应用改进BP网络对潼关高程的预测

作者在分析了影响汛前和汛后潼关高程变化值的因素的基础上，利用改进BP网络模型对非特征汛期和汛期潼关高程的变化值进行了计算。计算中不采用潼关的绝对高程，而用高程的变化量作为网络的较出物正量，从而减少计算误差，同时又能客观地考虑各影响因子的作用。改进后的BP模型学习时间短，精度满足要求。用该模型计算的潼关高程变化趋势与实际水库调度运行中的高程基本吻合。     

辽河防洪应急工程中的加筋粉细砂筑坝技术

加筋粉细砂筑坝是一门新兴技术,通过在辽河防洪应急工程右岸李家堡段应用表明,该项技术在技术上是可行的、在经济上是合理的。本文介绍了该技术在辽河防洪应急工程右岸李家堡段的应用。     

Expanding the analytical potential of channel locational probability maps using cellular statistics

The planimetric shifts in channel location of large alluvial rivers are a critical component in the creation of diverse structures and functions in riverine habitats. Engineered management schemes must also compensate for this type of channel change to protect resources and maintain navigation channels. The stability of the Lower Mississippi River channel was assessed through an analysis of historical records of channel position produced and archived by the United States Army Corps of Engineers. Channel location was recorded for the years 1765, 1820, 1881, 1915, 1930, 1937, 1960 and 1970. Channel stability was measured by two introduced metrics on a cell‐by‐cell basis: (1) the standard deviation of Euclidean distance to a channel cell for the entire period of record, and (2) the rate of Euclidean distance change between years in the period of record. At a coarse spatial scale, channel instability increased in the downstream direction. The variability of channel stability also increased in the downstream direction. Analysis of this variability identified alternating areas of high and low stability occurring with greater frequency as distance downstream increased. These findings are validated by past studies of channel stability along the Lower Mississippi River. As a result, the proposed metrics provide a consistent, quantitative, efficient and cost‐effective means of identifying areas of channel instability at several spatial scales. Copyright © 2006 John Wiley & Sons, Ltd.     

High resistivity measurement of SiC wafers using different techniques

To establish fast, nondestructive, and inexpensive methods for resistivity measurements of SiC wafers, different resistivity-measurement techniques were tested for characterization of semi-insulating SiC wafers, namely, the four-point probe method with removable graphite contacts, the van der Pauw method with annealed metal and diffused contacts, the current-voltage (I-V) technique, and the contactless resistivity-measurement method. Comparison of different techniques is presented. The resistivity values of the semi-insulating SiC wafer measured using different techniques agree fairly well. As a result, application of removable graphite contacts is proposed for fast and nondestructive resistivity measurement of SiC wafers using the four-point probe method. High-temperature van der Pauw and room-temperature Hall characterization for the tested semi-insulating SiC wafer was also obtained and reported in this work.     

电力系统谐波检测的现状与发展

准确、实时地对电力系统谐波进行检测有着重要的意义。本文根据电力系统谐波测量的基本方法，对近年来电力系统谐波检测的新方法进行了分析和评述。最后对电力系统的谐波测量进行了总结并提出了看法。     

地杂波O．94μm激光后向反射率测试研究

通过对地杂波O．94μm激光后向反射率的测试，获取不同入射角的多背景后向反射率测试数据。通过对测试数据的分析处理提供特征信息，为激光探浏器设计提供依据。     

Design Methodology and Area Sensitivity Analysis of Horizontal Subsurface Flow Constructed Wetlands

An approach is presented to satisfy the demand for simple criteria, guidelines and models for the preliminary sizing of horizontal subsurface flow (SF) constructed wetland systems. This approach eliminates time-consuming calculations and iterations by providing graphical solutions for wetland system sizing. Therefore, it can be used for the preliminary assessment of new or performance evaluation of existing subsurface flow constructed wetland systems. The validity of this methodology is checked with data from existing systems and is found to be quite satisfactory. This methodology is combined with simple equations predicting the maximum wetland capacity in summer, so as to assist designers in sizing installations in tourist areas with increased summer populations. Furthermore, based on this methodology, a sensitivity analysis is performed of the area requirements for wastewaters of various strengths and various design conditions and performance criteria. The results provide a useful overview to engineers and further simplify the design methodology of new subsurface flow constructed wetland systems.     

结构化编程实现Sniffer

随着各高校校园网络规模的不断扩大和各种应用的急剧增加,各种新的网络问题也在不断出现。Sniffer是网络管理员进行网络管理的有效工具,可以有效地对网络进行实时监控,及时发现网络中存在的各种问题。本文首先介绍了Sniffer的工作原理,其次给出了实现Sniffer功能的编程流程图,并用C语言给出了编程所需的关键代码。     

工业管道测厚的几点问题探讨

超声波测厚在腐蚀监测上应用越来越广泛,为让这项检测技术更准确、更可靠,充分发挥功效,文章就工业管道测厚中测厚数据处理、测厚点选择、高温问题以及其它影响因素等几个方面进行了探讨。     

柴油加氢装置设计和改造问题探讨

论述了产品质量指标的不确定性和产品质量指标越来越严格的趋势,认为柴油加氢新装置设计和老装置改造设计中,确定产品质量指标并根据此指标进行设计是非常必要的;新装置设计应考虑反应部分一步设计、分步实施的可行性,留有进一步脱芳烃和改质的余地;对老装置改造设计应根据其压力等级确定产品的质量目标.介绍了柴油加氢装置的典型流程、工艺流程的特点,对各加工方案工艺流程的选择原则、装置的设计要点进行了探讨.