环形橡胶径向刚度特性仿真分析

利用ANSYS软件建立了环形橡胶的有限元参数化模型,将对模型仿真所得结果与已有数据进行对比,验证了仿真模型的正确性,实现了环形橡胶径向刚度的快速计算.在此基础上,分析了内外圆柱面半径与轴向长度对环形橡胶简化径向刚度值的影响,研究了环形橡胶的径向刚度特性,确立了在环形橡胶实际设计中需要考虑的要点,为环形橡胶的设计提供了依据.     

高速超宽带系统中频谱优化方法的研究

脉冲波形设计和频谱控制是超宽带通信系统解决频谱共存和相互干扰问题的关键。提出了基于最小面积准则(LAC)的频谱优化方法,并将其应用在正交脉冲调制超宽带系统中。该系统由多条并行发送支路组成,每条支路利用正交脉冲进行脉冲位置调制(PPM)与脉冲形状调制(PSM)相结合的调制。仿真结果表明:利用LAC优化的结果和最小均方误差准则(MMSE)相比更符合FCC的要求,不仅能提高频谱利用率,还能实现对频谱的灵活控制。     

巴洛沙星的合成研究

巴洛沙星是一种新型喹诺酮类抗感染药物。从反应温度、反应时间、反应物料摩尔配比和反应溶剂等对合成的影响进行了详细研究。结果表明,其优惠工艺合成条件为:以S1为溶剂,反应温度40℃,反应时间4 h,反应物料摩尔配比n螯合物Ⅰ∶nMAP=1∶1,产品收率79.5%,含量91.4%。     

风机冷风保安控制系统优化

介绍菜钢型钢AV80风机冷风保安控制系统的优化改造,以增加其控制安全性及可靠性.     

Probabilistic and interval reliability design of the composite pressure vessel

Considering the randomness or interval character of physical parameters and applied loads of composite pressure vessels (COPV), the COPV reliability-analyzing model is built. And then the computational expressions for the mean value, standard deviation and deviation of fiber stress are deduced by the random factor method. The probabilistic and interval reliability designs on COPV are implemented by utilizing the probabilistic method and interval method combined with the improved particle swarm optimization (PSO) algorithm, respectively. The influence of fluctuation of structure uncertain parameters on COPV design thickness is inspected. Finally, examples are given to demonstrate that both probabilistic and interval reliability methods can satisfy the safety requirement and both are of higher rationality than the traditional safety factor method. And probabilistic method has a lower relative error but a higher computational complexity contrasted with the interval method.     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.     

Connecting parameters optimization on unsymmetrical twin-tower structure linked by sky-bridge

Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge, the frequency response functions, the displacement power spectral density （PSD） functions, and the time-averaged total vibration energy were derived, by assuming the white noise as the earthquake excitation. The effects of connecting parameters, such as linking stiffness ratio and linking damping ratio, on the structural vibration responses were then studied, and the optimal connecting parameters were obtained to minimize the vibration energy of either the independent monomer tower or the integral structure. The influences of sky-bridge elevation position on the optimal connecting parameters were also discussed. Finally, the distribution characteristics of the top displacement PSD and the structural responses, excited by El Centro, Taft and artificial waves, were compared in both frequency and time domain. It is found that the connecting parameters at either end of connection interactively affect the responses of the towers. The optimal connecting parameters can greatly improve the damping connections on their seismic reduction effectiveness, but are unable to reduce the seismic responses of the towers to the best extent simultaneously. It is also indicated that the optimal connecting parameters derived from the simplified 3-DOF model are applicable for two multi-story structures linked by a sky-bridge with dampers. The seismic reduction effectiveness obtained varies from 0.3 to 1.0 with different sky-bridge mass ratio. The displacement responses of the example structures are reduced by approximately 22% with sky-bridge connections.     

高职院校绩效工资制度存在的问题及对策——以武汉某职院人事分配制度为背景

为了最大程度地调动教职工的积极性和创造性,提高办学质量和办学效率,高职院校纷纷进行人事分配制度改革。由于高职院校存在着教师教育教学活动的投入难以可靠计量、教育教学活动的产出难以可靠测量以及教学效果难以可靠评估等特殊性,导致高校绩效工资制度的改革难以达到"效率优先,兼顾公平"的预期效果。本文以武汉某职院人事分配制度的改革方案为背景,由个别到一般,分析高职院校绩效工资改革存在的不足,并就如何进一步优化高职院校绩效工资制度改革提出意见和建议。     

Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments

This paper presents a new model for simultaneous diffusion and precipitation of chemical elements in metallic matrices, a scheme for its numerical solution, and several applications to problems of internal oxidation. The model basically stands as an extension of the classical Wagner model for internal oxidation of steels, but is more much general in that it allows for an arbitrary number of diffusing chemical elements, an arbitrary number of precipitate phases with arbitrary compositions, dependence of diffusion coefficients and solubility products upon (time-dependent) temperature, etc., thus allowing for a much broader range of applications. As a counterpart, it is generally impossible to solve the complex, non-linear equations of the model analytically, but this can be done numerically. The simple but efficient numerical scheme proposed is based on explicit 1D finite differences. Experience has shown that this scheme, in spite of its rusticity and the restrictions it imposes on the time-step, is more efficient than more elaborate strategies based on the finite-element method. The applications presented are concerned with internal oxidation of steels during annealing processes. The model and associated numerical scheme allow for evaluation of the amounts of the various oxide precipitates in the external layer of the sheet. This opens the way, through numerical parametric studies of the influence of the process parameters and the chemical composition, to the improvement of existing treatments and the development of new steel grades.