金刚石微粉粒度不同检测方法的比较与研究

本文分析比较了不同型号激光粒度分析仪测量同一金刚石样品结果的差异。同时还比较了激光粒度仪与沉降管法对同一样品检测结果的差异。实验发现,由于不同型号的激光粒度分析仪设计原理、数据采集方式、算法不同,导致检测结果有所差别;另外,不同方法检测结果没有可比性。因此使用激光粒度分析仪检测粉状物料时,应注明所使用的仪器型号。该结论对超硬材料和磨料磨具行业微粉粒度组成检测有重要的参考价值。     

Fatigue crack growth resistance of SiC<Subscript>p</Subscript> reinforced Al alloys: Effects of particle size,particle volume fraction,and matrix strength

The main aim of this work was to study the effects of particle size, particle volume fraction, and matrix strength on the long fatigue crack growth resistance of two different grades of Al alloys (Al2124-T1 and Al6061-T1) reinforced with SiC particles. Basically, it was found that an increase in particle volume fraction and particle size increases the fatigue crack growth resistance at near threshold and Paris regimen, with matrix strength having a smaller effect. Near final failure, the stronger and more brittle composites are affected more by static modes of failure as the applied maximum stress intensity factor (K _max) approaches mode I plane strain fracture toughness (K _IC).     

Effect of particle morphology on flow characteristics of a composite plasma spray powder

The effects of BaF₂-CaF₂ particle morphology on National Aeronautics and Space Administration (NASA) PS304 feedstock powder flowability were investigated, BaF₂-CaF₂ eutectic powders were fabricated by comminution (producing an angular morphology) and by gas atomization (producing a spherical morphology). The fluoride powders were added incrementally to the other powder constituents of the NASA PS304 feedstock, (Ni-Cr, Cr₂O₃, and Ag powders). A linear relationship between flow time and concentration of the BaF₂-CaF₂ powder was found. The flow of the powder blend with spherical BaF₂-CaF₂ was better than that with angular BaF₂-CaF₂. The flowability of the powder blend with angular fluorides decreased linearly with increasing fluoride concentration. However, the flow of the powder blend with spherical fluorides was independent of fluoride concentration. The results suggest that for this material blend, particle morphology plays a significant role in flow behavior, offering potential methods to improve powder flowability and enhance the commercial potential. These findings may be applicable to other difficult-to-flow powders such as cohesive ceramics.     

Numerical modeling of in-flight characteristics of inconel 625 particles during high-velocity oxy-fuel thermal spraying

A computational fluid dynamics (CFD) model is developed to predict particle dynamic behavior in a high-velocity oxyfuel (HVOF) thermal spray gun in which premixed oxygen and propylene are burnt in a combustion chamber linked to a long, parallel-sided nozzle. The particle transport equations are solved in a Lagrangian manner and coupled with the two-dimensional, axisymmetric, steady state, chemically reacting, turbulent gas flow. Within the particle transport model, the total flow of the particle phase is modeled by tracking a small number of particles through the continuum gas flow, and each of these individual particles is tracked independently through the continuous phase. Three different combustion chamber designs were modeled, and the in-flight particle characteristics of Inconel were 625 studied. Results are presented to show the effect of process parameters, such as particle injection speed and location, total gas flow rate, fuel-to-oxygen gas ratio, and particle size on the particle dynamic behavior for a parallel-sided, 12 mm long combustion chamber. The results indicate that the momentum and heat transfer to particles are primarily influenced by total gas flow. The 12 mm long chamber can achieve an optimum performance for Inconel 625 powder particles ranging in diameter from 20 to 40 μm. At a particular spraying distance, an optimal size of particles is observed with respect to particle temperature. The effect of different combustion chamber dimensions on particle dynamics was also investigated. The results obtained for both a 22 mm long chamber and also one with a conical, converging design are compared with the baseline data for the 12 mm chamber.     

