15%田草灵高效液相色谱分析

采用Ｎｏｖａ－Ｐａｋ Ｃ１８不锈钢色谱柱进行反相液相色谱分析，以甲醇：水＝６５：３５（Ｖ／Ｖ）为注动相，以邻苯二甲醇二乙酯为内标物，用内标法测定田草灵除草剂中苄嘧黄隆和异丙甲草胺的含量，结果表明，各有效成分与内标物色谱峰分离完全，杂质无干扰，测定结果，苄嘧黄隆和异丙甲草胺的变异系数分别为０．７４％和１．０７％，回收率分别为９９．４％￣１００．８％和９９．１％￣１０１．３％。     

橡胶对HIPS树脂落锤指标的影响

通过对高抗冲聚苯乙烯树脂出现产品落锤指标偏低问题的分析，从橡胶配量及其粒径大小上进行了改进，同时改进了工艺操作，采取了提高反应釜搅拌速度、降低乙苯浓度等措施。结果产品合格率达到９９％以上，优级品率达到９８％以上。     

电子陶瓷和器件的低温共烧技术

较系统地介绍了电子器件用低温共烧陶瓷(low temperature cofired ceramics,LTCCs)材料,探讨了其工艺中的若干问题。电子器件用低温共烧陶瓷材料包括:玻璃/陶瓷复合材料、结晶化玻璃、晶化玻璃/陶瓷复合材料以及液相烧结陶瓷,其中典型的和最为常用的LTCCs为玻璃/陶瓷(特别是氧化铝)复合材料。正在研究的一些陶瓷介质材料中,Bi基介质材料引起了人们的关注。玻璃/陶瓷复合材料的制备工艺中,应当着重关注和加深了解玻璃的流动性和结晶性、玻璃的起泡、玻璃和陶瓷颗粒间的反应、共烧材料的匹配等问题,从优选材料配方和优化工艺着手,从而获得优质可靠的材质和器件。     

The adhesion of amorphous polystyrene surfaces below Tg

The bonding of polystyrene (PS) surfaces below T_g was investigated by two different fracture tests: the lap-shear joint method and the cantilever beam method. Adhesion energy values obtained by the two methods are in agreement and develop with (time)^1/2, at temperatures as low as T_g−16 °C. Even if the double cantilever method is the most common test found in the literature for adhesions above T_g, for low adhesion values, below T_g, the lap-shear joint geometry is more appropriate. Moreover, when the glass transition temperature is used as a reference temperature, polydisperse and monodisperse PS adhesion energy curves are superposable, suggesting that the auto-adhesion is not significantly favored by the presence of numerous chain ends at the surface (due to the low molecular weight chains provided by the polydisperse PS).     

Comments on the characterisation of oxidation catalysts using TPR/TPO

Temperature programmed reduction (TPR) and oxidation (TPO) are used extensively in catalyst characterisation. In this paper, we examine the use of TPR/TPO cycles for the characterisation of a range of molybdates and single oxides. In particular we observe that the first cycle differs from that of subsequent analyses, even when the maximum temperature is limited to that used in the catalytic reaction. The effect is independent of heating rates and cooling atmospheres and has been demonstrated using different bed configurations. This observation has significance when these oxides are used in periodic flow reactors that involve many cyclical reduction/oxidation.     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

7.63m特大型焦炉砌筑施工技术及要点

主要针对7.63m特大型焦炉砌筑施工技术,从工程实践效果分析其施工技术在质量、工期、成本等方面收到良好的经济效益和社会效益,现对7.63m特大型焦炉施工技术作简要介绍。     

筏板基础在自贡地区高层建筑设计中的应用研究

文章结合工程设计经验对自贡地区的高层建筑在选用天然筏板基础的设计过程中,对高层建筑基础设计中涉及到的重要的地基沉降计算、结构设计和地下水等有关问题的处理进行了具体分析,对在一般高层建筑中采用天然筏板基础的实用性和可行性从设计和施工两个方面进行了相关的工程探讨。