美国热煤气脱硫吸附剂的发展现状

概述了美国几种较成熟的热煤气脱硫吸附剂的配方、制备技术及吸附剂在若干试验条件下强度、活性、寿命等宏观特性的测试结果。     

GCr15控制轧制新工艺的模拟研究

用热扭转试验机，实现了热变形模拟轴承钢控制轧制工艺。研究了形变过程中所发生的静态和动态软化过程，观察了形变后的组织，证实在生产过程中实现的可能性，为在生产中推广使用提供了科学依据。     

莱钢焦化厂精苯生产加热改造方案

莱钢焦化厂以导热油代替蒸汽用于精苯生产及导热油炉工艺，经合理设定各项操作参数，提高了精苯加工能力，解决了蒸汽压力不足影响精苯生产的难题．     

对梁,底组合步进式加热炉半热滑轨的改进实践

介绍了间断式半热滑轨的研制和应用过程，以及经过节能技术改造，用新型半热滑轨代替老式滑轨的使用。实践表明，不但解决了以往的水梁漏水的问题，而且使线Ｃ级品率提高了３．３９％，每年可增产３５００ｔ线材，吨钢热涌单耗降低０．１４ＧＪ，年创经济效益２３９万元。     

热连轧过程自动化控制系统的应用

介绍日照钢铁1580mm热轧带钢过程控制系统的应用,以及系统配置、网络结构、中间件和应用软件功能。     

Terahertz detectors based on superconducting hot electron bolometers

Low noise terahertz(THz)heterodyne detectors based on superconducting niobium nitride(NbN) hot electron bolometers(HEBs)have been studied.The HEB consists of a planar antenna and an NbN bridge connecting across the antenna’s inner terminals on a high-resistivity Si substrate.The double sideband noise temperatures at 4.2 K without corrections have been characterized from 0.65 to 3.1 THz.The excess quantum noise factor β of about 4 has been obtained,which agrees well with the calculated value.Allan variance of the HEB has been measured,and Allan time up to 20 s is obtained using a microwave feedback method.Also,the intermediate frequency gain bandwidth(GBW)was measured using two dierent methods,resulting in same GBW value of about 3.5 GHz.     

热轧锭杆“黑心”问题的探讨

锭杆是纺机中一种数量大、转速高、尖端要求耐磨的杆状零件。用热轧方法生产的锭杆毛坯,在其纵、横截面上经酸蚀后出现了“黑心”问题。本文通过一系列试验和观察证实“黑心”并非疏松,“黑心”的存在也不影响耐磨性。从而否定了由于“黑心”是疏松而需将现行热轧方法改用车削方法生产锭杆毛坯的论点。本章对“黑心”形成的原因作了分析和探讨,认为“黑心”是由于斜轧时各部分变形不均匀,而使不同区域里纤维状组织的纤维变形形式不同所致。     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

热卷箱是提高热连轧线竞争能力的最佳选择

介绍了热卷箱技术的发展及在我国的应用情况。结合“双工位无芯卷取”热卷箱技术在宝钢集团梅山钢铁公司1422mm热轧厂的成功应用，重点介绍了该技术的特点及在解决热轧板带中节能减排、减少氧化铁皮、避免甩尾、稳定精轧轧制及开发高附加值产品等方面的优势；认为其是提高热轧板厂竞争力的最佳选择。     

Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickel

The effects of SO₂ and SO₃ in the environment on the hot corrosion behavior of Ni in the temperature range 750–950°C has been studied. Below the melting point of Na₂SO₄ (884°C), rapid corrosion takes place by formation of a Na₂SO₄-NiSO₄ melt, which can penetrate the porous oxide scale and give rise to sulfide information by coming in contact with the metal. The distribution of the sulfides depends on the SO₂ level in the ambient gas. Continued corrosion occurs by a sulfidation-oxidation mechanism. At temperatures above the melting point of Na₂SO₄, accelerated degradation occurs via dissolution of the surface scale, followed by reprecipitation of the oxide in a nonprotective form.Deceased