声表面波可程序抽头延迟线研究

报道声表面波可程序抽头延迟线的研制情况。对该器件的总体结构，电路原理框图、声表面波可程序抽头延迟线结构作了一个扼要的概念。同时分别报道了我所研制的各类声表面波可程序抽头延迟线器件性能指标及相应的图片说明，最后对该器件仍存在的一些问题作了探讨。     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.     

Structure of carbon nanotubes probed by local and global probes

A review is proposed of different techniques available today for the characterization of the atomic structure of carbon nanotubes. This review covers the electron microscopies, various diffraction techniques, scanning probe microscopies, and optical spectroscopies, including Raman scattering. The advantages and limitations of the characterization techniques are discussed.     

SEM observation of the “orange peel effect” of materials

This study investigated the peculiar “orange peel” effect often observed in nanomaterials using high-resolution scanning electron microscopes. The study used different materials, including semiconductor thin films and ceramic nanoparticles. The investigation established that the “orange peel” is of an artifact caused by the metallic coating of the samples in sample preparation. This discovery is important in eliminating the misinterpretation of such effect on the true surface feature of materials, hence avoiding the confusion in the discussion of the properties of nanomaterials.     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

Thick bone section preparation using a silicon-rubber-based sealant

A method has been developed, using a silicon-rubber-based sealant, which allows 2–3-mm-thick specimens to be maintained in a protected fluid environment for a number of months, without risk of dehydration. Following this, the specimen can be retrieved, stained, embedded and sectioned further. For example, 2-mm-thick sections of fixed unstained bone are easily examined by means of epi-illuminated polarized light and fluorescence microscopies using either conventional or confocal optics. The method could easily be extended to other tissues, for example brain tissue.     

差分扩频技术在移动水声通信中的应用

提出了基于差分相干解调法的DS/BDPSK水声通信技术,在接收端采用差分相干解调的方法,解决了在水声通信中载波估计较难的问题,可克服传输过程中由于载波漂移产生的频率和相位误差.通过计算机仿真研究、湖试试验,验证了该系统在复杂的水声信道中具有较强的抗多径能力、抗多普勒能力,能实现低误码率通信,具有较好的有效性和鲁棒性.     

一种新的纸基微流开关及其活跃方法

提出了一种新的、基于声表面波的纸基微流开关。通过软光刻技术制作内含两个微孔的聚二甲基硅氧烷(PDMS)微架,其上固定经折叠、长度可变的纸通道。PDMS微架贴附于压电基片之上,并在待连接的两微通道之下方,折叠纸通道最低端离压电基片间距为2 mm。压电基片上采用微电子工艺光刻一对叉指换能器和反射栅。当足够强度的电信号加到叉指换能器对时,激发两相向声表面波,使得压电基片上微流体输运到折叠纸通道,改变其长度,连接其上待连通的两纸基微通道,完成开关功能。对可编程微流器件提供了一种新的编程和开关控制方法。     

Parametric 3D modeling of young women's lower bodies based on shape classification

Three-dimensional (3D) human body modeling is an important research direction in the field of clothing virtual design. On the basis of 3D human body scanning, this paper studied a method to build a 3D parametric lower body model according to body classification. The research includes three main parts. (1) Anthropometry and body shape classification. We randomly selected 333 young women ages 18–25 years old in Northeast China as the experimental sample. Then we divided the lower body shape into three categories using principal component analysis and K-means clustering. (2) Determination of feature cross sections and points, and reconstruction of feature curves. According to the average values of each body type, we obtained the mean reference body by Euclidean distance method. We determined feature cross sections and points, and extracted the 3D coordinates of the feature points of the mean reference body to reconstruct the feature curves. (3) The surface lofting and establishment of parametric 3D lower body model. According to the shape characteristics of the lower body, we constructed the guiding lines for the crotch and lower limbs, and established parametric lower body models for three body types.Relevance to industry3D human modeling is an important part of garment industry digitization. This research provides an effective way to construct a parametric 3D lower body model. The method offers a reference for the parametric virtual human modeling and virtual fitting of trousers.