320×240 Pixels CMOS Digital Image Sensor with Wide Dynamic Range

A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.     

一种基于TV模型的自适应图像修复方法

图像修复是数字图像处理的重要内容，可用于被损坏的图像和视频修复、视频文字去除以及视频错误隐藏等。基于TV模型的修复方法有较好的恢复效果，但对参数的选取比较敏感，且运算量较大。本文提出了一种基于TV模型的自适应图像修复方法，与原方法相比可以有效提高该算法的稳健性，并能显著的减少运算时间。     

Linear predictive transform of monochrome images

Digital monochromatic images are encoded using a novel minimum mean square error (MSE) linear predictive transform (LPT) coding formulation. The new formulation is appealing for two important reasons. First, it leads to simple coder implementation with a satisfactory signal-to-noise ratio (SNR). Second, it provides a general theoretical framework from which minimum MSE predictive coding and minimum MSE transform coding arise as special cases. Some specific results of this paper that illustrate the previous ideas are: a simple and generally suboptimum two-dimensional LPT coder operating at 2 bit pixer⁻¹ has approximately one third the complexity of a 4 × 4 Hadamard coder while yielding a better SNR; an optimum 2D LPT coder operating at 2 bit pixer⁻¹ has approximately one sixth the complexity of a 4 × 4 Karhunen-Loeve transform (KLT) coder while yielding a better SNR.     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

HIS变换用于数字化航空片影象同多光谱影象的复合

本文探讨ＨＩＳ变换对数字化航空片影象与ｌａｎｄｓａｔ ＴＭ多光谱影象进行复合的方法，并在此基础上提出一种改进的方法。试验结果表明本文提出的方法是一种非常行之有效的方法。复合后的影象不仅保留了ＴＭ影像的光谱特征，而且将其空间分解力由３０ｍ提高到１０ｍ，清晰度也提高了。因而复合后的影像能提高分类精度，制作专题图的精度、多时相监测能力和解译水平等。     

多传感器目标识别的图像数据融合技术研究

军事和空间技术的要求促进了微光技术的发展。微光图像实时处理技术是夜技术今后发展的重要方向，本文针对微光图像与脉冲激光测距仪的数据信息实时融合与显示的方法及其实现进行了研究。给出了系统框图及工作原理，为实现探测识别、跟踪的实时性、智能化和微型化，从而为研制新一代战术侦察与火控系统提供了具体有效的技术基础。     

透视图象的三维实体几何复原

对于未知透视参数的图象，如何获得较精确的原实体三维几何构形，本文推导了几个线段逆变换关系式，给出一个有效的方法，实现复杂组合体透视图象的三维重建，文中给出几个实例。     

溶液扩散系数自动测量系统

结合实时法全息干涉计量和数字图象处理技术，提出了一种溶液扩散系数的自动测量系统。在干涉图的处理中，采用了相位检测和曲线拟合技术，得到了亚象素的测量精度。     

Testing of multi-output circuits by means of signature analyzer

Let a circuit havem outputs,m>1. There are two ways to test this circuit by means of a signature analyzer: use a single input analyzer for each output or use anm-input analyzer to test all outputs simultaneously. The main goal of this letter is to demonstrate that for fault output sequences with small multiplicity of errors and long length the second approach is more effective.