塔机动态特性的研究

分析、比较了当前塔式起重机动态特性研究中几种常用的方法，着重介绍了动力有限元法，利用ＡＬＧＯＲ有限元软件对实例进行了计算，得到了满意的结果。     

An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics

This paper analyzes the formulation of energy preserving/decaying schemes for dynamics problems. We argue that any energy preserving/decaying scheme can always be seen as composed of an underlying temporal discretization, that is then slightly modified in order to prove a discrete energy bound within a time step. While the details of the modified scheme depend in a critical way on the governing equations, the underlying discretization can in principle be applied to a variety of models. We review some of the temporal underlying schemes recently proposed in the literature, presenting them with a common notation. We show their similarities and highlight their differences.     

Computer Solutions in Choosing Automatic Process Regulators

The paper discusses the use of the URA software for choosing automatic regulators and calculating their setting parameters, as it is intended for simulating transient response by computer.     

交流同步电动机传动系统在天钢高线厂的应用

介绍了天钢集团高速线材厂精轧机传动控制系统的构成、基本控制原理和控制方式。该传动系统在生产中应用,具有可靠性高、维护量小,调速范围宽的优点。     

Structured Latent Curve Models for the Study of Change in Multivariate Repeated Measures.

This article considers a structured latent curve model for multiple repeated measures. In a structured latent curve model, a smooth nonlinear function characterizes the mean response. A first-order Taylor polynomial taken with regard to the mean function defines elements of a restricted factor matrix that may include parameters that enter nonlinearly. Similar to factor scores, random coefficients are combined with the factor matrix to produce individual latent curves that need not follow the same form as the mean curve. Here the associations between change characteristics in multiple repeated measures are studied. A factor analysis model for covariates is included as a means of relating latent covariates to the factors characterizing change in different repeated measures. An example is provided. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phase I IASC-ASCE Structural Health Monitoring Benchmark Problem Using Simulated Data

Structural health monitoring (SHM) is a promising field with widespread application in civil engineering. Structural health monitoring has the potential to make structures safer by observing both long-term structural changes and immediate postdisaster damage. However, the many SHM studies in the literature apply different monitoring methods to different structures, making side-by-side comparison of the methods difficult. This paper details the first phase in a benchmark SHM problem organized under the auspices of the IASC–ASCE Structural Health Monitoring Task Group. The scale-model structure adopted for use in this benchmark problem is described. Then, two analytical models based on the structure—one a 12 degree of freedom (DOF) shear-building model, the other a 120-DOF model, both finite element based—are given. The damage patterns to be identified are listed as well as the types and number of sensors, magnitude of sensor noise, and so forth. MATLAB computer codes to generate the response data for the various cases are explained. The codes, as well as details of the ongoing Task Group activities, are available on the Task Group web site at 〈http://wusceel.cive.wustl.edu/asce.shm/〉.     

Harmonic solution of semiconductor transport equations for microwave and millimetre-wave device modelling

The hydrodynamic transport equations for charges in a semiconductor have been solved for a periodic excitation by means of a harmonic approach, in order to model microwave and millimetre-wave active devices. The solution is based on the expansion of physical variables in a Fourier series in the time domain, and on discretisation in the space domain. A waveform-balance technique in the TD is used to solve the nonlinear equations system. This approach allows for a longer time step with respect to standard TD solutions for most cases of interest, greatly reducing simulation time by at least two orders of magnitude in typical cases. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14: 36–48, 2004.     

Multistage solid-state power amplifier design by a new alternative synthesis technique

For the first time, the numerical real-frequency technique has been applied to the design of a nonlinear power amplifier. This synthesis technique does not require any transistor model by directly using measured large-signal S-parameters of the power transistor device. The double power-frequency dependence of these S-parameters requires the use of a bidimensional interpolation (spline functions). With the Levenberg–Marquardt optimization and large-signal S-parameters, a specific CAD program optimizes the added-power in order to synthesize the matching networks of the PA. The simulated and measured results of two S-band power amplifiers validate the new synthesis approach. © 2004 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 87–98, 2004.     

Repair of notched beam under dynamic load using piezoelectric patch

In this paper, the repair of a cracked beam under an external dynamic load employing the electro-mechanical characteristic of piezoelectric material to induce a local moment is presented. Conceptually, an external voltage is applied to actuate a piezoelectric patch bonded on the beam to effect closure of a crack so that the singularity at the crack tip under dynamic load may be decreased. Globally, this has the effect of altering the resonant frequency of the cracked beam towards that of the healthy beam, which is the criterion used for the repair. To demonstrate the repair methodology, a cantilever beam is used as an illustration, where the repair moment coefficient and the voltage required are mathematically derived. The relationship between repair moment coefficient, crack parameters and length of piezoelectric patch is investigated. The difference between the proposed repair criterion and an earlier published criterion for cracked beam under static load is also shown. A numerical example is used to study the effectiveness of the proposed repair methodology and its results are compared with those from 3-D finite element analyses using ABAQUS 6.4 as one means of verification.     

考虑风电接入和气电转换的综合能源系统日前区间优化

针对气电综合能源系统优化调度中未充分挖掘可调度因素、未充分考虑风电预测误差不确定性的现状,研究含风电的气电综合能源系统日前区间优化调度方法。首先,基于区间数学对风电出力的不确定性进行区间描述,综合考虑抽水蓄能、气电双向转换以及需求响应等资源和技术,并用区间数学表示优化目标和优化约束,构建含高比例风电的气电综合能源系统日前优化模型,综合优化系统的经济性、环保性。然后,基于区间序关系和可能度的方法将区间优化模型转化为确定性优化模型,继而采用Jaya算法进行求解,保证求解的高效性和解空间的可行性。最后,进行算例分析,仿真结果验证了综合利用抽水蓄能、气电双向转换以及需求响应等要素对系统进行区间优化,能取得优化效果上的优势,并能为系统调度人员提供风电不确定度对系统优化影响的信息。