Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

DNA-inorganic hybrid material as selective absorbent for harmful compounds

Double-stranded DNA is one of functional polymers, but the large amounts of DNA sources, such as salmon milt and shellfish gonads, have been discarded as industrial wastes. Therefore, conversion of this discarded DNA to be a useful material would be beneficial to utilize the unique property of DNA. These materials including DNA have been prepared by mixing with the organic polymers, such as alginic acid, collagen, and chitosan. However, since these materials have consisted from entirely organic components, these do not have the mechanical strength for a material. So, we prepared the organic-inorganic hybrid materials by mixing DNA with silane coupling reagents bis(trimethoxysilylpropyl)amine or bis[(3-trimethoxysilyl)propyl]ethylenediamine. These hybrid materials with the flexibility were water-insoluble and resistant to hydrolysis by nuclease. In addition, the mechanical strength of this hybrid material was approximately twice as high as that of DNA without mixing with silane coupling reagents. Furthermore, the double-stranded DNA in the hybrid materials has been maintained in a B-form structure in aqueous solution. Thus, we demonstrated the utilization of DNA as a functional material. As a result, this material could selectively accumulate harmful DNA-intercalating compounds with the planar structure, such as dibenzo-p-dioxin, dibenzofuran, and ethidium bromide. Organic-inorganic hybrid material including double-stranded DNA has potential to serve as a useful biomaterial for medical, engineering, and environmental applications.     

热成像技术在厚膜混合集成电路热设计中的应用

本文简述了红外热成像技术用于厚膜混合集成电路热设计中的理论与实验方法，并讨论了结果。     

Buckling optimization of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure

This paper describes a method of analyzing the maximum buckling strength of hybrid-fiber multilayer-sandwich cylindrical shells under external lateral pressure with respect to fiber orientations and weighting factors. Formulae for optimizing these parameters are presented and conditions for the application of these formulae are discussed. A discriminant is derived for assessing whether the hybrid sandwich cylindrical shells for given different unidirectional composites should reach the extreme value of critical pressure.     

三维方腔流的混合有限分析解

本文建立了三维对流扩散方程的混合有限分析八点隐格式，并证明了它的基本数学性质。应用原函数法和交错网格技术给出了三维Ｎ—Ｓ方程的混合有限分析解法，计算了雷诺数Ｒｅ＝２０、５０和１００三种情况下的三维方腔内的流场，结果与已有计算成果一致。     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

OCT-M FCC 汽油深度加氢脱硫技术的研究及工业应用

比较研究了MIP汽油与常规FCC汽油的特点，考察了抚顺石油化工研究院(FRIPP)开发的OCT-M催化汽油选择性加氢脱硫技术由MIP汽油与FCC汽油生产硫含量≯50µg/g汽油的情况下的辛烷值损失。工业应用结果表明，OCT-M技术将MIP汽油硫含量由417～442µg/g降低到24～53µg/g，RON损失0.7～1.8个单位。因此，OCT-M技术可为我国炼厂生产硫含量≯50µg/g的清洁汽油提供经济、灵活的技术方案。     

拼接式彩色等离子体大屏幕显示驱动电路的研究

针对拼接结构的高分辨率彩色等离子体大屏幕系统的应用，指出了刷新型电路模式的不足之处，提出了一种混合型模式的驱动电路。从彩色模块ＡＣＰＤＰ的结构特性出发，详细讨论了该电路的工作原理，驱动波形以及放电过程。     

微粒混凝土受压应力应变全曲线试验研究

采用一种特制的刚性辅助装置,进行了微粒混凝土和普通混凝土的应力应变全曲线试验研究,得到一系列应力应变曲线。对微粒混凝土和普通混凝土的立方体抗压强度与棱柱体抗压强度的关系、棱柱体抗压强度与峰值应力所对应应变的关系及棱柱体抗压强度与初始弹性模量的关系进行了分析,虽然微粒混凝土的力学性能与普通混凝土的力学性能存在一定的差别,但主要力学性能还是相似的,在模型试验中微粒混凝土是可以用来代替普通混凝土进行结构试验的。同时也验证了刚性辅助装置在测量微粒混凝土和普通混凝土的应力应变全曲线时的有效性。     

低压组合床重整工艺工业试验

介绍了国产500kt／a低压组合床催化重整装置首次在中国石化股份有限公司长岭分公司的工业试验情况。近两年的运转及标定结果表明试验是成功的，该技术达到了国外连续重整技术第一代与第二代之间的水平，并且投资小，适于小型固定床重整装置的改造。