High quality gate dielectrics formed by rapid thermal chemical vapor deposition of silane and nitrous oxide

In the present study, we have performed electrical characterization of oxides deposited via rapid thermal chemical vapor deposition using SiH₄ and N₂O. We have investigated the effect of temperature, pressure, and SiH₄ to N₂O ratio on the electrical and material properties of as-deposited films. We have found that as-deposited oxides deposited at low temperatures, low pressures, and with a low silane to nitrous oxide ratio of ～0.5% give good material and electrical properties. The as-deposited films are stoichiometric in nature and have high deposition rates. As-deposited films had very low D_it values, high breakdown fields, and excellent subthreshold swing. The leakage currents and metal oxide semiconductor field effect transistor current drive, although lower than thermal oxides, were found to be quite acceptable. We have also investigated the thickness dependence of the films and found that as the film thickness is reduced below 50Å, the reliability improves for all oxides including the silicon-rich deposited oxides.     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

零部件通用对企业竞争战略的影响

零部件通用是目前研究的一个热点问题,但是绝大多数文章都是针对零部件通用对库存水平的影响。本文从战略的角度,分析了零部件通用对企业竞争战略的影响,发现它不仅对降低费用有着积极的影响,而且对缩短新产品开发周期、制造过程重组等方面也有着积极的作用。因此,零部件的通用性已经从战术上的节约费用上升为战略上的竞争武器。     

Development and implementation of a NURBS curve motion interpolator

This paper deals with the issues of development and implementation of a real-time NURBS interpolator for a six-axis robot. Using an open-architecture controller system as a testbed, a real-time NURBS curve interpolator was developed, implemented and tested. Sample runs were conducted with the resulting trajectories measured in real-time during robot motion. The resulting trajectories are analyzed, discussed and compared with those from a commonly used point-to-point approximation technique. The real-time NURBS curve interpolator's feasibility, advantages and related issues are also discussed.     

金属快速凝固方法的数学模型

本文综述了与几种典型的快速凝固方法相应的数学模型，并对每种模型作了相应的分析和评价。文中重点介绍了“活塞－砧法”，“双辊法”，“单辊法”和“雾化沉积法”数学模型的理论基础，建模过程，理论优缺点及实用局限性。     

重油催化裂化反应技术的新进展

近十几年来，重油催化裂化技术作为主要的重质油轻质化手段得到了迅速发展，国内外围绕催化裂化装置的提升管反应器也开发了许多新技术。综述了重油催化裂化反应技术的新进展，并对新技术的开发进行了讨论。     

微机械谐振器的快速测试方法

为了缩短微机械谐振器的测量时间,提高测量效率.提出了一种针对压阻检测的微谐振器的频率特性测试新方法,该方法利用欧姆鉴相器,积分器和微处理器实现对微弱信号的有效检测.欧姆鉴相器以检测电阻为鉴相器,利用欧姆定律实现参考信号和被测信号的乘法鉴相运算;通过积分器实现对鉴相结果的积分运算,抑制干扰和噪声;微处理器用于对积分数据的...     

Semi-automated user agents in distributed change management

Flexible integration of distributed design and manufacturing activities is one of the key issues in applying just-in-time principles along the logistics chain. The potential of AI based approaches in this field is clear, but the inherent asynchrony, concurrency, and inconsistency of distributed operations has reduced enthusiasm so far.This paper discusses coordination in the context of geographically distributed manufacturing of one-of-a-kind products. Cooperation of partners is based on semi-automated user agents which operate as an integrative layer between more dedicated tools and systems. The management of order changes in elevator manufacture is used as a case example.The work reported here is part of the DIMUN project (DIMUN, 1989) in the RACE program.     

New Paradigm of Data-Driven Smart Customisation through Digital Twin

Big data is one of the most important resources for the promotion of smart customisation. With access to data from multiple sources, manufacturers can provide on-demand and customised products. However, existing research of smart customisation has focused on data generated from the physical world, not virtual models. As physical data is constrained by what has already occurred, it is limited in the identification of new areas to improve customer satisfaction. A new technology called digital twin aims to achieve this integration of physical and virtual entities. Incorporation of digital twin into the paradigm of existing data-driven smart customisation will make the process more responsive, adaptable and predictive. This paper presents a new framework of data-driven smart customisation augmented by digital twin. The new framework aims to facilitate improved collaboration of all stakeholders in the customisation process. A case study of the elevator industry illustrates the efficacy of the proposed framework.