精密钢球环槽等速传动机构运动精度及可靠性分析

在分析精密钢球环槽等速传动机构结构基础上,利用其等效机构和误差分析理论,研究了钢球环槽等速传动机构结构参数对其机构传动精度的影响规律,应用机构可靠性理论,建立了钢球环槽等速传动机构的运动精度可靠性模型,并研究分析了机构的运动精度可靠性,研究结果为精密钢球行星传动的设计和应用提供了理论依据。     

撞击构造的特征及对贵州息烽县环形构造的成因解释

对行星的撞击构造特征进行了总结。地球上的撞击构造,一般通过地貌以及冲击变质产生的岩石和矿物来确认。对贵州省息烽县境内的疑似撞击构造的环形构造进行了比较研究,通过对已有地质资料的详细调研、实地仔细的勘测和采样以及对样品的岩相学分析,并未观察到冲击变质特征,因此认为此处环形构造并非撞击成因,而是古老的盆状向斜经历了多期的构造作用形成的涡旋构造。     

Design of Multi-band Small Antenna Based on Single Split-Ring Resonator

To use the single split-ring resonator(SRR)as a basic unit cell for small antenna with multi-band frequency response is proposed.The structure of antenna is consisted of a single spilt-ring resonator and a coupled microstrip line.The designed antenna is numerically optimized with CST Microwave Studio.The radiation properties of the antenna show that there are three frequency bands among which two bands are 1.3 GHz and 2.1 GHz ultra-wideband(UWB),respectively,where S11 is less than-10 dB.The gain at every fr...     

适用于宽带接收阵列的无模糊二维DOA估计

为了满足宽带侦收的要求,提出了一种新的基于环形阵列的宽带天线阵列配置方案,利用2组独立空间欠采样通道得到有模糊的信号空域信息,并结合一定的解模糊算法和配对方法得到无模糊的空间信号到达角(DOA)估计. 仿真结果表明,所提算法在搜索量小的优势下能实现二维方向角的高精度估计及正确配对,且2组通道的采样数据可并行处理,增强了算法的实时性.     

基于多项式拟合的CT图像环状伪影校正

探测器探元的响应不一致性会使CT图像中出现环状伪影,环状伪影是影响CT图像像质的重要因素,影响图像的分析及后续处理。为此提出一种基于分段多项式拟合的环状伪影校正方法,该方法适用于单材质或图像中的材质衰减系数相差不大的情况。采用分段多项式拟合正弦图累加曲线得到修正因子,用修正因子修正不一致的探元,最后重建图像。实验结果证明此方法能有效抑制图像正中间部分环状伪影。     

钢管混凝土梁柱节点受力性能有限元分析

采用大型有限元分析软件ANSYS,对深圳福田大型地下车站主体结构标准段的钢管混凝土柱顶-横纵梁、柱脚-底纵梁以及柱-地下1层梁等节点在梁端及柱端的弯矩、剪力和轴力等荷载作用下的力学性能进行模拟和分析.从钢管混凝土梁柱节点的受力状态出发,分析在梁端及柱端的弯矩、轴力和剪力等荷载作用下节点模型各组成构件(包括柱钢管、梁、加强环梁、承台、抗拔桩等部位)的主应力及切应力分布情况、变形情况和各个截面的内力分布情况等,与各个构件所对应的设计强度值进行对比分析,根据分析结果建议了更合理的节点结构设计与加固方案.     

Study on the characteristics of erbium-doped waveguide ring laser

A theoretical model of the erbium-doped waveguide ring laser is established according to the theory of erbium-doped waveguide amplifier and the transmission matrix of waveguide directional coupler. The influence of bend radius, coupling coefficient and doped erbium ion concentration on the characteristics of waveguide ring laser is investigated. It is shown that due to the co-action of waveguide bend loss and other relevant loss there is an optimal bend radius which can provide simultaneously low threshold pumping power and high laser light output power. As one part of the resonator’s loss, the laser light coupling coefficient of directional coupler has an impact on the laser property. The analysis indicates that the laser achieves the high output power when the coupling coefficient is about 0.2. The threshold pumping power is the minimum when the doped erbium ion concentration is 0.85×10²⁶ m⁻³. Increasing the concentration of doped erbium ions will enhance the output power of laser light as long as the concentration doesn’t introduce remarkable up-conversion effect. The results give a good theoretical basis for the design and fabrication of erbium-doped waveguide ring laser devices. Supported by the National Natural Science Foundation of China (Grant No. 60807015), the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 200801411037), the Young Teacher Cultivation Foundation of Dalian University of Technology (Grant No. 893210) and Doctor Start-up Foundation of Dalian University of Technology (Grant No. 893322)     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

土壤水分传感器实验室标定和测试方法探讨

通过在实验室制作标准试样(土壤)标定及测试土壤水分传感器,研究土壤水分传感器在实验室标定及测试的步骤和方法,探讨土壤水分传感器实验室环境下率定关系式的建立,提高土壤水分传感器在实验室环境下数据测试的准确性和权威性,在于探讨土壤水分传感器实验室标定和测试方法,为土壤水分传感器的实验室检测提供方法支撑。