Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks

By using the technology of the sequential interpenetrating polymer network, a series of novel damping materials based on a polydimethylsiloxane (PDMS)/polyacrylate (PAC) matrix with polymethacrylate (PMAC) were synthesized. They have a controllable broad transition peak spanning the temperature range of 150–220°C and the medial value of loss factor with maximum of 0.35–0.60. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) were applied to analyze and characterize the transition behavior and the microphase structure of the materials. It was found that the size and height of a transition peak at both the low‐ and the high‐temperature zones change as a function not only of the concentration of PMAC and PDMS but also of the kind of PMAC; simultaneously, the low‐ temperature behavior was also governed by the crystallization of PDMS. The content of the crosslinking agent exerts a significant influence on the configuration of the curves of the transition peaks. AFM shows a characteristic phase morphology of double‐phase continuity containing a transition layer and domain less than 1 μm, indicating that the interwoven multilayer networks are the key to incorporation of the immiscible components and form a broad damping functional region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 545–551, 2002     

���ƾۺ����ཬ���������Ե�;��

本文在肯定聚合物泥浆提高钻井速度的同时,也指出了该种泥浆在井内使用较长时间以后将会出现网架结构强、包被抑制性能减弱的弊病。为此,文中强调推出新的聚合物材料,研究泥浆中聚合物剩余浓度的测定方法及控制浓度的要领,提高固控效率净化泥浆等措施以解决之。     

Synthesis, structure and fluorescence properties of a highly stable indium(III)-2,5-pyridinedicarboxylate coordination polymer

The hydrothermal reaction of 2,5-pyridinedicarboxylic acid (H₂PDC), diethylene triamine and In(NO₃)₃·4.5H₂O gave rise to a two-dimensional (2D) coordination polymer In(OH)(2,5-PDC). This compound crystallizes in the orthorhombic space group Iba2, with cell parameters, a = 12.656(3) Å, b = 20.114(4) Å, c = 6.2216(1) Å, V = 1583.9(5) Å³ and Z = 8. Its structure contains one-dimensional In–O–In–O– chains, which are further linked by 2,5-PDC ligands into a 2D supramolecular neutral framework. The adjacent 2D layers are parallel with each other and construct a three-dimensional framework via hydrogen bands. At room temperature, the compound exhibits intense photoluminescence. On the basis of the results of TG/DTA analyses, the structure is thermally stable up to 390 °C.     

Binodal and spinodal curves: a simulation for various high polymer mixtures

Flory's equation-of-state theory has been used to predict the lower critical solution temperature behaviour of polymer—polymer mixtures. The spinodal phase boundary of numbers of high molecular weight polymer mixtures have been previously simulated using this theory. In this paper a procedure for simultaneous predictions of the binodal and the spinodal curves by equating the chemical potential of each component in the mixture is presented. The method is tested for five different mixtures. The effects of the binary and pure component state parameters on the simulated curves are discussed and the simulated phase diagrams are compared with the experimental cloud point curves. It is found that in most cases the results are more consistent with the cloud point curve being closer to the spinodal curve than the binodal.     

Liquid crystalline polymers as additives to enhance the device properties of low molecular mass liquid crystals

Magnetic and electric fields have been used to determine the splay (k₁₁) and bend (k₃₃) elastic constants in a series of polymer/monomer liquid crystal solutions using the well known Freedericksz transition technique. Measurements have been carried out as a function of concentration and temperature. The polymer used was a smectogenic polysiloxane side chain liquid crystal with both cyanobiphenyl and benzoate ester side groups. The monomeric solvent was the nematogen 4-n-pentyl-4′-cyanobiphenyl. All of the solutions studied were nematogenic up to a concentration of 40% w/w. It has been shown that k₁₁, k₃₃ and $\text{k}{}_{33}\text{k}{}_{11}$ all decrease with increasing polymer concentration and that at high enough concentrations $\text{k}{}_{33}\text{k}{}_{11}$ tends to become independent of temperature. The implications of these results are discussed in terms of the performance of the most common liquid crystal display, i.e. the twisted nematic device.     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

Linear viscoelastic properties of mixtures of 3- and 4-arm polybutadiene stars

The viscoelastic properties of a three-arm and a four-arm star polybutadiene with the same arm molecular weight (M_a) were studied. The zero-shear recoverable compliance (J⁰_e) and plateau modulus (G⁰_N) for these stars are the same. The zero-shear viscosity (η₀) of the three-arm star is 20% lower than that of the four-arm star. Mixtures of the stars had J⁰_e and G⁰_N unchanged. A $\text{50}\text{50}$ mixture of the three- and four-arm star was diluted with a low molecular weight linear polybutadiene. G⁰_N∝ø²; J⁰_e∝ø^?1 and M_e∝ø^?1, as expected for dilution with a θ-solvent.     

注聚井注入状况诊断方法研究

在室内试验和动态分析的基础上，对引起注聚井注入困难的原因进行了分析，提出了利用单井动态预测结果和实际注入动态曲线对比判断聚合物注入状况的方法，建立了预测注聚井注入动态的预测模型，并对数值模拟计算结果进行了分析。同时还评价了现场应用效果。通过数值模拟和实际注入动态曲线对比，可以初步判断待措施井有无近井地带堵塞，为提高注聚井压解堵措施的有效性奠定了基础。     

透湿膜的透湿机理与膜的研究概况

基于透湿膜的空气除湿是一种比较新颖的空气除湿方法。本文介绍了各种膜在空气除湿领域的应用情况，结合对膜制备工艺的简要介绍，侧重对原除湿原理，亲水性的高分子纤维素膜，凝胶膜和分子筛无机膜在空气除湿领域的研究和进展进行了分析。     

DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.