and acquisition of images give strong evidence of the stability and robustness of RIMAPS as a technique for the characterization of topography.     

用小波变换抑制SAR图像中的斑点噪声

抑制合成孔径雷达图像中的斑点噪声一直是处理图像并得到准确图像信息的难点，提出了一种基于小波变换抑制合成孔径雷达（SAR）图像中的斑点噪声的方法，对原有的小波变换方法作了改进，能更好地保留图像的边缘信息，并能简化计算量。在仿真实验中使用了合成的模拟图像和真实的合成孔径雷图像，并与以往的小波去噪滤波方法以及一些经典的斑点噪声滤波方法（包括中值滤波，Lee滤波，Frost滤波）进行比较，在综合考虑了滤波算法在均匀区域对斑点噪声的抑制能力以及保留边缘信息能力的情况下，提出的算法有更好的效果。     

降低雷达接收机中噪声的几种方法

噪声是影响雷达接收机灵敏度的重要因素。本文通过讨论雷达接收机噪声的来源，分析并提出了集中降低雷达接收机内部和外部噪声的几种方法，具有一定的实际意义。     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

Ultrahigh-performance FFTs for the CRAY-2 and CRAY Y-MP supercomputers

In this paper a set of techniques for improving the performance of the fast Fourier transform (FFT) algorithm on modern vector-oriented supercomputers is presented. Single-processor FFT implementations based on these techniques are developed for the CRAY-2 and the CRAY Y-MP, and it is shown that they achieve higher performance than previously measured on these machines. The techniques include (1) using gather/scatter operations to maintain optimum length vectors throughout all stages of small-to medium-sized FFTs, (2) using efficient radix-8 and radix-16 inner loops, which allow a large number of vector loads/stores to be overlapped, and (3) prefetching twiddle factors as vectors so that on the CRAY-2 they can later be fetched from local memory in parallel with common memory accesses. Performance results for Fortran implementations using these techniques demonstrate that they are faster than Cray's library FFT routine CFFT2. The actual speedups obtained, which depend on the size of the FFT being computed and the supercomputer being used, range from about 5 to over 300%.     

DC-DC电荷泵的研究与设计

以Dickson电荷泵的基本原理为出发点，研究了一种将正电压输入转为负电压输出的开关电容电路。由于开关电容的充放电特点，为确定电容时间常数，采用非交叠时钟控制信号避免了由于时钟交叠而造成的当电容充电还未完成即对下一级电容进行放电的现象。同时，参考功率MOS-FET的电容模型通过增大驱动电路的电流减小了开关管的上升延时，提高了开关动作的速度，使转换效率得到明显提高。此电路结构简单，性能优良，易于集成，可广泛应用于输出负电压的电源产品中。     

估计小波系数方差邻域大小的研究

利用小波变换去噪时小波系数方差的估计对去噪结果影响很大。自然图像小波分解后得到的系数在不同的分辨率中差异很大,所以利用邻域估计中心点方差时,不同分辨率应有不同大小的邻域。首先对在邻域中利用极大似然准则估计中心点方差进行分析,再结合自然图像小波分解后的系数在不同分辨率子带中,根据平稳性和重要性选择邻域的大小。最后进行去噪实验,并取得正交小波分解下理想的去噪性能。     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.     

基于数字化二次曝光干涉的光学元件波前畸变测量

将傅立叶变换条纹分析方法与二次曝光全息干涉计量相结合，提出了数字化二次曝光干涉术，用于测量光学元件引入的波前畸变。文中给出了理论分析，模拟与光学实验结果证实提出的方法具有高精度、快速的波前测量特点，可应用于激光系统中光学元件的波前畸变在线检测。     

拉普拉斯变换的图形分析

以单边指数函数为例，分析了拉普拉斯变换象函数F(s)在其收敛域内随σ和ω的变化规律，通过|F(s)|曲面图来观察这些规律，并解释了图中某些特定点及剖面的含义，以形象化的方式加深对拉普拉斯变换的认识。借助MATLAB的绘图功能绘制出F(s)的曲面图、剖面图及信号的频谱图，从中可以观察到频域与复频域的关系以及系统函数的零极点分布等。