Polymerization of ionic monomers in polar solvents: kinetics and mechanism of the free radical copolymerization of acrylamide/acrylic acid

A precise data set describing the kinetics of the free radical copolymerization of acrylamide/acrylic acid (AM/AA) in the range of low total monomer concentration as a function of the pH, total monomer concentration, initiator concentration, and comonomer ratio is presented. Strong impact on the reactivity ratios has been identified for the pH and total monomer concentration. Specifically, at constant total monomer concentration of 0.4 mol/l and T=313 K the reactivity ratio of AM increases from 0.54 at pH 1.8 to 3.04 at pH 12. Contrarily, the reactivity ratio of AA decreases from 1.48 to 0.32. The crossover occurs at pH≈4.2. Electrostatic effects due to the variation of the degree of ionization of AA are primarily suggested to influence the kinetics. When the total monomer concentration increases from 0.2 to 0.6 mol/l at constant pH=12, the reactivity ratios of AM and AA decrease from 4.01 to 2.13 and increase from 0.25 to 0.47, respectively. Reduction of electrostatic repulsion between the ionized monomer AA and partially charged growing polymer chain ends due to higher ionic strength at higher total monomer concentration serves as explanation of the effect. The precise data set is the prerequisite for a novel approach to calculate copolymer compositions in case of variable monomer reactivity.     

钻杆接头螺纹退刀尺寸对接头寿命的影响

钻杆接头螺纹退刀尺寸是指外螺纹接头的台肩面到螺纹消失前第一个完整螺纹之间的距离。GB9253．1－88规定退刀尺寸应小于或等于12．7mm内螺纹，钻杆接头内螺纹的锤孔尺寸为16±2mm，以保证内、外螺纹啮合良好。经检测发现，从日本NKK公司进口的所有φ127mm钻杆接头外螺纹退刀尺寸都大于12．7mm，镗孔尺寸为16～18mm。而APISpec7K规定钻杆接头内螺纹最小镗孔尺寸为15．9mm。鉴于此，建议对我国的有关标准作相应修改，与API标准保持一致。     

3,4-二甲氧基苯乙腈合成研究

介绍了 3,4 二甲氧基苯乙腈的合成方法 ,探讨了各种因素对反应收率的影响 ,产品总收率和质量分数分别大于 65 .0 %和 98%。     

边坡稳定影响因素及稳定分析方法探讨

在明确边坡稳定性取决于边坡自身的结构特性、水、振动、人类活动、气候条件、风化及植被等内外因素综合作用的前提下,对边坡的稳定分析方法从定性到定量的发展过程进行了分析。定性分析法主要有地质历史力学分析法、工程经验类比法和图解法等;定量分析法主要有极限平衡法、有限单元法、能量平衡法、控制理论分析法、智能技术分析法以及综合分析法等。针对现有边坡稳定分析方法存在的利弊,提出了需要深入研究的问题,以完善边坡稳定性的研究内容。     

Development of Low-Oxide MCrAlY Coatings for Gas Turbine Applications

Advanced high-energy plasma systems are being used to achieve the benefits of the high-velocity oxy-fuel (HVOF) system without losing the inherent advantages of plasma for coating of gas turbine parts. MCrAlY coatings play a very important role in the performance and reliability of gas turbine components. One of the important considerations for next generation of gas turbines, which have more demanding conditions and need to withstand ever increasing operating temperatures, is that they should possess very low oxygen content levels in the coating. Low oxygen content coatings are applied by the expensive low-pressure plasma spray (LPPS)/vacuum plasma spray (VPS) technique for critical components in aero- and land-based gas turbines. This work deals with the development of low-cost LPPS equivalent coatings (having low oxygen content) using the high-energy high-velocity plasma spray (HEHVPS) gun and inert gas shroud. A comparison has also been made with CoNiCrAlY coatings by HVOF.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

陕西南部路基病害分布特征及主要控制因素探讨

在统计分析的基础上,归纳总结了陕西南部各类路基病害的分布特征,并从自然因素和人为因素两个方面分析了各类路基病害发生的主要控制因素。     

Survivability of systems under multiple factor impact

The paper considers vulnerable multi-state series-parallel systems operating under influence of external impacts. Both the external impacts and internal failures affect system survivability, which is determined as the probability of meeting a given demand. The external impacts are characterized by several destructive factors affecting the system or its parts simultaneously.In order to increase the system's survivability a multilevel protection against the destructive factors can be applied to its subsystems. In such systems, the protected subsystems can be destroyed only if all of the levels of their protection are destroyed.The paper presents an algorithm for evaluating the survivability of series-parallel systems with arbitrary configuration of multilevel protection against multiple destructive factor impacts. The algorithm is based on a composition of Boolean and the Universal Generating Function techniques.Illustrative examples are presented.     

稳定同位素井间示踪技术在深层块状稠油油藏水驱特征研究的应用

经对冷43块深层块状普通稠油水驱注水5个试验井组开展的稳定同位素示踪测试，利用中子活化技术分析样品，采用先进的示踪剂定量分析与流动模拟相互结合的方法，以示踪数值模拟为手段，评价了油井连通、油层平面及纵向上的非均质性、隔层的封隔性等因素对水驱控制程度及动用状况的影响，通过优化注水推进方向及速度，强化动态调整措施，提高了稳产基础。     

Alternatives to standard hemodialysis

Survival of patients on hemodialysis remains poor, but the benefits of increasing urea clearance have probably been maximized within our current treatment schedules. Long dialysis sessions (8 hr) produce impressive outcomes, with mortality 53% to 55% lower than conventional schedules. Even increasing from 4 to 5 hr may improve survival. Increased frequency of dialysis (6 times weekly) produces impressive reductions in left ventricular mass and could conceivably be implemented in‐center. Preliminary data suggest a 61% reduction in mortality with increased frequency. Nightly dialysis combines longer sessions with increased frequency and has produced remarkable clinical gains in blood pressure, left ventricular mass, serum phosphate, and sleep apnea. However, the data are mainly from case series and impact on mortality remains unknown. Expansion of home hemodialysis would be necessary for this modality to grow. Convective therapies remove middle molecules more effectively, and observational data suggest hemodiafiltration has the potential to improve mortality by 35% to 36%. Hemodiafiltration has the advantage of being relatively easy to implement. The uremic milieu is complex and further investigation of the underlying pathophysiology is needed to inform future dialysis interventions. The survival data above are from observational studies, and hence benefits are likely to be exaggerated. Randomized trials of dialysis interventions are desperately needed. They remain difficult to perform, because of the complexity of both the patient population and the interventions, and because of limited available funding.