基于免疫抗体生成算法的电力变压器故障诊断

提出了一种基于人工免疫的抗体生成算法,并将其应用于电力变压器的故障诊断。抗体生成算法仿生生物免疫系统中抗体对抗原的识别与记忆的机理,先对训练样本进行免疫学习和记忆,提取表征样本的有效特征,形成表征样本特征的记忆抗体集,再用最邻近分类法对测试样本进行分类识别。UCI的Iris数据集和电力变压器故障数据的仿真分析结果表明,抗体生成算法能够进行有效的分类,并具有很高的准确率。     

基于有限体积法的G4-73型离心风机三维流场数值模拟

基于有限体积法,利用Fluent软件对G4-73型离心风机内部流场进行了全三维数值模拟。结果表明:蜗壳内的低能流体区沿轴向朝流动方向推进;叶轮内的静压和动压在叶片吸力面靠近叶轮进口处最低,叶轮流道中动压等值线呈"凸"型分布,在叶片压力面靠近叶轮出口处静压和动压达到最大值,且叶轮出口相对总压损失集中在吸力面和前盘侧。     

Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.     

Solvent free oxidation of alcohols catalyzed by KMnO4 adsorbed on Kieselguhr

Efficient and selective oxidation of primary and secondary alcohols to the corresponding aldehydes and ketones catalyzed by potassium permanganate supported on Kieselguhr reagent under solvent free conditions are reported.     

铝电解槽添加锂镁盐工业试验研究

本文论述了在20kA侧插自熔铝电解槽中添加锂盐、镁盐及锂镁盐复合剂的试验过程和技术经济效果。认为在铝电解槽中添加上述盐类在技术上是可行的,在经济上是有利的。对提高铝电解槽的电流效率和降低直流电单耗具有显著作用。     

Design of the low power wake-up receiver for internet of things communication

A wake-up receiver with high energy efficiency and low power consumption is proposed for solving the power consuming problems of wireless nodes communication in the Internet of Things. The proposed wake-up receiver based on the wake-up mechanism can effectively schedule the network nodes communication, and use the simple envelope detection structure to achieve frequency down-conversion, which can flexibly manage energy and reduce power consumption. Based on UMC 65nm CMOS process technology, the wake-up receiver is designed and simulated. The results show that it can achieve S₁₁ of -21dBm and a sensitivity of -75dBm at a data rate of 1Mb/s, when operating at the central frequency of 780MHz and input signal adopting an on-off keying (OOK) modulation, and the power consumption is 82μW at 1.2V voltage supply.     

A customised approach to determining the geomorphic effectiveness of small flood events in a regulated river

The construction of dams significantly alters flow and sediment regimes with subsequent deleterious effects on the morphological and ecological character of rivers. Effective experimental floods can ameliorate the downstream geomorphic impacts of dams. The traditional view is that large floods are required to perform effective geomorphic work, and the geomorphic outcomes of small floods are often overlooked. Many river restoration frameworks do not consider small floods. Yet, there is evidence that the hydrological characteristics that ameliorate specific geomorphic impacts in a river are unique to each river, and a customised approach to setting the right mix of floods (including small experimental floods) is needed. In this study, we modify an existing flood effectiveness model developed for large floods, for determining the geomorphic effectiveness of small floods in a highly regulated Australian river. Two flood classes were added to the model (medium peak stream power and moderate total energy expenditure), and the flood power characteristics were rescaled to reflect the relative difference in the magnitude of the small floods and the magnitude of the geomorphic work performed. Using a step‐wise approach, this customised model determined the geomorphic effectiveness of small floods. The best flood for ameliorating the geomorphic impacts of flow regulation had medium to long duration (10 to 51 days), high peak unit stream power (77 to 123 Wm^?2) and moderate to large total energy expenditure (78,600 to 342,320 × 10³ J). This approach to determining flood effectiveness for small floods is applicable to other geomorphically impacted river channels downstream of dams and can be used to inform experimental flood releases for geomorphic outcomes.     

新型无氟发泡工艺技术改进

介绍了传统无氟发泡工艺具体工况,分析了聚氨酯泡沫存在容易产生形变、强度和韧性不高和工艺中附加物分散性不佳等问题,本文提出一种改进的无氟发泡工艺,与传统的无氟发泡工艺相比,改进的无氟发泡工艺能有效解决聚氨酯泡沫易形变的问题,提高了聚氨酯的强度及韧性,增加了附加物的分散性效果,降低了发泡体系设备.对进一步改善无氟发泡工艺技术具有重要意义.     

析架空输电线路上倍容导线的选择

架空输电线路项目扩容改造,当采用倍容导线时,需在技术和经济上对倍容导线进行比较分析。文章对这种导线的种类、特性情况作了介绍,通过在220kV线路上对倍容导线的选择分析,为同类案例的处理提供了借鉴和参考。     

微小电偶腐蚀电流的准确测定

为了更多地获得电偶腐蚀的信息并揭示其本质规律，提出了电偶腐蚀试验实时监测模型。通过选用不同设备对试样的电偶腐蚀微小电流的测量，结果发现：选用现成设备测量试样的电偶腐蚀微小电流时，测量电流波动非常大，噪声明显超过实际信号输入——电偶腐蚀电流。经自行开发研制的MCD01电偶腐蚀计可以准确的测量腐蚀电流，特别是微小电偶腐蚀电流。