纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

电厂电气运行中常见故障分析及其应对措施探讨

为了保证电厂的生产效率,必须要分析电气的运行特征,确定电气故障发生的原因,综合考虑多方面因素,选择切实可行的措施解决问题。简要分析了电厂电气运行常见故障发生原因,并提出了相应的解决措施。     

Correlation of reactivity and electrical resistivity of coke

A correlation between the reactivity and electrical resistivity of a series of cokes was determined using cokes prepared from blends of medium- and high-volatile coals. After correcting for the ash yield of the coke and the density of the resistivity specimen, a statistically significant relation between reactivity and resistivity was established. As the resistivity test requires much less time to perform than the reactivity test, it can be considered as an alternative approach to reactivity testing currently performed for quality control purposes.     

Studies on fluorinated polyurethanes by X-ray diffraction and density functional theory calculations with periodic boundary conditions

Thin-film wide-angle X-ray diffraction, small-angle X-ray scattering, and density functional theory calculations using B3LYP hybrid functional with the two-dimensional periodic boundary conditions (2D-PBC) have been applied to study the crystal structures of parent and fluorinated polyurethanes. The crystal structures from 2D-PBC-B3LYP calculation and experiments showed the hard-segment chains within crystallites adopted an extended-chain conformation for polyurethanes. Energetically, the parent polyurethane preferred an alternating hydrogen-bonded sheet structure while the fluorinated one adopted a progressive hydrogen-bonded sheet structure.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Electroless nickel plating on the surface of carbon fibers

The electroless nickel plating on the surface of carbon fibers was prepared by pretreating the carbon fibers in order to increase their conductivity,and consequently enhance the EMI shielding effectiveness of the composites.The relationship between the performance of depositing coat and pH value,temperature,reaction time and the way of agitation was studied.Results show that the depositing quality is stable under pH between 4.5 and 5.0,temperature between 75 ℃ and 85 ℃,reaction time for 10 min and air agitation.The uniform and compact nickel layer deposited on carbon fibers was proved by XRD and SEM,and the electrical resistivity of carbon fibers with nickel coating was tested.Results indicate that the electrical resistivity of carbon fibers with electroless nickel plating is decreased by an order of magnitude compared with that of carbon fibers.It means that nickel coating can greatly improve the electromagnetic interference shielding properties of carbon fibers.     

1-乙基-3-甲基咪唑四氟硼酸盐离子液体结构性质的模拟计算

离子液体以其独特的性质广受关注,被称为"绿色设计者溶剂",人们对其潜在的应用价值做了大量的研究.实验采用HyperChem软件构建了1-乙基-3-甲基咪唑四氟硼酸盐([EMIM][BF4])离子液体分子结构的3D模型,并用PM3法进行预优化,然后应用Gaussian 03w程序分别在RHF/6.31G(d)和BLYP/6-31G(d)计算水平上进行量子化学计算,并经振动频率和强度分析得到理论红外谱图.结果表明,[EMIM][BF4]离子液体的阴阳离子存在着氢键等弱相互作用.     

无机纳米-聚酰亚胺复合薄膜介电性研究

测试了纳米Al2O3-聚酰亚胺(PI)复合薄膜和纳米SiO2-聚酰亚胺复合薄膜的介电常数、介质损耗角正切和电导电流特性.结果表明,随着无机物含量的增加,两种复合薄膜的相对介电常数和介质损耗角正切增大,电老化阈值减小;无机物含量相同时,Al2O3-聚酰亚胺复合薄膜的相对介电常数和介质损耗角正切比SiO2-聚酰亚胺复合薄膜大,电导电流大,电老化阈值小.     

含氮、磷有机配体对(CdSe)_2量子点结构和电子性质的影响

使用密度泛函理论方法研究了量子点(CdSe)2与配体L(L=PH3、PH2Me、PHMe2、PMe3、NH3、NH2Me、NHMe2、NMe3)之间的相互作用及其产物的结构和性质。配体中的P或N原子与Cd原子上分别形成较强的Cd—P和Cd—N配位键,从而影响(CdSe)2的结构和电子性质。配体作用下,(CdSe)2的几何结构、电荷分布、轨道能级、吸收光谱等均发生变化,但2类配体的影响,尤其是甲基数目的影响,存在较大差异。