国内外苯酚的供需现状及发展前景

目前,全球苯酚的总生产能力约为926万ta/,2004年总消费量为774.5万t,预计到2009年总消费量将达到约945.2万t。2005年我国苯酚的总生产能力约为54.0万ta/,产量为44.3万t,消费量约为73.3万t。预计到2007年和2010年我国苯酚的总生产能力将分别达到约85万ta/和110万ta/,消费量将分别达到约85.0万t和96.0万t。针对目前存在的问题,提出了我国苯酚今后的发展建议。     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

Oxidative flavour deterioration of fish oil enriched milk

The oxidative deterioration of milk emulsions supplemented with 1.5 wt‐% fish oil was investigated by sensory evaluation and by determining the peroxide value and volatile oxidation products after cold storage. Two types of milk emulsions were produced, one with a highly unsaturated tuna oil (38 wt‐% of n‐3 fatty acids) and one with cod liver oil (26 wt‐% of n‐3 fatty acids). The effect of added calcium disodium ethylenediaminetetraacetate (EDTA) on oxidation was also investigated. Emulsions based on cod liver oil with a slightly elevated peroxide value (1.5 meq/kg) oxidised significantly faster than the tuna oil emulsions, having a lower initial peroxide value (0.1 meq/kg). In the tuna oil emulsions the fishy off‐flavour could not be detected throughout the storage period. Addition of 5—50 ppm EDTA significantly reduced the development of volatile oxidation products in the cod liver oil emulsions, indicating that metal chelation with EDTA could inhibit the decomposition of lipid hydroperoxides in these emulsions. This study showed that an oxidatively stable milk emulsion containing highly polyunsaturated tuna fish oil could be prepared without significant fishy off‐flavour development upon storage, provided that the initial peroxide value was sufficiently low.     

Studies on film potentiometric stripping analysis: effects of electrochemical parameters

Film potentiometric stripping analysis (PSA) is a novel method for concentrating the test ion directly on a glassy carbon electrode with subsequent stripping by a chemical oxidant, the redissolution step being followed by a chronopotentiometric sequence. The electrochemical parameters governing both preconcentration and redissolution steps are studied on a rotating disk electrode: experimental results are compared with the theoretical developments recently published. Except for the influence of rde rotation rates on each step and on analytical parameters, experiments and theory are in agreement. Discrepancies concerning the rotation rate effects are studied by potentiostatic coulometry and voltammetry measurements in regard to the preconcentration step: the rotation rate effects are based on the physical behaviour of the rde. Routine analysis is carried out using film PSA, Pb(II) as the test ion and Fe(III) as oxidizing agent, in perchlorate medium.     

原料中杂质对丙烯与苯烷基化催化剂性能的影响

分析了原料中杂质对催化剂活性和稳定性的影响及脱除杂质的方法。不同来源的丙烯所含杂质不同 ,炼厂丙烯杂质主要是氮化物和双烯 ,而裂解丙烯杂质主要是双烯 ;苯的主要杂质是饱和烷烃和微量水 ,这些杂质对催化剂活性和稳定性都有影响。实验结果表明 ,杂质含量越高 ,催化剂的活性和稳定性越低 ,而采用强酸性阳离子交换树脂可以脱除丙烯中的杂质。     

Unipol气相法聚烯烃液体催化剂技术进展

介绍了Unipol气相法聚烯烃工艺液体催化剂的成分、加入反应器的方式和喷嘴结构及控制催化剂液滴尺寸方法等方面的最新进展情况。     

FA composition and regiospecific analysis of Acer saccharum (sugar maple tree) and Acer saccharinum (silver maple tree) seed oils

GC analysis was performed to determine regiospecific distribution and FA composition in seed oils of the Aceraceae species, Acer saccharum and A. saccharinum. The oil content in the seeds was low at 5.0% in A. saccharum and 5.8% in A. saccharinum, and the main FA were linoleic (30.8 and 29.4%), oleic (21.3 and 27.6%), palmitic (10.1 and 10.5%), and cis-vaccenic (9.4 and 7.9%) acids, respectively. In addition, both oils contained long-chain monoenes of the n−9 and n−7 groups, including 11-eicosenoic, 13-docosenoic, 15-tetracosenoic, 13-eicosenoic, and 15-docosenoic acids, whereas γ-linolenic acid accounted for 0.8% of total FA in A. saccharum, and 0.5% in A. saccharinum. Regiospecific analysis, performed using the methodology of dibutyroyl derivatives of MAG, indicated that linoleic, oleic, and linolenic acids were mainly esterified at the internal position of TAG in both seed oils, whereas long-chain monoenes of the n−7 group were almost exclusively esterified on the external positions.     

不同预处理方法对玉米芯成分的影响

对辽宁康平和湖北襄樊产的两种玉米芯进行了原始成分分析,并分别用1%氢氧化钠、10%氨水、热水、氢氧化钠-过氧化氢溶液、1%硫酸进行处理,然后再进行成分测定,比较了不同的处理方法对玉米芯中纤维素、戊聚糖、木质素含量的影响。     

螺旋槽管外含高浓度不凝组分蒸汽冷凝传热研究

分析了含高浓度不凝组分蒸汽在立式螺旋槽管表面强制对流冷凝的传热机理。在不凝性组分体积百分浓度超过９０％时，螺旋槽管的强化传热效果不明显，而含量为４４％～９０％时，螺旋槽管总换热系数比光滑管提高２０％～３５％。     

Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.