基于模糊逻辑的电动汽车双源混合储能系统能量管理策略

针对电动汽车行驶过程中电池放电电流过大导致的电池容量衰减问题,构建了由锂离子动力电池、超级电容和多端口DC/DC变换器构成的全主动式混合储能系统,其中电流环控制器和电压环控制器分别控制输出电流和直流母线电压。结合超级电容SOC、整车需求功率和车速情况,根据建立的45条模糊控制规则,模糊逻辑控制器调节锂离子动力电池和超级电容的充放电功率,在车辆峰值功率需求较高时避免了高频电流波动对动力电池寿命的影响。同时在功率需求较低时,动力电池给超级电容充电。在HWFET工况下的实验结果表明所提出的全主动式双能量源混合储能系统和基于模糊逻辑的能量管理策略能够有效保护锂离子动力电池免受大电流波动影响,从而达到延长电池寿命的作用。     

绳牵引刚柔式波浪补偿并联机构的设计与建模

为了减少海上集装箱货物运输中风浪造成的损坏,提出刚柔混合驱动主动式波浪补偿并联机构. 基于刚柔混合并联机构的动定平台的矩阵旋转原理和几何封闭法建立位置逆解数学模型;利用空间几何原理构建机构位置正解数学模型;利用求导法则对位置逆解进行求导,建立速度雅可比矩阵与加速度的二阶影响矩阵;基于绳子是柔性变形体推导出系统刚度矩阵,探究影响系统刚度的因素和增加系统刚度的原则. 利用数值模拟仿真对运动学和系统刚度进行验证,结果表明位置正逆解的输入输出误差不超过实际误差的2.25%;发现理论仿真曲线和样机仿真曲线较吻合,误差不超过7.4%,验证了运动学模型的正确性;根据刚度矩阵发现刚度影响因素对系统刚度的影响规律. 通过对绳驱动刚柔混合驱动波浪补偿并联机构的实验验证,发现该机构的补偿效果均高于90%. 证明研究结果为刚柔混合主动式波浪补偿并联机构的运动和机构设计提供了理论支持.     

激光-电弧复合焊接过程中高频干扰的消除

激光-电弧复合焊接过程中,由于引孤产生的高频干扰了激光器的控制系统,造成了激光和电弧不能实现复合焊接.通过分析研究高频引弧对焊接电源和激光器的干扰途径,采取相应的措施,有效地消除了高频干扰问题,成功实现了激光和电弧之间的复合焊接.     

铝合金激光-电弧复合焊接工艺研究

对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。通过工艺试验,分析研究了焊接速度、激光焦点位置、钨极与激光束之间的距离、焊接电流对焊缝质量(熔深、熔宽)的影响规律。     

机动车辆装载问题的一种混合遗传算法实现*

针对货物装载地和运送目的地均已确定情况下的车辆装载问题,给出了基于遗传算法求解的数学模型,并对基本遗传算法的各个算子针对问题的特点提出了改进方法,同时引入启发式策略,形成了一种混合遗传算法.该算法的特点是各个算子都以提高算法收敛速度和解的最优性为目标,同时种群大小是动态变化的,以求在保证群体多样性的同时加快收敛速度.实验结果表明,该算法对求解此类问题是有效的.     

环氧树脂流变学的研究进展

综述了近20年来环氧树脂流变学的研究进展。利用流变学来指导环氧树脂的最新应用,包括环氧树脂电子浆料例如底部填充胶（underfill）,环氧树脂基复合材料,环氧树脂涂料,环氧树脂黏合剂,环氧树脂与其他树脂/橡胶的复合体系等。环氧树脂体系中的填料规格、加入量以及环氧树脂的固化过程与黏度等流变指数息息相关。随着芯片等领域技术的快速发展,流变学在环氧树脂中的应用还会得到进一步加强。     

Nickel-Carnosine complex:A new carrier for enzymes immobilization by affinity adsorption

Immobilization is an effective method to promote the application of enzyme industry for improving the stability and realizing recovery of enzyme.To some extent,the performance of immobilized enzyme depends on the choice of carrier material.Therefore,the development of new carrier materials has been one of the key issues concerned by enzyme immobilization researchers.In this work,a novel organic-inorganic hybrid material,nickel-carnosine complex (NiCar),was synthesized for the first time by solvothermal method.The obtained NiCar exhibits spherical morphology,hierarchical porosity and abun-dant unsaturated coordination nickel ions,which provide excellent anchoring sites for the immobiliza-tion of proteins.His-tagged organophosphate-degrading enzyme (OpdA) and ω-transaminase (ω-TA)were used as model enzymes to evaluate the performance of NiCar as a carrier.By a simple adsorption process,the enzyme molecules can be fixed on the particles of NiCar,and the stability and reusability are significantly improved.The analysis of protein adsorption on NiCar verified that the affinity adsorp-tion between the imidazole functional group on the protein and the unsaturated coordination nickel ions on NiCar was the main force in the immobilization process,which provided an idea way for the develop-ment of new enzyme immobilization carriers.     

 基于混合模型的优化低频低压减载方法研究

文中以低频低压情况下保证电压稳定的前提下减载为研究内容,提出了一种基于混合模型的优化低频低压减载方法。该混合模型将遗传算法与人工神经网络相结合,在保证电压稳定的情况下选择合适的节点进行负荷切除。实验结果表明,该方法可以在低频低压情况下使负荷减载量达到最小。     

微电网跟踪调度计划双层双时间尺度实时控制策略

为了提升微电网跟踪调度计划的能力,并降低分布式电源和负荷的功率波动对跟踪效果的影响,提出一种利用由超级电容和电池储能组成的混合储能系统跟踪调度计划的双层双时间尺度实时控制策略。上层基于模型预测控制方法建立日内滚动优化模型,结合分布式电源和负荷的超短期功率预测结果,综合考虑一段时域内的跟踪偏差及混合储能系统的功率和荷电状态对跟踪调度计划进行滚动优化;下层在上层优化结果的基础上,采用基于荷电状态的混合储能系统实时控制策略对超级电容和电池储能的实时功率进行协调分配,进一步降低分布式电源和负荷的实时功率波动对跟踪效果的影响。通过仿真算例对所提控制策略进行验证,结果表明:所提策略不但实现了良好的实时跟踪调度计划的控制效果,而且优化了超级电容和电池储能的荷电状态。     

Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high-power laser diode

Several studies have been undertaken recently to adapt yttria partially stabilized zirconia (YPSZ) thermal barrier coating (TBC) characteristics during their manufacturing process. Thermal spraying implementing laser irradiation appears to be a possibility for modifying the coating morphology. This study aims to present the results of in situ (i.e., simultaneous treatment) and a posteriori (i.e., post-treatment) laser treatments implementing a high-power laser diode. In both cases, the coatings underwent atmospheric plasma spraying (APS). Laser irradiation was achieved using a 3 kW, average-power laser diode exhibiting an 848 nm wavelength. Experiments were performed to reach two goals. First, laser post-treatments aimed at building a map of the laser-processing parameter effects on the coating microstructure to estimate the laser-processing parameters, which seem to be suited to the change into in situ coating remelting. Second, in situ coating remelting aimed at quantifying the involved phenomena. In that case, the coating was treated layer by layer as it was manufactured. The input energy effect was studied by varying the scanning velocity (i.e., between 35 and 60 m/min), and consequently the irradiation time (i.e., between 1.8 and 3.1 ms, respectively). Experiments showed that coating thermal conductivity was lowered by more than 20% and that coating resistance to isothermal shocks was increased very significantly.