夹钳式承载架结构及应用介绍

介绍了一种在特大型变压器运输中采用的夹钳车承栽架的基本结构,分析了承栽架应具有的各个自由度,并对夹钳式承栽架的不同方案进行了比较和分析。     

溶胶玻璃原位合成碳纳米管的研究

目前，碳纳米管的各种制备方法如电弧法、激光消融法、催化热解法及化学气相沉积法等，都是在500～3500℃温度范围内经由气固相接触表面合成的，从而使反应的深度和广度都受到了限制．利用固相热解法尝试在溶胶玻璃中原位合成碳纳米管，该方法可以使反应在整个固相范围内同时发生，而不只是在气固相的表面合成．在制备样品的过程中采用了溶胶-凝胶法，成功地将碳源(乙酰丙酮)和催化剂(硝酸钴)均匀地分散在SiO，溶胶玻璃中，制备了纳米级的复合材料．另外，选择了乙酰丙酮作碳源，将碳纳米管的合成温度降到了400℃，实现了在低温固相条件下原位合成碳纳米管．最后通过TEM对生成的纳米碳管进行表征．     

Q345C低合金高强度结构钢板的试制

介绍采用氧气顶吹转炉→吹氩喂丝→板坯连铸→控制轧制生产Q345C低合金高强度结构钢板的生产工艺。通过对化学成分的合理设计及制订适合该厂冶炼、连铸、轧制的工艺，采取微合金化和控轧控冷相结合的有效技术措施，提高钢板的综合性能，特别是低温冲击韧性。生产的Q345C钢板，其产品质量完全符合GB／T1591—94标准要求。     

电力负荷管理系统的现状及发展

介绍了电力负荷管理系统的基本现状，并对该系统为适应新形势下供电部门的需求而必须完善和加强的功能做了详细的说明。     

集中荷载作用下R.C.双向受弯约束梁斜截面抗剪强度的计算

在13根集中荷载作用下钢筋砼双向受弯约束梁斜截面抗剪试验研究的基础上，采用等效梭形截面法，将双向受弯约束梁转化为单向受弯约束梁，并推出集中荷载作用下钢筋混凝土双向受弯约束梁斜截面抗剪强度的计算方法．     

Microforms in Gravel Bed Rivers: Formation, Disintegration, and Effects on Bedload Transport

This research aims to advance current knowledge on cluster formation and evolution by tackling some of the aspects associated with cluster microtopography and the effects of clusters on bedload transport. The specific objectives of the study are (1) to identify the bed shear stress range in which clusters form and disintegrate, (2) to quantitatively describe the spacing characteristics and orientation of clusters with respect to flow characteristics, (3) to quantify the effects clusters have on the mean bedload rate, and (4) to assess the effects of clusters on the pulsating nature of bedload. In order to meet the objectives of this study, two main experimental scenarios, namely, Test Series A and B (20 experiments overall) are considered in a laboratory flume under well-controlled conditions. Series A tests are performed to address objectives (1) and (2) while Series B is designed to meet objectives (3) and (4). Results show that cluster microforms develop in uniform sediment at 1.25 to 2 times the Shields parameter of an individual particle and start disintegrating at about 2.25 times the Shields parameter. It is found that during an unsteady flow event, effects of clusters on bedload transport rate can be classified in three different phases: a sink phase where clusters absorb incoming sediment, a neutral phase where clusters do not affect bedload, and a source phase where clusters release particles. Clusters also increase the magnitude of the fluctuations in bedload transport rate, showing that clusters amplify the unsteady nature of bedload transport. A fourth-order autoregressive, autoregressive integrated moving average model is employed to describe the time series of bedload and provide a predictive formula for predicting bedload at different periods. Finally, a change-point analysis enhanced with a binary segmentation procedure is performed to identify the abrupt changes in the bedload statistic characteristics due to the effects of clusters and detect the different phases in bedload time series using probability theory. The analysis verifies the experimental findings that three phases are detected in the bedload rate time series structure, namely, sink, neutral, and source.     

ТДГ3．15万kVA主变压器经济运行分析

根据电力变压器功率损耗的分析，找到ТДГ3．15万kVA2台主变压器的功率损耗与负荷率β的函数关系，并对该2台主变压器的经济运行进行了探讨，计算出了经济运行点。     

Repair of notched beam under dynamic load using piezoelectric patch

In this paper, the repair of a cracked beam under an external dynamic load employing the electro-mechanical characteristic of piezoelectric material to induce a local moment is presented. Conceptually, an external voltage is applied to actuate a piezoelectric patch bonded on the beam to effect closure of a crack so that the singularity at the crack tip under dynamic load may be decreased. Globally, this has the effect of altering the resonant frequency of the cracked beam towards that of the healthy beam, which is the criterion used for the repair. To demonstrate the repair methodology, a cantilever beam is used as an illustration, where the repair moment coefficient and the voltage required are mathematically derived. The relationship between repair moment coefficient, crack parameters and length of piezoelectric patch is investigated. The difference between the proposed repair criterion and an earlier published criterion for cracked beam under static load is also shown. A numerical example is used to study the effectiveness of the proposed repair methodology and its results are compared with those from 3-D finite element analyses using ABAQUS 6.4 as one means of verification.     

Low-temperature X-ray microanalysis of the differentiating vascular tissue in root tips of Lemna minor L

The fracture faces of bulk-frozen tissue offer a number of advantages for the analysis of diffusible elements. They are easy to prepare, remain uncontaminated, and, unlike most frozen-hydrated sections, can be shown to exist in a fully hydrated state throughout examination and analysis. Root tips of Lemna minor briefly treated with a polymeric cryoprotectant are quench frozen in melting nitrogen. Fractures are prepared using the AMRAY Biochamber, lightly etched if necessary to reveal surface detail and carbon coated while maintaining the specimen at 110 K. The frozen-hydrated fracture faces are analysed at 110 K using the P/B ratio method which is less sensitive to changes in surface geometry and variations in beam current. The method has been used to investigate the distribution of seven elements (Na+, Mg⁺⁺, P, S, Cl^?, K+ and Ca⁺⁺) in the developing vascular tissue of the root tip. The microprobe can measure relative elemental ratios at the cellular level and the results from this present study reveal important variations in different parts of the root. The younger, more actively dividing cells, appear to have a slightly higher concentration of diffusible ions in comparison to the somewhat older tissues which have begun to differentiate into what are presumed to be functional vascular elements.     

小流量灰浆泵组合密封设计

用于输送含有细小颗粒流体的小流量（0．5～5t／h）氢氧化钙浆液泵的机械密封，极易被溶液中含有的固体颗粒磨损而丧失密封性能。针对这一问题，提出了一种背叶片加上橡胶波纹管机械密封组合的密封结构，并辅之以溢流结构来保护电机，从而解决了灰浆泵的密封问题，延长了泵的使用寿命，使泵装置的体积大大缩小，且易于维修。本文阐述了这种组合密封结构的原理及尺寸设计。