透平空压机新型冷却器的使用简介

ＤＡ３５０－６１空压机原采用铝板式油冷却器。由于铝材易受腐蚀，寿命短，改用新型不锈钢式冷却器后效果良好，性能稳定，保证了空压机的安全运行。     

CS3000顺控表的组态和应用

介绍CS3000系统顺控表的结构、参数定义和功能块组态,以聚丙烯加氢控制为例,描述顺控表的组态方法、顺控动作和操作步骤等。     

水轮发电机组推力轴承油槽内流动及传热特性研究

为解决推力轴承瓦温过高的问题,采用数值模拟方法分析了某水轮发电机组推力轴承内循环冷却系统油槽内润滑油的流动及传热特性。结果表明,靠近镜板处油流速度大,远离镜板位置油流速度小;镜板内缘压力最低,沿着推力轴瓦径向向外压力逐渐增大;初始瓦温、初始油温一定时,随着水温降低,整体油温下降幅度并不大。根据研究结果,对推力轴承内循环冷却系统提出适当增大冷却器U型管直线段的长度、增大冷却器管径、提高冷却水的压力和流量、加大油冷却器铜管间距的改进建议。     

Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

铸态及快淬态无钴AB5型贮氢合金的循环稳定性

对AB5型LaxMm1-x(NiMnSiAlFe)49(x=0,0.45,0.75,1.00,摩尔分数)贮氢合金进行了快淬处理,研究了La含量及快淬工艺对合金微观结构及电化学循环稳定性的影响.结果表明:La含量的增加对铸态合金的循环稳定性没有明显影响,但使快淬态合金的循环稳定性下降,且快淬处理能显著提高合金的循环稳定性.当La替代量从0增加到1.00时,经300次充放循环后,铸态合金的容量保持率(Rh)从59.2%增加到59.8%;16 m/s淬速快淬态合金的容量保持率从83.9%下降到65.0%.对于x=0.45的合金,当淬速从0(铸态被定义为淬速等于0)增加到28 m/s时,容量保持率从59.8%增加到75.8%.     

二元稀土系AB5型贮氢电极合金的放电容量与晶胞体积和4f电子浓度的关系

制备了6个系列通式为AαA‘1-αB5的RE(NiCoMnTi)5贮氢电极合金(其中，AαA‘1-α为La，Ce，Pr，Nd4个元素中任意2个的组合)，测定了它们在100次循环中的最大放电容量Cmax及部分合金的晶胞体积Vcell．结果表明：Cmax主要由Vcell决定，Cmax先随Vcell的增大而增加，在Vcell≈85．66x10^-^3。nm^3时达到一极大值，然后又随Vcell的增大而减小；同时，Cmax还与4f电子浓度ne4f／naRE有关，A侧具有相同4f电子浓度的合金其Cmax随4f电子浓度的变化趋势相似．     

电沉积镧镍合金薄膜的电化学贮氢性能研究

利用在水溶液中电沉积的方法制备了LaNi5贮氢合金薄膜。采用XRD方法研究了贮氢合金薄膜在充放电前后相结构的变化，运用扫描电镜观察了合金薄膜的表面形态，通过电化学测试（循环伏安、恒电流充放电）研究其电化学贮氢性能。结果表明，该合金薄膜具有较好的电化学贮氢性能，电化学活性较高，无需活化过程，最高电化学容量可达156mAh／g。     

计及互联调控的新能源汽车一体化供能站规划

为了解决插电式电动汽车、换电型电动汽车和氢燃料电池汽车大规模接入背景下的综合能源站规划问题,首先提出一种包含三种主流新能源汽车供能设备的一体化供能站概念模型;其次,提出氢能转运、换电电池转运、服务费调控三种互联调控模型,以增强各站间的联系;然后,以全周期综合费用为优化目标,提出计及互联调控的新能源汽车一体化供能站规划模型;最后,基于IEEE 33节点配电网和某市部分城区交通网的联合系统进行仿真验证。结果表明所提模型优化了设备配置,改善了系统运行状态,延缓了配电网的升级改造。     

Hyperhomocysteinemia and Cardiovascular Disease: Is the Adenosinergic System the Missing Link?

The influence of hyperhomocysteinemia (HHCy) on cardiovascular disease (CVD) remains unclear. HHCy is associated with inflammation and atherosclerosis, and it is an independent risk factor for CVD, stroke and myocardial infarction. However, homocysteine (HCy)-lowering therapy does not affect the inflammatory state of CVD patients, and it has little influence on cardiovascular risk. The HCy degradation product hydrogen sulfide (H₂S) is a cardioprotector. Previous research proposed a positive role of H₂S in the cardiovascular system, and we discuss some recent data suggesting that HHCy worsens CVD by increasing the production of H₂S, which decreases the expression of adenosine A_2A receptors on the surface of immune and cardiovascular cells to cause inflammation and ischemia, respectively.     

纳米Cr颗粒对Ni-Mo复合镀层性能的影响

为了研究纳米Cr颗粒对Ni-Mo复合镀层性能的影响,采用脉冲电沉积方法制备具有不同Cr含量的Ni-Mo复合镀层.利用扫描电子显微镜和X射线衍射仪分别观察和分析复合镀层的组织形貌及结构.采用电化学测试和X射线光电子能谱研究复合镀层的析氢性能和耐蚀性能.结果表明:随着镀液中纳米Cr颗粒含量的增加,镀层晶粒得到细化,析氢过电位增大,复合镀层析氢性能得到提高;当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层表面钝化膜中MoO₃含量较高,且可与Cr产生协同效应,因而复合镀层具有较好的耐蚀性能;但随着镀液中纳米Cr颗粒含量的进一步增加,复合镀层中沉积的Cr元素含量降低,复合镀层的析氢性能和耐蚀性能均降低.因此,当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层具有较好的析氢性能和耐蚀性能.