计及PMU的混合非线性状态估计新方法

提出一种将同步相量测量单元（PMU）的直接电压相量量测变换为间接支路电流量测，并与监控与数据采集（SCADA）量测量一起进行混合迭代的非线性状态估计方法。对构造等效电流修正量而带来的间接量测误差进行了详细和定量的分析，并对该混合估计算法的精度进行了定性分析和定量计算。理论分析和算例表明，该方法可以获得较高的估计精度，在收敛次数和滤波效果上也有所改进。     

9200kW同步电动机全压异步启动及其励磁装置

从结构性能、直接启动、励磁装置等方面全面介绍了大型同步电动机全压异步启动的方法。     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

混合集成型光学拾音器的设计与制作

通过混合集成型结构光学拾音器的光学设计和芯片设计，制作了包含微光学棱镜，光电探测器和信号放大电路的混合集成型光学拾音器。经过测试，发现有较好的信号输出特性，表明混合集成型光学拾音器已基本研制成功。     

加氢催化剂器外再生技术(HCRT)的开发与应用

淄博恒基化工有限公司开发的加氢催化剂器外再生技术 (HCRT) ,具有工艺合理、再生催化剂物性恢复好、活性损失少等特点 ,该技术已达到国外器外再生技术的水平。近年来已再生全国 19个炼油厂、2 3个品种的催化剂 12 95t,工业应用均取得满意结果     

全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％     

我国有线电视事业的现状和发展

本文详细系统地介绍了我国有线是视发展历史和现状，及其经营和管理方法。重点介绍了北美的ＣＡＴＶ技术发展动向。最后，指出我国ＣＡＴＶ事业发展中的应用重视的问题。     

3961连续重整催化剂性能考察

新一代高活性，高水热稳定性3961（PS－Ⅳ）型连续重整催化剂于1996年在上海石化芳烃厂400kt/a连续重整装置上首次进行工业应用试验。开工5a，催化剂跟踪分析结果表明，该剂保持了良好的物化性质和反应性能，表现为良好的比表面积稳定性和持氯能力，经过200个以上再生周期的催化剂未发现有明显的相变和金属分散度的变化。     

FAFFA加速的PO-MM研究复杂金属载体上线天线电磁特性

本文提出了一种快速远场近似(FAFFA)加速的混合物理光学矩量法(POMM),利用FAFFA加速计算矩阵方程中的矩阵矢量积,明显提高了计算效率.对物体表面上的远场组之间的耦合作用推导出了一组简洁的计算公式,并分析了计算复杂度.复杂金属组合体上线天线输入导纳、互导纳和方向性图的计算结果与文献结果一致.利用该方法分析计算了一个舰船模型上线天线的电磁特性.数值结果表明了这种方法的正确性和工程应用中的有效性.     

Experiences with a parallel algorithm for data flow analysis

We have designed a family of parallel data flow analysis algorithms for execution on distributed-memory MIMD machines, based on general-purpose, hybrid algorithms for data flow analysis [Marlowe and Ryder 1990]. We exploit a natural partitioning of the hybrid algorithms and explore a static mapping, dynamic scheduling strategy. Alternative mapping-scheduling choices and refinements of the flow graph condensation used are discussed. Our parallel hybrid algorithm family is illustrated on Reaching Definitions, although parallel algorithms also exist for many interprocedural (e.g., Aliasing) and intraprocedural (e.g., Available Expressions) problems [Marlowe 1989]. We have implemented the parallel hybrid algorithm for Reaching Definitions on an Intel iPSC/2. Our empirical results suggest the practicality of parallel hybrid algorithms.An earlier version of this paper was presented at Supercomputing '90.The research reported here was supported, in part, by the New Jersey Commission on Science and Technology and the CAIP Center's Industrial Members, by Siemens Research Corporation and by National Science Foundation grant CCR-8920078.