颗粒增强复合材料有限覆盖技术数值模拟研究

本文将有限覆盖技术应用于颗粒增强复合材料的数值模拟。通过引入数学与物重网格,将有限元的插值域与积分域分别定义在两个不同的覆盖上,即在数学网格上进行插值函数的构造,在物理网格上完成系统能量泛函的积分运算,最后通过覆盖权函数将二者联结在一起。它的优点是单元网格划分随意,不受复杂边界形状和二相材料界面的限制,单元可以是任意形状,是较之于有限元方法更普遍的数值模拟方法。最后给出了有限元网格覆盖颗粒增强复合材料的数值模拟算例,并与现有的方法进行了比较和讨论。     

采用有限元分析法量化不同中空玻璃边缘密封的热位移

间隔条和玻璃板片之间的相对热位移是中空玻璃边缘密封乃至中空玻璃(IGU)本身老化的主要原因之一.作者采用有限元分析法(FEA),建立了发生在大尺寸(1.5 m×2.1 m)的中空玻璃边缘密封的热位移与温差变化之间的模型,这是三种商业化的、不同材质的、不同设计的间隔条,在温度变化为-30～ 60℃范围内的模型.此模型是基于铝间隔条和镀锌钢间隔条与尼龙插角的搭配,不锈钢间隔条和弯曲插角的搭配.尼龙插角假定为实心的并稳固地固定于间隔条上;弯曲插角被建模成实心弯曲的金属插角,并同样稳固地固定于间隔条上.由于实际的弯曲插角是空心的,模型可能高估了这种转角设计的应力.正如预期那样,在低温时,插角会被向内拉,导致弯曲角度大于90°;在高温下,插角会被向外推,导致弯曲角度小于90°.通过检测发生在中空玻璃周边第一道密封的聚异丁烯密封胶厚度的变化,作者发现,到目前为止,不锈钢间隔条对于截面积的变化影响最小;铝制间隔条的影响最大.这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致.因此,热位移引起的第一道密封的有效扩散横截面变化,可以解释为何具有不同间隔条材料的中空玻璃之间的性能差异.     

纳米Pd修饰WO3电极及其催化析氢性能

将非晶结构Fe-W合金浸泡在0.5 mol/LH2SO4溶液中,在电极表面形成WO3层,厚度约720nm。通过化学法在半导体WO3上沉积金属Pd,扫描电镜和扫描隧道显微镜测试结果表明,沉积5m in后Pd的平均颗粒尺寸约为10 nm。在0.5 mol/LH2SO4溶液中的极化曲线测试结果表明,纳米Pd修饰WO3电极具有优异的电催化及光催化析氢活性,在500W碘钨灯照射下,电流密度为6 A/dm2时电极的析氢过电位减小30 mV以上。     

亚微米碳酸锰的制备及形貌控制

用硫酸锰和碳酸氢铵点接触反应法制备了亚微米级碳酸锰(MnCO3),分析了MnCO3的粒度和形貌控制.用透射电镜和粒度分析仪表征了实验结果.结果表明:由反应离子浓度决定的溶液过饱和度是影响MnCO3粒度和形貌的关键因素,当离子浓度比[CO32-]/[Mn2 ]在1～10范围内增大时,MnCO3粒度呈递减趋势;当[SO42-]/[Mn2 ]在l～6范围内增大时,MnCO3的结晶速度减慢,而且晶型由不规则型向立方型过渡.另外,较高的超声频率和较低的反应温度都有利于生成超细MnCO3沉淀.实验中获得了400～500nm的立方型MnCO3颗粒.     

水泥颗粒微观分维与宏观流动性关系的研究

将微观分维作为表征水泥颗粒的形态参数；用数字显微系统测算了5种水泥颗粒样品的微观分维，研究了水泥微观分维及其与粉体流动性指数的关系，结果表明：水泥粉体微观分维与其流动性指数呈线性负相关。     

尖晶石型铁酸镉纳米粉体的超声化学法合成

超声波辐射下前驱体法合成了纳米铁酸镉（CdFe2O4）粉末。以硝酸镉、硝酸铁和脲为原料用超声化学法制得前驱体，再在950℃焙烧15h，得到平均粒径约56nm的铁酸镉粉末。得到的纳米铁酸镉粉末用X射线衍射（XRD）、扫描电镜（SEM）、傅里叶转换红外光谱（FT—IR）进行表征并得到确认，用样品振动磁强计（VSM）对其磁学参数进行了测定。