均匀超细Fe3O4磁流体的研究

实验研究了均匀超细Fe3O4磁流体的制备工艺，对所制得的系列磁流体进行了性能检测和结构表征。所得磁流体具有良好的稳定性和磁性能，根据电子衍射图计算了粒子的晶格常数，证明磁流体中的物质组成为Fe3O4，透射电镜(TEM)表明Fe3O4粒子细小而均匀，一般为6～8nm，具有良好的可重复性，为工业放大和产业化应用奠定了基础。     

A NEW SIMULATION APPROACH TO THE ENTROPY-RELATED PROPERTIES OF FLUIDS——CHEMICAL POTENTIAL AND HELMHOLTZ FREE ENERGY OF HARD SPHERE FLUIDS

A new approach to the computation of entropy-related properties of fluids has been pre-sented.Application of the new technique to hard sphere fluids shows that it is capable of providingreliable estimates of such properties as the chemical potential and Helmholtz free energy,even athigh density where other existing methods are hardly applicable.The chemical potential of an infinitedilute component in hard sphere systems has been estimated,and compared with that calculated fromthe Carnahan-Starling equation.     

数控超声磨削陶瓷叶片型面刀位轨迹计算

介绍了陶瓷超声磨削加工现状,建立了平行直纹面数学模型.分析了用圆柱磨轮四轴数控超声磨削平行直纹面时原理误差,并提出减小误差的措施,计算出磨轮空间轨迹,并进行陶瓷叶片型面超声磨削加工工艺试验.试验结果表明,超声磨削加工陶瓷叶片型面是可行的,所完成的刀位计算可有效减小原理误差.     

抽油杆多功能保护器的研制

油田进入高含水开发后期,低沉没度井数不断增加,油田地质条件日趋恶劣,油套管柱扭曲变形,抽油井的杆管工况恶化,杆管偏磨问题日益突出。鉴于此,研制开发了DCB-22型抽油杆多功能保护器。该工具具有中途吸震、自磨、自动旋转、自动偏移的功能,较好地解决了杆管偏磨、抽油杆柱震荡和脱扣等问题,在杆管偏磨防治技术方面取得了较大的进展和较好的经济效益。     

Mathematical models of grinding manufacture and tooth contact analysis of spherical gears

The spherical gear is a gear-driven mechanism with two degrees of freedom (DOF), which can transfer spatial motion and power. Grinding machining of the spherical gear is performed with a plate grinding wheel by using generating method, and based on mathematical model of the plate grinding wheel, the mathematical model of the spherical gear is set up. And then, the meshing model of a spherical gear pair is developed and the tooth contact analysis (TCA) of the spherical gear pairs is performed. After that, th...     

The Effects of Power Law Fluid Rheology on Coil Heat Transfer for Agitated Vessel in the Transitional Flow Regime

A CFD model of heat transfer from power‐law fluids to helical cooling coils in the transitional flow regime of a baffled tank mixed with a pitched blade turbine was developed with Fluent^TM. The model captured local temperature and velocity gradients. Simulations were run, varying Re, Pr, K and n. The results indicate that a Sieder‐Tate type correlation, with the exponent on and the coefficient in front of the Reynolds number being a function of n, is recommended for estimating ho. Also, a new two coil bank design was found to be more efficient when 450 < Re < 650.     

Experimental and Numerical Analysis of the Viscous Fingering Instability of Shear‐Thinning Fluids

Miscible flow displacements in a rectilinear Hele‐Shaw cell of Newtonian as well as rheologically well‐characterized shear‐thinning fluids are examined through experimental measurements and numerical modelling. Water is used as a displacing fluid while the displaced fluid consists of either a reference Newtonian glycerol solution or shear‐thinning solutions of Alcoflood? polymers of different molecular weights. The experimental measurements revealed that the shear‐thinning behaviour of the non‐Newtonian solutions resulted in more complex instability patterns and new finger structures not previously observed in the case of Newtonian displacements are identified and characterized. An analysis of the effects of the rheological behaviour of the shear‐thinning fluids on instability characteristics such as the finger width and finger tip velocity is presented. Numerical simulations using a pseudo‐spectral method are conducted and allowed to compare the predictions of the mathematical model based on an effective Darcy's law with the experimental measurements.     

金刚石刀具刃口研抛辅助机构方案设计

随着精密和超精密切削加工技术的发展,对金刚石刀具质量提出了更高的要求,由此对高性能金刚石刀具刃口研抛辅助机构的需求也越来越迫切。为此,在简要分析金刚石刀具刃口圆弧轮廓精度指标对加工精度影响的基础上,结合研抛工艺给出了金刚石刀具刃口研抛辅助机构的要求,并对金刚石刀具刃口研抛辅助机构的总体方案及其微进给机构和微摆幅机构进行了设计。     

聚羧酸助磨剂合成及其性能

利用水泥粉磨过程中的机械力促使水解聚马来酸酐（HPMA）与聚乙二醇单甲醚（MPEG）进行酯化反应形成聚羧酸助磨剂。试验研究了HPMA、MPEG、HPMA与MPEG的混合物、HPMA与MPEG的反应合成物对水泥助磨效果以及对砂浆性能的影响。结果表明,HPMA与MPEG都有一定的助磨性,HPMA与MPEG的混合物和反应合成物具有更佳的助磨性能,且可以改善水泥砂浆的流动性能和显著提高水泥砂浆的早期强度。激光拉曼光谱测试表明HPMA与MPEG的混合物和反应合成物与水泥共同粉磨后吸附在水泥颗粒表面,具有相似的拉曼位移图谱。     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.