STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

1. IntroductionSolar selective thiIl solid fil1us are the key part for solar heat collect'ors. But ll1ostfactories still produced solar absorptive filn1s by traditional tecIl11ology sucl1 as pai1ltillga1ld electrocl1eluical process that nlust result in po…     

MICROSTRUCTURE AND PROPERTIES OF C-Cu NANOSTRUCTURE THIN FILM

Nanostructured C-Cu thin films were deposited by reactive sputtering method and co-sputtering method. The relationships between microstructures, properties, and depo-sition parameters were studied and the results obtained from TEM, AFM, and XPS.indicate that the thin films are nanostructural, and have good in-depth uniformity. Theselected area electron diffraction (SAED) found that the nanosize Cu particles havethe fcc structure and the others are amorphous carbon or nanocrystallized graphiticcarbon. The peak positions of the Cu and C in XPS indicate them to be at the ele-mental state. In the IR transmission spectrum, diamond two-phonon absorption andgraphite Raman peaks were observed, which suggests microcrystal diamond particlesand graphite components exist in the C-Cu film. The higher electrical resistivity wasobtained.     

CVD金刚石膜{100}取向在改进化学反应模型下生长的原子尺度模拟

建立了CVD金刚石膜{100}取向生长过程中的化学反应模型，表面吸附生长机制以沟槽处碳氢组元加入的机制为主，并用改进的KMC方法在原子尺度上模拟了该模型下（100）表面的生长过程，给出了衬底温度和甲基浓度等操作参数对膜质量的影响，结果表明，该化学反应模型能够较实际地揭示{100}取向CVD金刚石膜的生长。     

Impact toughness of tungsten films deposited on martensite stainless steel

Tungsten films were deposited on stainless steel Charpy specimens by magnetron sputtering followed by electron beam heat treatment. Charpy impact tests and scanning electron microscopy were used to investigate the ductile-brittle transition behavior of the specimens. With decreasing test temperature the fracture mode was transformed from ductile to brittle for both kinds of specimens with and without W films. The data of the crack initiation energy, crack propagation energy, impact absorbing energy, fracture time and deflection as well as the fracture morphologies at test temperature of-70 ℃ show that W films can improve the impact toughness of stainless steel.     

Structure, magnetization, and magnetostriction of Sm-R-Fe （R = Pr, Nd） thin films

The structure, magnetization, and magnetostriction of Sm0.9Pr0.1Fex and Sm1-xNdxFel.9 thin films have been investigated using X-ray diffraction, vibrating sample magnetometer, and optical cantilever method. It is found that the structure of Sm0.9Pr0.1Fex thin films consists of an Sm-Pr-Fe amorphous phase when x≤2.69 and that of Sm1-xNdxFel.9 thin films consists of an Sm-Nd-Fe amorphous phase. The in-plane magnetization of Sm0.91Pr0.1Fex thin films increases with increase in the Fe content, and low values of the in-plane coercivity occur in the range of 1.62≤ x≤ 2.28. The magnetostriction value of Sm0.91Pr0.1Fex thin films increases with increasing the Fe content when x ≤ 1.94 and decreases when x 〉 1.94. The in-plane magnetostriction of Sm1-xNdxFe1.9 thin films under low magnetic fields has been improved by the substitution of Nd for Sm when x = 0.2.     

PVDFѹ�籡Ĥ������������

 传感器采用的28 μm厚的4层结构PVDF压电薄膜制成，传感器表面电极形状的制作采用剪切加丙酮腐蚀的方法，保证了传感器有一定的非金属化的边缘。对于电极的引出是将传感器上、下电极面引脚错开，引出电极比较容易做到穿透式，采用压接端子压接和空心小铆钉铆接两种方法。     

关于中国加入WTO后影视高等教育体系的构想

关于中国加入WTO以后,如何适应新的形势和面对新的竞争,从而构建新的影视高等教育体系?本文从以下三个方面进行了论述:21世纪是彩色读图时代,影视知识技术是人才所必备的三大基本知识技术之一;中国的影视教育必须构建学历教育、职业技能教育和成人继续教育相结合的国民教育体系以及四合一的教育教学模式和产学研相结合的人才培养体制及其运行机制。     

THE PREPARATION AND CHARACTERISTICS STUDY OF TiNxOy SPECTRAL SELECTIVE ABSORBING FILM BY MAGNETRON SPUTTERING

Spectral selective absorbent film is a crucial factor for the solar heating device. There are many kinds of spectral selective absorbing film made by different ways. TiNxOy thin film with excellent spectral selecting absobent property were successfully prepared by DC magnetron sputtering with Ar as working gas, N2 and O2 as reactive gas, 99.9% titanium as the target and is copper slice as the substrate. In this article, the optical characteristics and microstructure of TiNxOy thin film were studied. Inputing O2 can decrease the reflection of the visible lights, and double layer film can get good absorption for solar energy.     

工艺条件对YBCO厚膜基带晶粒取向的影响

用Ｘ射线方法研究了平行于基带表面的Ｎｉ（２０Ｏ），Ｎｉ（１１１），ＮｉＯ（２００）和ＮｉＯ（１１１）晶面的取向分数Ｗ。结果表明，随预热处理温度的提高，虽然Ｗ_（ＮｉＯ（２００））也会随之提高，但是区域重加热处理对提高Ｗ_（ＮｉＯ（２００））起着最重要的作用。９００℃预热处理之后，在１１００℃进行区域重加热可使Ｗ_（ＮｉＯ（２００））提高到０．９９以上。     

Co和Cu薄膜电学特性和连续性特征的判据

采用离子束溅射沉积了不同厚度的Co膜和Cu膜,利用四电极法测量了薄膜的电阻率,从而得到了Co膜和Cu膜的电导率随薄膜厚度的变化关系。实验结果表明,Co膜和Cu膜的电学特性都具有明显的尺寸效应。比较了同时考虑表面散射和晶界散射的电导理论得到的电导率公式与实验结果,不同薄膜厚度电导率的理论结果与实验结果符合较好。提出了厚度作为金属薄膜生长从不连续膜进入连续膜的一个特征判据,并利用原子力显微镜(AFM)观测了膜厚在特征厚度附近的Co膜和Cu膜的表面形貌。