硅黄铜铸件的渗漏缺陷分析

为了满足耐海水腐蚀、高导热率和承压能力要求,冷却器盖均采用硅黄铜制造。某厂在冷却器盖的生产过程中,铸件废品率高达60%,主要问题是铸件在水压测试中出现渗漏。分析了冷却器盖铸件的渗漏缺陷。结果表明:硅的加入量和浇注温度偏高,硅熔化不完全是导致此类铸件产生渗漏的主要原因。针对性地采取措施后,冷却器盖铸件的成品率大幅提高,达到了90%以上。     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.     

��������еĶഫ������Ϣ�ںϼ���

 多传感器信息融合是一个新的研究领域，它应用到故障诊断领域还是近几年的事。文章主要论述了多传感器信息融合技术的基本概念、工作原理及常用方法，同时还介绍了其在故障诊断中的应用实例。     

用直接纺丝法制芳纶短纤维

研究了直接纺丝制取芳纶短纤维的新方法。讨论了纤维长度、直径及力学性能与纺丝条件的关系。发现影响纤维长度的主要因素是空气层高度和喷丝速度,影响纤维直径的主要因素为喷口直径及喷丝速度。此外,还用PPTA短纤维制成了均匀的PPTA"浆粕"纤维。     

采用“两级跳间隙镀”电源的无氰碱铜工艺研究

回顾了对无氰碱铜研究历史中的经验教训。在大量试验基础上，提出了一种706无氰碱铜工艺。对配位剂的恰当选择、组合及工艺条件控制，能将临界活化电流密度降得很小，使钢铁件上能在宽JK范围内直接预镀铜而取得良好结合力。用开发的“冲击镀加间隙镀两级跳自动电源”，更有利于提高结合力及提高抗阴阳离子杂质影响能力。加入适量硝酸钾能降低液温并提高允许JK，有利于无氰加厚镀铜及复杂管件装饰镀。     

断裂构造发育对贵州两岔河水库岩溶渗漏的影响研究

贵州两岔口水库地质环境复杂,断层构造发育破坏了库区地层结构,导致岩溶渗漏。为保证两岔河水库的正常运行,主要针对其岩溶渗漏的地质问题,在开展工程地质测绘、岩溶调查统计、钻孔勘探及压水试验等工作的基础上,分析了断裂构造对地层结构、岩体完整性、岩溶发育及水库渗漏的控制影响。研究表明:断层构造发育破坏了库区地层结构,形成"构造切口",水库左岸不能形成地层封闭;岩体完整程度为破碎—极破碎,地下岩溶强发育,易形成水库岩溶渗漏;地下岩溶管道发育方向基本和断层走向一致,断层构造对岩溶发育起着明显的控制作用;水库渗漏为折线式复合型渗漏。研究成果为岩溶地区水库防渗处理提供参考。     

电除尘器绝缘子的设计与选择

根据电除尘器绝缘子的功能、工况条件等特点，分别从材质、外形尺寸等方面介绍了设计和选择的注意事项。为用户合理地选择电除尘器绝缘子提供了帮助。     

自密封阀在氨汽提尿素装置中的应用与维修

介绍自密封阀的密封原理及其在氨汽提尿素装置中的应用,对其长期运行中出现的泄漏及泄漏原因进行分析,根据不同的泄漏方式分别提出了现场维修的方法.     

The role of pressure on thin amorphous carbon films deposited using microwave surface wave plasma CVD

We report the effects of gas composition pressure (GCP) on the optical, structural and electrical properties of thin amorphous carbon (a-C) films grown on p-type silicon and quartz substrates by microwave surface wave plasma chemical vapor deposition (MW SWP CVD). The films, deposited at various GCPs ranging from 50 to 110 Pa, were studied by UV/VIS/NIR spectroscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and current–voltage characteristics. The optical band gap of the a-C film was tailored to a relatively high range, 2.3–2.6 eV by manipulating GCPs from 50 to 110 Pa. Also, spin density strongly depended on the band gap of the a-C films. Raman spectra showed qualitative structured changes due to sp³/sp² carbon bonding network. The surfaces of the films are found to be very smooth and uniform (RMS roughness < 0.5 nm). The photovoltaic measurements under light illumination (AM 1.5, 100 mW/cm²) show that short-circuit current density, open-circuit voltage, fill factor and photo-conversion efficiency of the film deposited at 50 Pa were 6.4 μA/cm², 126 mV, 0.164 and 1.4 × 10^− 4% respectively.