Investigation of Centreline Segregation and Centreline Porosity in CC ‐ Slabs

Improvements of solidification processing in conventional or near net shape casting depend on sophisticated methods of macroscopic examination of central unsoundness and inhomogeneity of the cast material. As long as remarkable deviations referring to the quality features exist between the slab centre and the bulk material such methods should be looked after. Two semi‐macroscopic methods of segregation analysis are discussed in this paper: firstly, the potential of the emission spectral analysis combined with sectioning of a sample and secondly, the computer aided micro‐probe analysis. Both methods are restricted to small local areas. The proneness of elements and steel grades with respect to micro‐ and macrosegregation as well as distribution‐ and segregation coefficients are determined. The effect of a diffusion anneal on homogenisation of segregation is studied. Last not least the precipitation of sulphides, phosphides or carbonitrides is estimated. Ultrasonic detection of the central unsoundness of conventional slabs or thin slabs is a new approach towards a quantitative macroscopic examination. The sample size is 400 mm x 300 mm x 30 mm. To achieve a low ultrasonic noise using a 5 MHz‐transducer the samples are heat treated for grain refinement. “Dog bone porosity”, macroscopic topographical misfit between the upper and lower solidifying shells, periodical corner cracks or systematic transverse centre cracks are detected. Obviously, segregations do not reflect the ultrasonic beam. However, it can be presumed that an interrelation exists between porosity and segregation, although these might be locally apart from each other. This new ultrasonic test of the central unsoundness of continuous cast (c.c.) slabs gives valuable arguments to machine builders and maintenance people to decide on the right concepts for strand guidance, support rollers and secondary cooling. Soft reduction can be optimized and variations in casting speed counteracted by dynamic means. R&D service of this kind can help steelmakers when decisions are impending to build new casting machines or revamp old ones.     

钢中非金属夹杂物显微评级方法的定量化探讨

应用ＩＢＡＳ系列图像分析系统，对建立一套与国家标准ＧＢ１０５６１─８９兼容的钢中非金属夹杂物显微评级方法的自动化和定量化标准作了可行性分析，结果表明建立这套标准是切实可行的。     

单轴-平面W型复合锶铁氧体的制备及其吸波特性研究

用草酸盐共沉淀和微量掺杂法研制六角晶系W型Ni,Zn,Co,Al多元复合锶铁氧体，通过调节Ni2W同Co2W的摩尔比例，可使该种铁氧体易磁化方向从C单轴型向垂于C轴的平面型转化，控制置换锶铁氧体中部分Fe3 的微量掺杂Al3 ，可以调整4πMs值，提高磁晶各向异性场，测试分析了5种不同含Co量的W型复合锶铁氧体粉料涂层的吸波特性，发现其自然共振吸收峰随Co含量增加向低频方向偏移，最高吸收峰可达32．8dB，是适用于电子隐形技术的高品位的微波吸收剂。     

特征提取在硅内部微/纳米级体缺陷检测中的应用

提出了一种利用特征提取来对硅中微/纳米级体缺陷的激光散射图样进行分析,以获得缺陷大小信息的分析方法.给出了该方法中第一特征值和第二特征值的定义,指出通过所提出的第一特征值及第二特征值即可迅速地判断出缺陷的大小量级所在.这种分析方法具有分析速度快,在体缺陷小于1μm时分辨率高,且可使系统实现自动化等优点.     

在道岔缺口超标报警系统中的软件设计

介绍了SED1335的性能及特点，重点阐述了它在道岔缺口超标报警系统中显示字符、汉字、构建友好界面的软件设计方法，提出了编写液晶显示程序的一些优良算法。     

镶嵌在CaF2介质中纳米Cu团簇微观结构的研究

利用磁控溅射产生金属Ｃｕ团簇，同时蒸发ＣａＦ２介质，将Ｃｕ团簇包埋在ＣａＦ２介质中，团簇大小可通过改变溅射气压控制，用ＴＥＭ研究了嵌埋团簇的结构，分析结果表明：Ｃｕ团簇呈三角状多晶结构，团簇大小为１０￣７０ｎｍ，基质ＣａＦ２晶体也为多晶结构，Ｃｕ团簇的晶格常数在包埋状态下发生了膨胀，膨胀率大约在１６％左右。     

发电机用DJL350磁极钢板的开发与应用

本文论述了高强度冷轧磁极板的试制性研究，应用性研究及在开生桥机组上的实施。通过与国外材料的对比，研究了材料的化学成分、力学性能、磁性能、金相组织及其与性能的关系。并对其实际应用效果进行了分析总结。     

单片机在监控同步电动机运行功率因数中的应用

介绍如何利用单片机自动控制同步电动机运行时的功率因数。     

微絮凝接触过滤处理低浊度含藻水的研究

通过现场试验，对微絮凝过滤处理生活用水所带来的一系列问题进行了详细、科学的分析，在大量试验数据基础上对产生问题的原因进行了研究并取得了初步结论。在此基础上，提出了改进措施，取得了实效。