抽油杆多功能保护器的研制

油田进入高含水开发后期,低沉没度井数不断增加,油田地质条件日趋恶劣,油套管柱扭曲变形,抽油井的杆管工况恶化,杆管偏磨问题日益突出。鉴于此,研制开发了DCB-22型抽油杆多功能保护器。该工具具有中途吸震、自磨、自动旋转、自动偏移的功能,较好地解决了杆管偏磨、抽油杆柱震荡和脱扣等问题,在杆管偏磨防治技术方面取得了较大的进展和较好的经济效益。     

Mathematical models of grinding manufacture and tooth contact analysis of spherical gears

The spherical gear is a gear-driven mechanism with two degrees of freedom (DOF), which can transfer spatial motion and power. Grinding machining of the spherical gear is performed with a plate grinding wheel by using generating method, and based on mathematical model of the plate grinding wheel, the mathematical model of the spherical gear is set up. And then, the meshing model of a spherical gear pair is developed and the tooth contact analysis (TCA) of the spherical gear pairs is performed. After that, th...     

我国回转窑水泥不同粉磨工艺颗粒形貌剖析

利用电子显微镜及专用的计算机软件等方法，对我国目前大中型水泥企业不同粉磨工艺下水泥颗粒形貌状况进行了研究分析。研究结果表明，我国不同粉磨工艺下水泥颗粒形貌存在较大差别，提高磨机研磨功能有利于改善水泥颗粒形貌。     

金刚石刀具刃口研抛辅助机构方案设计

随着精密和超精密切削加工技术的发展,对金刚石刀具质量提出了更高的要求,由此对高性能金刚石刀具刃口研抛辅助机构的需求也越来越迫切。为此,在简要分析金刚石刀具刃口圆弧轮廓精度指标对加工精度影响的基础上,结合研抛工艺给出了金刚石刀具刃口研抛辅助机构的要求,并对金刚石刀具刃口研抛辅助机构的总体方案及其微进给机构和微摆幅机构进行了设计。     

聚羧酸助磨剂合成及其性能

利用水泥粉磨过程中的机械力促使水解聚马来酸酐（HPMA）与聚乙二醇单甲醚（MPEG）进行酯化反应形成聚羧酸助磨剂。试验研究了HPMA、MPEG、HPMA与MPEG的混合物、HPMA与MPEG的反应合成物对水泥助磨效果以及对砂浆性能的影响。结果表明,HPMA与MPEG都有一定的助磨性,HPMA与MPEG的混合物和反应合成物具有更佳的助磨性能,且可以改善水泥砂浆的流动性能和显著提高水泥砂浆的早期强度。激光拉曼光谱测试表明HPMA与MPEG的混合物和反应合成物与水泥共同粉磨后吸附在水泥颗粒表面,具有相似的拉曼位移图谱。     

基于HHT的磨床磨削颤振特征量提取方法

针对数控磨床磨削加工过程中的颤振现象,提出一种基于希尔伯特黄变换的磨削颤振特征量提取方法。采用经验模式分解,将信号分解成具有不同特征时间尺度的固有模态函数分量,筛选合适的分量,提取其颤振特征量实时方差和瞬时能量,并将其作为判断磨削发生颤振的依据。模拟仿真结果表明：基于希尔伯特一黄变换提取的磨削颤振特征量,可以作为颤振发生的判断依据。     

微-纳米复合陶瓷超声振动磨削的塑性-脆性 转变特征研究

基于工件超声振动磨削的单磨粒运动模型,建立超声振动磨削单磨粒最大切削厚度agm ax公式;基于压痕断裂力学,给出硬脆材料超声振动磨削塑性-脆性转变临界条件,进行超声振动磨削与普通磨削对比试验,应用SEM和AFM分析陶瓷磨削表面微观形貌特征,重点研究磨削参数对其塑性-脆性转变特征的影响。研究结果表明,砂轮平均磨粒尺寸是影响塑性-脆性转变最为主要的因素,砂轮速度对其影响次之,磨削深度对塑性-脆性转变的影响最小;得出只有当agm ax小于临界切削深度agc时,才能实现硬脆材料塑性域磨削的重要结论。     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

The Nickel base Superalloys are the most famous complicated and useable of Superalloys to make hot zone components of the gas turbines. The complicated dimensional tolerances, specially at the root of the blade show importance of grinding processes at the production of blades root. The prediction of the effect of machining parameters on the soundness of component surface strengthening for reaching to a suitable surface finishing and avoiding from crack formation at the work part during machining operation often is not easy and feasible so needs to more industrial investigation.This research is about frame 5 blade designed by GE and made from Superalloy IN738LC has been investigated. The formation of a plastically deformed and heat affected zone during grinding of Superalloy IN738LC with a high depth of cut but slow work speed (creep feed grinding) was investigated. Parameters such as work speed, depth of cut and radial dressing speed have been considered as variables and their effects have been studied. During experimental performed, the voltage and current of motor measured and power and special energy calculated.Some samples heat-treated (of the 1176℃ for 1 hr under neutral argon gas and cooling rate of 15℃/min up to 537℃ and then air cooling) to study grains recrystallization. Other samples have been created from the roots of blades and then coated by Nickel to measure boundary layer micro-hardness. The results show that increasing work speed leads to increasing the use power. Increasing the depth of cut, by increasing material removal rate, and the radial dressing speed, by decreasing power, lead to decreasing special energy. The temperature created by grinding lead to decreasing plastic deformation and boundary layer formation. When the radial dressing speed changes from 1 to 0.6μm/rev and other parameters are kept unchanged the roughness of surface increases and the special energy decreases. Sufficient dressing is very essential in limiting the width of the molten zone to few micrometers. As a result, it was found that local melting at contact spots to be a rather common mechanism during grinding of superalloys, lead to so-called white layers which can easily be observed on metallographic cross sections.     

250m/s超高速磨床主轴磁浮轴承设计

本文介绍了磁浮轴承的优点，并针对一台250m/s超高速磨床主轴系统，首次进行了磁浮轴承设计，其结果对我国发展高速主轴技术有一定意义。