基于主动学习的微博聚类分析

K Means聚类算法由于无法准确确定初始化聚类中心,容易造成 聚类结果准确率低下。对微博数据聚类时,可能会导致无法正确反映兴趣热点。本文 设计了基于主动学习的聚类算法,在确定初始聚类中心过程中应用Min Max主动学习策略, 使 得算法每次在很小数量的查询后都会提供数据点供用户进行初始中心点确认,并在K Means算 法中重新计算聚类中心时设置其权重值,从而减少迭代的数量,提高聚类结果的准确 率,并将这一算法运用于微博聚类分析,得出微博热门话题。     

Thin‐film encapsulated white organic light top‐emitting diodes using a WO3/Ag/WO3 cathode to enhance light out‐coupling

An alternative design of a semitransparent cathode for top‐emission white‐fluorescent organic light‐emitting diodes (OLEDs) has been investigated. The scope of this study was to improve the luminance of OLEDs used for displays while keeping the current density versus voltage characteristic unchanged for addressing purposes. The use of an optical simulation tool allowed the optimization of the tri‐layer cathode WO₃/Ag/WO₃ to increase the light out‐coupling coefficient of the device leading to an increased white emission compared with a reference device with a Ca/Ag cathode. An increase of ~40% in luminance has been calculated by simulation and experimentally confirmed. The p‐i‐n OLED structure underneath the tri‐layer cathode allowed an efficient injection of electrons independently from the work function of WO₃. The WO₃/Ag/WO₃ cathode has been also confirmed to be compatible with the atomic layer deposition technique for thin film encapsulation. Finally, lifetime measurements up to 600 h have been carried out to quantify the enhancements induced by the new cathode compared with the control device. It has been found that lifetimes of both cathode architectures are similar on this time scale, while the WO₃/Ag/WO₃ cathode shows a lower voltage drift versus aging.     

微型之字形压电式能量收集器输出电压的建模和仿真

为了有效解决无线传感器网络节点的供电难题,提出之字形结构的微型压电式能量收集器。相比于传统的直悬臂梁,此结构等效加大了压电梁的长度,降低了系统的固有振动频率。建立了之字形压电梁的本构方程和受迫振动方程,推导得到其输出电压的频域表达式。基于之字形压电梁的结构,利用ANSYS软件对其进行了谐响应分析。仿真结果表明,压电梁的输出电压在各阶固有振动频率处存在极值,符合理论分析的结果;输出电压大小随压电梁长度增加而降低,随压电梁宽度增加而升高,但均为非线性关系;压电梁末端质量块的长度和厚度、基体层厚度减小时,会导致输出电压的增大。在论文中所提出的结构尺寸下,10根直梁构成的之字形结构压电梁,在其一阶固有振动频率处,输出电压可达10 V以上,符合无线传感器网络节点的实际供电需求,证明了之字形压电梁结构的有效性。     

基于玻尔兹曼的微机械陀螺温度误差补偿

使用最优拟合的方法,在一定的温度范围内,对微机械陀螺仪温度误差建模,通过温度误差模型对陀螺仪输出进行温度误差补偿。应用线性拟合和玻尔兹曼拟合方法对实验数据进行按拟合修正,该方法减小了温度对微机械陀螺仪的影响,并验证玻尔兹曼误差模型的正确性与可实用性。补偿后的数据较陀螺原始数据零偏,提高了1~2个数量级。在工程实际中有一定的实用参考价值。     

基于特征映射的微博用户标签兴趣聚类方法

针对现有的用户兴趣聚类方法没有考虑用户标签之间存在的语义相关性问题,提出了一种基于特征映射的微博用户标签兴趣聚类方法。首先,获取待分析用户及其所关注用户的用户标签,选取出现频数高于设定阈值的标签构建模糊矩阵的特征维;然后,考虑标签之间的语义相关性,利用特征映射的思想将用户标签根 据其与特征维标签之间的语义相似度映射到每个特征维下,计算每个特征维所对应的特征值;最后,利用模糊聚类得到了不同阈值下的用户兴趣聚类结果。实验结果表明,本文提出的基于特征映射的微博用户标签兴趣聚类方法有效地改善了用户兴趣聚类效果。     

Sparkle measurement revisited: A closer look at the details

Four years after introduction of the first instrument for measurement of sparkle, the foundations have been reconsidered, and the pool of practical experience has been analyzed to provide a more detailed and complete picture of the subject matter. The following aspects are introduced and discussed: observation conditions and resulting requirements for imaging (sampling) and filtering, analysis of spatial periods and frequencies as a basis for filtering, spatial filtering concepts, sparkle in the frequency domain, sparkle evaluation based on analysis of single images and difference images, origins of unwanted sparkle components, scaling and offset in sparkle evaluation, and verification of the method.     

AMI通信网络中微功率无线通信的性能测试技术及系统研究

微功率无线通信是高级量测体系的主要通信方式之一,各厂家的通信模块性能不一,测试技术尚未形成统一的规范;设计了微功率无线通信的测试系统,由射频性能测试系统和协议一致性分析系统组成;系统采用屏蔽测试箱、多功能电磁波小室、综合测试分析仪、误码分析仪、标准协议信号源等模块组成,屏蔽箱对800 MHz频率以下的无线电信号有超过70dB的抑制,可以提供相对纯净的无线电暗室环境,减少外界无线电波的干扰;测试频率范围为30MHz~1GHz,提供66个测试频点,测试频率误差小于2ppm,误码测试精度小于0.001%,功率测试精度(闭环)为5%(0.2dB);实现了在实验室情况下对微功率无线网络性能的全面测试和评估,具备很好可操作性、便利性和可复现性。     

Three-dimensional surface reconstruction using meshing growing neural gas (MGNG)

The neural network method, a relatively new method in reverse engineering (RE), has the potential to reconstruct 3D models accurately and fast. A neural network (NN) is a set of interconnected neurons, in which each neuron is capable of making autonomous arithmetic and geometric calculations. Moreover, each neuron is affected by its surrounding neurons through the structure of the network. This work proposes a new approach that utilizes growing neural gas neural network (GNG NN) techniques to reconstruct a triangular manifold mesh. This method has the advantage of reconstructing the surface of an n-genus freeform object without a priori knowledge regarding the original object, its topology or its shape. The resulting mesh can be improved by extending the MGNG into an adaptive algorithm. The proposed method was also extended for micro-structure modeling. The feasibility of the proposed method is demonstrated on several examples of freeform objects with complex topologies.     

微悬臂梁谐振式气体传感器研究进展

微机械谐振式传感器已经成为微型机电系统(MEMS)领域的研究热点。讨论了微悬臂梁谐振式气体传感器的工作原理,介绍微悬臂梁表面修饰的关键技术、主要方法和基于微悬臂梁的谐振式气体传感器领域的研究状况以及近五年以来该领域的研究进展,并对基于微悬臂梁的谐振式气体传感器的发展方向和应用前景做了展望。     

基于DSP的静电悬浮转子微陀螺测控系统

开发了一种基于数字信号处理器(DSP)的静电悬浮转子微陀螺的可视化闭环测控系统.该系统是在VC33DSP平台下,采用增量式PID算法控制器,对VC33DSP开发系统的外设A/D、D/A和PCI芯片进行编程应用.具体为使用VC++编写可视化界面,对PCI芯片编程实现DSP与PC之间通信,使用VC33DSP汇编语言编程实现数据的输入输出.经编程测试,增量式汇编函数能够有效运行,为静电悬浮转子微陀螺的悬浮、旋转等检测控制实现奠定了一定的基础.