角调谐飞秒同步泵浦KTP红外光参量振荡器

用平均输出功率为１．１Ｗ，脉宽为９０ｆｓ的商用再生锁模Ｔｉ：Ｓａｐｐｈｉｒｅ激光器作为泵浦源，用ＫＴＰ作为非线性光学介质，制成一台同步泵浦飞秒光学参量振荡器。其输出调谐范围为１．０４μｍ至１．２６μｍ，平均输出功率在１００ｍｗ左右，脉宽仅约１００ｆｓ。     

海上靶场角度量录取系统的研制

本文详细叙述了海上靶场角度量录取糸统的组成、测试原理及其功能设计，简要介绍了该系统在靶扬的应用情况．     

一种双光束自动测试光栅绝对与相对光谱衍射效率的原理性方案

提出了一种快速自动测试光栅光谱衍射效率的新方法。重点推导了测试平面光栅绝对光谱衍射效率与相对光谱衍射效率公式，介绍了双光束高精度自动测试光栅光谱衍射效率曲线的基本原理、方案与方法，并分析了测试精度。研究表明，本方案的测试速度和精度均比一般测试方法提高一倍，并能有效地消除光源波动对测量结果的影响，测量误差小于５×１０－３。     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

浅谈水文过河缆道建设施工过程中的质量控制

应用水文过河缆道测验在传统水文测验中是一种行之有效的测验手段。本文主要结合黄河水文近年来开展的水文测报水平升级活动和现代化建设过程中取得的成功经验,分析说明水文过河缆道建设施工过程中的质量控制措施和方法。     

公伯峡水电站高压电缆设计几个技术问题分析

结合公伯峡水电站电缆系统设计，对合理选择电缆截面、敷设方式及保护措施等技术问题加以介绍。由于目前电缆设计标准不太完善，因此设计中应结合电站具体情况，合理地选择和提出技术要求。     

Energy indicators for tracking sustainability in developing countries

Due to the fact that human activities and most sustainability issues are closely related to energy use, the energy system is a sound framework for providing lead indicators for sustainable development. Common energy-economic models enable the estimation of future states of the energy system. An energy system-based lead indicator set can be used to develop consistent and coherent future indicator estimates and to track sustainability, a clear advantage over existing sets.     

软测量的工程化设计

将软测量应用到工业生产之前必须解决其工程化设计的问题.为此,在软测量技术理论研究和应用经验的基础上,对软测量工程化设计中应解决的关键问题和解决方法进行了研究.软测量的工程化设计包括机理分析、辅助变量选择、数据采集和预处理、建立软测量模型、设计校正模块等步骤.其关键技术在于软测量过程的数据处理、模型的建立和校正.并以杭州龙山化工厂碳酸化塔中C02浓度软测量的工程化设计为例,对工程化设计中的一些关键问题处理进行介绍.实践表明,软测量的工程化设计在实际工业生产中具有很好的应用性和指导性,但也有待更进一步的研究.     

100 mm一等量块自动测量仪测量不确定度评定

分析了100mm一等量块自动测量仪的误差来源，确定了测量量块的合成标准不确定度和扩展不确定度。