土层地基上建筑结构混合控制的减震效率

研究土 -结构相互作用对结构混合控制减震效能的影响。首先建立了土层地基上结构混合控制的运动方程 ,通过不同输入地震波、不同土层剪切波速、不同结构参数等条件下的数值分析 ,讨论了桩基础对结构混合控制减震效率的影响规律。数值结果表明 :对于土 -结构相互作用体系 ,采用混合控制的减震效率明显要强于单一的 TL D的减震效率 ;在土层较为坚硬的情况下 ,混合控制仍具有较高减震效能 ;随着土层变软 ,土 -结构相互作用减小结构地震反应的效应趋于明显 ,混合控制的减震效率明显降低 ,因此 ,对软土地基上的结构实施混合控制时 ,必须先要正确分析土 -结构体系的地震反应。     

Two Modified Semicircle Control Charts for Detecting Process Improvement

A semicircle control chart can be used in detecting both increases and decreases in the mean and/or variance. In this paper, we propose two modified semicircle charts for detecting a reduction in the process variance, a.k.a. process improvement. Each of these modified semicircle charts, namely, SC1 and SC2 has two limits, defined by the inner and outer semicircles. A process improvement is detected by the SC1 scheme if a point is plotted inside the smallest semicircle, or if two successive points are plotted between the inner and outer semicircles and by the SC2 scheme if a point plots inside the smallest semicircle or if two of three successive points plot between the inner and outer semicircles. It will be shown that the two modified semicircle charts have superior average run length (ARL) performances to the basic semicircle chart in the detection of process improvement. The ARL study is conducted by means of a simulation.     

Iterative ultrasonic signal and image deconvolution for estimation of the complex medium response

The ill‐conditioned inverse problem of estimating ultrasonic medium responses by deconvolution of RF signals is investigated. The primary difference between the proposed method and others is that the medium response function is assumed to be complex‐valued rather than restricted to being real‐valued. Derived from the complex medium model, complex Wiener filtering is presented, and a Hilbert transform related limitation to inverse filtering type methods is discussed. We introduce a nonparametric iterative algorithm, the least squares method with point count regularization (LSPC). The algorithm is successfully applied to simulated and experimental data and demonstrates the capability of recovering both the real and imaginary parts of the medium response. The simulation results indicate that the LSPC method can outperform Wiener filters and improve the resolution of the ultrasound system by factors as high as 3.7. Experimental results using a single element transducer and a conventional medical ultrasound system with a linear array transducer show that despite the errors in pulse estimation and the noise in the RF signals, excellent results can be obtained, demonstrating the stability and robustness of the algorithm. © 2006 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 266–277, 2005     

二阶柯西中值定理中间点的渐近性质

对二阶柯西中值定理中间点的渐近性质进行了研究，得到的主要结果是limx→αξ-α/x-α=1/2m√2^m 2-2/(m 2)(m 1).     

一种大尺寸直角尺的精度检测与修复方法

介绍了工厂对大尺寸直角尺精度检测与修复常用的在平台上三直角尺两两互检的方法与原理。在确定直角尺误差时，该方法的缺点是需要逻辑推理，较难掌握，功效较低。为此，提出建立一个数学模型，用解数学方程的方法来代替逻辑推理，确定直角尺的误差。     

新型无机闪烁体CeF3的时间特性研究

CeF3是新型快响应无机闪烁体．对近年国内研制的CeF3无机闪烁体的时间特性进行了研究，包括脉冲辐射诊断所关心的CeF3对快脉冲γ辐射源的时间响应．如上升时间、半高竟、脉冲后沿；同时推算并使用了用脉冲法获得晶体发光衰减常数的简单估算公式，获得的CeF3衰减常数值与国外研究同行其它测量方法得到的结果基本一致。     

基于随机有限元的梁单元反应变异性分析

针对工程中由于不确定因素的影响而导致的结构反应的变异,利用随机有限元推导了在多个随机变量作用下梁单元结构反应变异的公式,以镗刀杆工作的位移变异为例,详细地介绍了其计算过程,并将其与解析法和Monte-Carlo法进行了对比,分析了各自的适用范围,为不确定性结构的可靠性分析奠定了基础。     

多用户检测技术的发展与应用

CDMA系统是一个自干扰系统，多址干扰是限制其容量和性能的主要原因之一，传统的相干接收机不能从根本上解决消除多址干扰的问题，因此如何抑制多址干扰引起了通信界学者们的关注．多用户检测技术能从根本上消除多址干扰，提高系统的性能。文中主要介绍了多用户检测的思想和检测器的分类，以及衡量多用户检测器性能的三个重要指标，还阐述了多用户检测技术的新发展和该技术在几个具体系统中的应用。     

An Accelerated Iterative Method for Simultaneously Determining All Roots of Polynomial Equation

In this paper, an accelerated iteration method for simultaneously determining of a polynomial equation's roots is proposed. The new method is an improvement of modified Newton method. At the same time, convergence properties and the order of convergence rate are discussed. At last, some numerical results are reported and listed.     

高速采样示波器中的时基失真及其估计

介绍了时基失真的概念及产生原理。改进了美国NIST提出的时基失真的数学模型，据此模型仿真出时基失真的数据，进而仿真出测量数据。给出了为估计采样示波器的时基失真所采取的方法——最小二乘法。这种方法需要在多相位、多频率上测量信号，可以精确地估计谐波模型的阶数。最后介绍了如何根据已经得到的估计值来修正时基失真。