Study on the anodic film formation process of AZ91D magnesium alloy

The formation of anodic film of AZ91D magnesium alloy has been investigated by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, anodic polarization curve, current-time transients and SEM technique. The results show that, under our experimental conditions, the formation of AZ91D anodic film follows the mechanism of 3D nucleation with diffusion controlled growth. With the increase of applied anodizing potential, the nucleation type of anodic film changes from progressive to instantaneous. The results also show that the initially formed anodized film is threadlike and porous, and high potential is essential for the formation of good anodic film with excellent properties.     

光信息存储与溅射靶材

在光盘制造过程中，需要使用多种溅射靶材。本文简介溅射靶材的制造及主要应用情况。     

改性丙烯酸-环氧树脂纳米乳液的制备及应用

介绍了水性丙烯酸-环氧树脂纳米乳液的制备及其在油罐防腐工程中的应用。讨论了亲水侧链聚乙二醇相对分子质量大小对涂膜性能的影响以及乳化剂各组分的用量对乳液粒径的影响。     

含羧酸铈光敏剂的LDPE地膜应用研究

研究了羧酸铈光敏剂及其配合体系的组成、各组分的协同关系和作用,讨论了其配合体系对聚乙烯地膜断裂伸长率、羰基指数和分子量的影响,并进行了农田覆盖地膜应用试验。结果表明,含羧酸铈光敏剂配合体系的聚乙烯地膜具有良好的使用性能和光降解可控性能。     

电子陶瓷材料研究的一些新进展

随着电子科学技术的发展，用作电子材料的陶瓷的研究和开发十分引人注目，许多工厂和科研人员正在研究开发电子陶瓷新材料、新工艺和新器件，以满足电子科学技术的发展对高性能陶瓷材料的要求。本文简要介绍了电子陶瓷系统中绝缘体、介电质、压电体及铁电薄膜材料及其制备工艺和应用方面的一些新进展。     

耐高温绝缘涂层的研制

采用有机硅树脂、无机粘结剂和无机填料制备的有机无机复合耐高温绝缘漆，其涂层经600℃，1h的热处理后可具有良好的附着力和绝缘性能。配套后的绝缘涂层，可在250℃下长期使用，并具有良好的耐冷热循环、耐湿热的能力。     

含稀土多金属氧酸盐的杂化)自组装膜的制备和光学性质研究

用自组装方法构建含稀土多金属氧酸盐和聚丙烯胺的有机-无机杂化多层膜.用紫外可见光谱、原子力显微镜、X射线衍射等测试手段表征了膜的结构.计算了此杂化多层膜上分子的密度和独特的排列状态,以及分子在膜上逐层按比例的增长,用荧光光谱检测了自组装膜发光性能.指出在杂化自组装膜上,稀土的发光特性依然得到保持.     

Ni-ZrO2纳米复合电铸层抗高温氧化性能的研究

通过间歇式抗高温氧化实验,建立了纯镍电铸层和N i-ZrO2纳米复合电铸层高温氧化动力学模型,分析了电铸层表面和横截面的形貌,测定了电铸层的组织结构。结果表明,N i-ZrO2纳米复合电铸层抗高温氧化性能明显优于纯镍铸层,复合电铸层表面生成的氧化膜晶粒细小且致密,并且该氧化膜较薄,产生的内应力较小,与复合电铸层的黏附性较好。     

Studies on film potentiometric stripping analysis: effects of electrochemical parameters

Film potentiometric stripping analysis (PSA) is a novel method for concentrating the test ion directly on a glassy carbon electrode with subsequent stripping by a chemical oxidant, the redissolution step being followed by a chronopotentiometric sequence. The electrochemical parameters governing both preconcentration and redissolution steps are studied on a rotating disk electrode: experimental results are compared with the theoretical developments recently published. Except for the influence of rde rotation rates on each step and on analytical parameters, experiments and theory are in agreement. Discrepancies concerning the rotation rate effects are studied by potentiostatic coulometry and voltammetry measurements in regard to the preconcentration step: the rotation rate effects are based on the physical behaviour of the rde. Routine analysis is carried out using film PSA, Pb(II) as the test ion and Fe(III) as oxidizing agent, in perchlorate medium.