模拟集成温度传感器设计

介绍了一种模拟集成温度传感器的电路设计。该电路利用双极性晶体管基极-发射极结压降与热力学温度T成比例的关系来实现温度的测量,并在6μm双极工艺线上投片成功。该电路在常温25℃下输出298.2μA的电流,在-55℃～150℃的工作温度范围内的误差不超过±3℃,非线性度误差不超过±0.4℃。     

一种基于多项式的代理保护代理签名体制研究

文章首先分析了张青坡等人中提出的多项式形式的E1Gamal签名体制的安全缺陷,然后基于有限域上多项式的性质,提出了有限域上多项式形式代理保护代理签名方案;新的签名方案中,利用多项式进行签名权利的委托,并由改进的有限域上的多项式形式的E1Gamal签名体制生成代理签名。新方案的安全性基于离散对数的难解性。     

矿用区域温度监测系统研制

针对现有的火灾探测器仅能对已发生的火灾进行探测,而在火灾发生前、环境温度较低时,却无法发出报警信号的问题,设计了一种可应用于非煤矿山的基于测温电缆的区域温度监测系统。该系统采用线状温度传感器连续监测探测区域的最高温度,在火灾未发生时即可发出预警信号,从而避免事故发生或引起火灾。试验结果验证了该系统的可行性。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

基于tinyAVR和Nokia3310 LCD的温度绘图仪

采用14引脚封装的tinyAVR单片机、广泛应用于手机中的液晶显示模块Nokia3310LCD和深受欢迎的单总线3引脚数字温度传感器DS18B20,构建了一款具备实用性和趣味性的,既可读数、又可读图的双模式温度绘图仪。     

石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society