ESTIMATION OF VAPOR PRESSURES OF ORGANIC NITROGEN AND SULFUR COMPOUNDS BY A GROUP-CONTRIBUTION METHOD

The group-contribution method for vapor pressures of hydrocarbons and organic compounds containing nitrogen or sulfur, based on the kinetic theory of fluids, is revised and extended to include new groups containing nitrogen or sulfur. Good representation is obtained for vapor pressure data in the region 1.30-270 kPa. The method may be used to estimate vapor pressures and enthalpies of vaporization for those organic fluids containing nitrogen or sulfur, where no experimental data are available.     

化学清洗中不容忽视的步骤——钝化

对低压锅炉化学清洗中容易被忽视的“钝化”这一步骤，从理论上进行了探讨，并介绍了相应的钝化工艺及防腐措施     

Development of high‐definition aqueous polyvinylpyrrolidone photoresists for cathode ray tubes

Aqueous photoresists that are capable of higher resolutions than are currently employed by the cathode ray tube (CRT) industry were developed by combining photoactivators, which activate at shorter UV wavelengths with polyvinylpyrrolidone (PVP). Two photoactivators were synthesized: 4,4′‐diazido‐2,2′‐biphenyl disodium disulfonate (DABP), which has a maximum absorbance at 264 nm, and 4,4′‐diazido‐2,2′‐biphenylethane disodium disulfonate (DABPE), which has a maximum absorbance at 258 nm. The PVP/DABP and PVP/DABPE photoresists successfully imaged a pattern with resolution as small as 4.4 μm with photoactivator concentrations greater than 20% of the PVP concentration. Addition of silane and emulgen greatly improved the performance of the photoresists with more uniform coatings of thicknesses of up to 1.4 μm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1637–1644, 2006     

石墨防爆片静态变形及应力分析

本文旨在通过对石墨防爆片的变形、应力分布及爆破压力的试验研究,探讨以石墨电极为原材料加工石墨防爆片的可行性。文中运用有限单元法及薄板理论对该防爆破片的应力分布做了初步分析,并以电测和爆破试验验证了以薄板理论为基础的爆破压力计算公式,可供进一步研究时参考。     

成形压力对氧化铝瓷球性能的影响

本文以不同的压力等静压成形瓷球，研究了成形压力对瓷球烧结温度、密度及耐磨性的影响。结果表明：在本研究系统内随着压力的增加瓷球的烧结温度下降，烧成温度范围拓宽。采用150MPa成形的瓷球密度最大且耐磨性最好。     

Relationship of threshold diameter and Darcean permeability in unconsolidated porous structures

Experiment was conducted on the threshold pressure for atmospheric air through unconsolidated narrow size distributed mini sphere and sand particles at low flow rates. The threshold diameter calculated from measured threshold pressure showed that it does not follow the traditional similarity theory. This is consistent with our experiment on accurate permeability measurement, and can be explained as a result of gas slip flow within such micro pore structure. Our current work tend to find the method to predict the permeability-threshold pressure relationship for unconsolidated porous structures.     

Solid phase compaction of polymeric powders: effects of compaction conditions on pressure and density variations

In a recent communication it was shown that the pressure losses during the solid phase compaction of a polymeric powder could be predicted from a simple relationship of the form:

$\text{P}{}_2\text{P}{}_1\text{=(K)}{}^{\mathrm{<mtext>h</mtext><mtext>d</mtext>}}$

where $\text{h}\text{D}$ is a function of the geometry of the compact. This has now been explored in more detail and it has been found that for PVdC and PVC the factor K is dependent on the rate of compaction and the die surface finish but is independent of compaction pressure and die diameter. To illustrate the effect of the pressure losses on the structural uniformity of the compacts, microhardness measurements were taken at a large number of points across a section of each sample. A computer plot of hardness contours provided a picture of the homogeneity of the sample which could be related to the compaction conditions and average density of the compact.     

In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

FORMATION AND FLOW OF GAS BUBBLES IN A PRESSURIZED BUBBLE COLUMN WITH A SINGLE ORIFICE OR NOZZLE GAS DISTRIBUTOR

The characteristics of gas bubbles in a 5 cm diameter bubble column equipped with a single orifice of 1,3 or 5 mm diameter were investigated under system pressure of 0.1-15 MPa. The formation of gas bubbles was strongly affected by the system pressure. Under high pressures a dispersed gas jet was formed at gas velocities where spherical gas bubbles would have been formed at atmospheric pressure. The critical gas velocity between the bubbling regime and the jetting regime was correlated with the liquid phase Weber number and the gas phase Reynolds number based on the gas velocity at the orifice. Bubble size and gas holdup in the main part of the bubble column were also affected by the bubble formation pattern at the distributor     

换热器管板厚度的快速计算

在化工生产中，换热器设备是应用最广泛的一种设备，且占主导地位。而在换热器设计过程中，管板厚度设计计算比较复杂。本文的特点是在满足GB151—1999《管壳式换热器》标准要求的前提下，介绍一种快速简便估算管板厚度的计算公式，从而达到快速确定管板厚度的目的。