稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。     

退火损伤对Er注入GaAs和Yb注入InP发光的影响

本文报道了CaAs∶Er、InP∶Yb发光样品的二次离子质谱、X-射线双晶衍射测量结果及其与Er离子的表面成份的关系.分析讨论了退火损伤对GaAs∶Er和InP∶Yb发光的影响以及Er~(3+)复合体发光中心模型.     

Volatile organo-halogen trace analysis in beverages by thin-layer headspace enrichment and electron-capture gas-chromatography

Applicability of thin-layer headspace (TLHS) procedure giving an aqueous concentrate and also classical purge and trap (PT) in off-line mode to isolate and enrich volatile organohalogen compounds in common beverages was tested. Both enrichment tech-niques were used in combination with gas chromatography – electron capture detection (GC-ECD). TLHS, combined with direct aqueous injection (DAI)-GC-ECD, proved applicable in the determination of volatile organohalogen compounds in all studied beverages, while the PT in a version with no preliminary sample pre-treatment was of limited applicability. Detection limits of the TLHS-based procedure were in the order of 1 ppt. Content of volatile organohalogen compounds in a number of beverages available on the Polish market including mineral waters, beers, juices, carbonated and non-carbonated soft drinks, etc. was determined by means of TLHS-DAI-GC-ECD.     

Experimental and mathematical studies of natural convection for solid-salt dissolution in water

The phenomena of natural convection caused by a concentration gradient usually creates currents as a result of buoyancy forces. These forces are formed from the combined effect of a fluid density gradient and the body force (gravitational force). The above phenomenon was studied experimentally in a circular glass column of 0.08 m diameter and 1 m length. This column was erected vertically and filled with distilled water with a salt bag placed on top of it and partially immersed in water. The dissolution mechanism was then modelled and a finite difference method was used to solve the formulated equations by using the implicit scheme of MacCormack (Anderson et al., 1984). The experimental results and the numerical predictions are represented graphically and give compatible agreement.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

黄埔发电厂#6发电机转冷水系统改造

黄埔发电厂#6发电机转冷水铜离子含量超标，通过对缺陷原因进行分析，针对二级水封的特性对溢出的转冷水进行回收并利用化学凝结水处理去除溶出的铜离子，通过控制转冷水的pH值最终减缓铜管的腐蚀.     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.