Continuous cleaning of A356 alloy melt using high frequency electromagnetic field

A set of device for electromagnetic separation (EMS) was designed and applied to process the continuous flowing melt. Tensile test was employed to compare effect of electromagnetic separation with that of the traditional processes. Compared with filtration by ceramic foam filter and process without filtration, multiple process combined with filtration and electromagnetic separation can effectively remove most of inclusions with diameter finer than 10μm in A356 alloy casting, hence improve its tensile properties. After being processed by electromagnetic filtration,the tensile strength of A356 scrap is enhanced by 8.27%, approaching the level of fresh A356 alloy.     

实用M2052合金阻尼行为表征

名义组分为Mn-20Cu-5Ni-2Fe(原子分数，％)的M2052合金，具有很高的强度和阻尼性能．对该合金在不同条件下的阻尼性能采用多种方法进行了表征．该合金的高阻尼态出现在一个临界温度以下，该温度可以通过改变组分和热处理来调整．合金的室温阻尼性能强烈地依赖于频率、应变振幅以及静载荷的大小．     

变频器在机床电力拖动中的应用问题

本文分析了机床拖动的特点,变频调速对电动机及变频器的要求,分析了变频器应用中的干扰问题及采取的抑制措施。     

超声波对沉淀二氧化硅的分散解聚研究

研究了超声波对沉淀二氧化硅的分散解聚效果，实验证明，当频率为40kHz，功率密度达到1．8W/cm^2时，沉淀二氧化硅浆料可以获得极佳的分解效果，二氧化硅聚集体小于77．6nm的颗粒数量达98．9％。     

黄金峡水利枢纽工程大型水泵机组选型设计及运行调节研究

引汉济渭工程黄金峡水利枢纽是陕西省境内一项重要的大型跨流域调水工程,泵站装机容量和设计流量均为目前国内甚至亚洲在建和已建泵站之最,且调水过程复杂、调水流量分布范围宽广。在分析黄金峡泵站调度原则及运行方式的基础上,综合比较目前国内外大型泵站机组设计制造水平、枢纽建筑物及机电设备投资等因素,详细论证了大型单级单吸离心式水泵机组台数和性能参数的确定方法及其影响因素,并给出了黄金峡泵站机组选型设计的最优方案,同时论证了采用变频调节的必要性及其效果。研究结果可为大型调水泵站机组的选型设计提供参考。     

Response of the seated human body to whole-body vertical vibration: biodynamic responses to sinusoidal and random vibration

The dependence of biodynamic responses of the seated human body on the frequency, magnitude and waveform of vertical vibration has been studied in 20 males and 20 females. With sinusoidal vibration (13 frequencies from 1 to 16 Hz) at five magnitudes (0.1–1.6 ms^? 2 r.m.s.) and with random vibration (1–16 Hz) at the same magnitudes, the apparent mass of the body was similar with random and sinusoidal vibration of the same overall magnitude. With increasing magnitude of vibration, the stiffness and damping of a model fitted to the apparent mass reduced and the resonance frequency decreased (from 6.5 to 4.5 Hz). Male and female subjects had similar apparent mass (after adjusting for subject weight) and a similar principal resonance frequency with both random and sinusoidal vibration. The change in biodynamic response with increasing vibration magnitude depends on the frequency of the vibration excitation, but is similar with sinusoidal and random excitation.     

Response of the seated human body to whole-body vertical vibration: discomfort caused by sinusoidal vibration

Frequency weightings for predicting vibration discomfort assume the same frequency-dependence at all magnitudes of vibration, whereas biodynamic studies show that the frequency-dependence of the human body depends on the magnitude of vibration. This study investigated how the frequency-dependence of vibration discomfort depends on the acceleration and the force at the subject–seat interface. Using magnitude estimation, 20 males and 20 females judged their discomfort caused by sinusoidal vertical acceleration at 13 frequencies (1–16 Hz) at magnitudes from 0.1 to 4.0 ms^? 2 r.m.s. The frequency-dependence of their equivalent comfort contours depended on the magnitude of vibration, but was less dependent on the magnitude of dynamic force than the magnitude of acceleration, consistent with the biodynamic non-linearity of the body causing some of the magnitude-dependence of equivalent comfort contours. There were significant associations between the biodynamic responses and subjective responses at all frequencies in the range 1–16 Hz.

Practitioner Summary: Vertical seat vibration causes discomfort in many forms of transport. This study provides the frequency-dependence of vibration discomfort over a range of vibration magnitudes and shows how the frequency weightings in the current standards can be improved.     

A 5 GHz LC-VCO frequency synthesizer for unlicensed band of WiMAX

This paper presents a low power and low phase noise CMOS integer-N frequency synthesizer based on the charge-pump Phase Locked Loop (PLL) topology. The frequency synthesizer can be used for IEEE 802.16 unlicensed band of WiMAX (World Interoperability for Microwave Access). The operation frequency of the proposed design is ranged from 5.13 to 5.22 GHz. The proposed Voltage-Controlled Oscillator (VCO) achieves low power consumption and low phase noise. The high speed divider is implemented by an optimal extended true single phase clock (E-TSPC) prescaler. It can achieve higher operating frequency and lower power consumption. A new frequency divider is also proposed to eliminate the hardware overhead of the S counter in the conventional programmable divider. The proposed frequency synthesizer consists of a phase-frequency detector (PFD), a charge pump, a low-pass loop filter, a VCO, and a frequency divider. The simulated phase noise of the proposed VCO is −121.6 dBc/Hz at 1 MHz offset from the carrier frequency. The proposed frequency synthesizer consumes 13.1 mW. The chip with an area of 1.048 × 1.076 mm² is fabricated in a TSMC 0.18 μm CMOS 1P6M technology process.     

变频器在氯碱生产中的应用

介绍了交流电机变频调速的原理和注意事项,以便合理地使用变频器。