碳质金矿中碳质物及其“劫金”机理研究进展

碳质金矿是重要的难处理金矿资源之一,碳质物“劫金”是金浸出率低下的主要原因。碳质物组分复杂,不同组分的碳质物的“劫金”能力和“劫金”行为存在差异,磨矿和浸出环节对碳质物的“劫金”能力也会产生影响,这些因素均能直接影响金的浸出率。通过系统总结碳质金矿中碳质物在组成特征、“劫金”机理及“劫金”能力的影响因素等方面的研究进展,对碳质物“劫金”机理现有研究工作的不足及未来研究方向进行了探讨,为碳质金矿碳质物劫金机理及预处理工艺的研究提供了重要参考。     

金品纯度的比重法测定

介绍了金品纯度的测定方法,推导出了比较实用的纯度计算、杂质估算和温度影响等几个表达式。     

Structural analysis of Au/Mg(OH)2 during deactivation by Debye function analysis

Using a Debye function analysis, the presence of icosahedral and face centered cuboctahedral gold in a 1 1 ratio has been found in freshly prepared Au/Mg(OH)₂ catalyst. The results support earlier studies which suggest the icosahedral form to be more stable at small nanometer sizes. Interactions between the gold and the Mg(OH)₂ support appear to be weak, with the gold rapidly coagulating over a period of three months. Re-analysis of the aged sample shows the gold to be mainly in the form of truncated decahedra.     

Impregnation of X Zeolite with Alkaline Hydroxide During the Synthesis

Enhancement of the basic properties of the X zeolite with FAU framework has been carried out during synthesis, without further treatment such as ion-exchange or impregnation. Control of the washing stage enables retention of the optimum amount of alkaline hydroxides, which increases the basic catalytic activity of X zeolite in the alkylation of toluene. This alkaline hydroxides neither affect the FAU framework nor the silicon/aluminium molar ratio of the X zeolite. The optimum (Na + K)/Al molar ratio of the improved catalyst was 1.06 corresponding to a washing volume of 200 mL. This X zeolite presented better catalytic activity than a cesium-zeolite prepared by ion-exchange. The presence of hydroxysodalite impurity in the X zeolite increased the amount of impregnated alkaline hydroxides but not the catalytic activity. The present study shows that it is possible to increase the basic properties of the X zeolite directly in the synthesis process.     

二合一石墨合成炉的应用

对石墨合成炉运行中出现的故障进行分析和探讨，并提出一些建议和改进措施，以实现石墨合成炉的稳定运行。     

Supercritical CO2 impregnation of Radiata pine with organic fungicides: Effect of operating conditions and two-parameters modeling

Supercritical impregnation of Radiata pine with ethyl acetate and decanal using CO₂ as carrier solvent has been studied at pilot plant scale. Radiata pine is one of the most common wood species that is originally from Australia and is widely grown in Spain and Portugal and ethyl acetate and decanal were selected as organic compounds.Some experiences were carried out to obtain the optimal operating conditions for the supercritical impregnation process. Experiments were conducted at pressures of 7–15 MPa, temperatures of 35–50 °C and solvent flow rate between 1.5 and 3.5 kg/h. The results of this study have indicated that the treatment gives much better preservative penetration and retention operating with low pressures (7.5 MPa), low temperatures (close to 35 °C) and moderate CO₂ flow rate (3.5 kg/h) in the selected operating range. Moreover, a simple mathematical model of two adjustable parameters (external mass transfer coefficient and partition coefficient) has demonstrated to fit the experimental impregnation curves with reasonable accuracy (average absolute deviation, 3–10%).     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。     

Effects of gold plating on the resistance to high temperature discoloration of the cavity for ceramic packages

The effects of thickness and types of gold plating on the resistance to high temperature discoloration of gold plating on cavity surface of ceramic package were investigated. It was found that the thicker gold plating, the less discoloration degree for ceramic packages. Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide gold plating. The relationship between the gold plating thickness and the amount of diffused Ni to the gold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃for 15 min was also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Co plating systems, respectively, no discoloration was observed on the gold plating surface of cavity, and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Co to the gold plating is 0.04%.     

Manufacturing processes of Atlantic Bronze Age annular gold ornaments—A case study of the Guînes gold hard (Pas-de-Calais,France)

ABSTRACT

The gold work from the Western European Middle and Late Bronze Age (about 1500–700 BC) is characterized by solid ornaments and vessels. This article deals with manufacturing techniques of heavy gold jewelry by presenting a gold hoard found at Guînes, Pas-de-Calais, in Northern France, as a case study. In particular, three ornament types will be taken into consideration: (1) solid penannular neck and arm-rings, plain or with linear or geometric decoration; (2) flange-twisted ornaments that appear in different dimensions, as small as ear rings, as neck rings, up to the large size of a belt; (3) complex, composite ornaments. The technological aspects dealt with in this precious metal working context are manifold, including ingot and lost wax casting, hammering and bending of solid rods, the production of flange-twisted rods, chasing as decoration method, and finally joining techniques such as soldering, riveting and folding, and creasing.     

Graphene-Au nanoparticle based electrochemical immunosensor for fish pathogen Aphanomyces invadans detection

Epizootic ulcerative syndrome (EUS) that is primarily caused by an invasive oomycete fungus Aphanomyces invadans is a devastating fish disease. Rapid diagnosis of EUS is significantly important for the control and treatment of this highly invasive disease. In our study, a label-free immunosensor constructed with G-AuNPs/SAM-Ab-BSA/GCE was proposed for the determination of Aphanomyces invadans. The electrode was prepared by the immobilization of anti-mycelium antibodies on graphene-AuNPs nanocomposite-cysteamine monolayers modified GCE. The optimized parameters were as follows: 90 min as the immersion time of SAM modified electrode in the anti-mycelium solution, 0.20 µg/mL as the concentration of anti-mycelium solution and 10 min as the interaction time of immunoreaction. The immunosensors exhibited low limit detection of 309 ng/mL and good reproducibility.