Isocyanate-rich cellulose nanocrystals and their selective insertion in elastomeric polyurethane

Cellulose nanocrystals (CNC) were successfully obtained and modified with 1,6-hexamethylene diisocyanate (HDI) by means of in situ polymerization varying the CNC/HDI molar ratio to evaluate the number of anchored chains to the CNC. The modification was examined by elemental analysis, nuclear magnetic resonance (¹³C NMR) and attenuated total reflection Fourier transform infrared spectroscopy (IR-ATR). Nanocomposites containing 1.5 wt% CNC, modified and unmodified, were prepared by solvent casting. Thermal and mechanical properties of the resulting films were evaluated from the viewpoint of polyurethane microphase separated structure, soft and hard domains. CNC were effectively dispersed in the polyurethane matrix and depending on surface chemistry, the nanoreinforcement interacts selectively with matrix nanodomains. This interpretation is supported by differences in thermal and mechanical properties of the nanocomposites and also confirmed by AFM images. Isocyanate rich cellulose nanocrystals interacted with matrix hard phase, promoting physical association with hard segments, enhancing stiffness and dimensional stability versus temperature of the nanocomposite.     

Quantitative measurement of cementite dissociation in drawn pearlitic steel

Fractional dissociation of cementite was quantified as a function of strain by measuring the volume change of cementite in the pearlitic steel. The amount of carbon dissolved into the ferrite was estimated from the decrease of cementite volume, to correlate with the hardness in different strain level. The hardness showed linear relationship with the carbon dissolved into the ferrite matrix, which is believed to contribute in strengthening the drawn wire. Defects introduced from the deformation were believed to lower the energy barrier of cementite break-ups and to enhance the dissolution of carbon into ferrite.     

Grain boundary microstructure and fatigue crack growth in Allvac 718Plus superalloy

The correlation between grain boundary microstructure and fatigue crack growth with hold-times was investigated for two conditions of the superalloy Allvac 718Plus; a Standard condition with the recommended distribution of grain boundary phases and a Clean condition with virtually no grain boundary phases. Fatigue testing was performed at 704 °C using 10 Hz cyclic load with intermittent hold-times of 100 s at maximum tensile load. Microstructural characterization and fractography were conducted using scanning- and transmission electron microscopy techniques. Auger electron- and X-ray photoelectron spectroscopy techniques were used for oxide analyses on fracture surfaces. It was found that in the Standard condition crack growth is mostly transgranular for 10 Hz loading and intergranular for hold-times, while for the Clean condition crack growth is intergranular in both load modes. The lower hold-time crack growth rates in the Standard condition are attributed to grain boundary δ-phase precipitates. No effect of δ-phase was observed for 10 Hz cyclic loading crack growth rates. Two different types of oxides and oxide colours were found on the fracture surfaces in the Standard condition and could be correlated to the different loading modes. For cyclic loading a bright thin Cr-enriched oxide was dominate and for hold-times a dark and slightly thicker Nb-enriched oxide was dominant These oxide types could be related to the oxidation of δ-phase and the matrix respectively. The influence of δ-phase precipitates on crack propagation is discussed.     

Study on electrothermally actuated cantilever array for nanolithography

Nanolithography is a patterning technique for the fabrication of nano-scale structures.A promising method of nanolithography known as scanning probe lithography has particularly extensive applications for its high resolution,high reliability,and simple operation.In this paper,a novel electrothermally actuated cantilever with integrated heater,thermal conductor and actuator for scanning probe lithography is proposed.Cantilevers are designed in an 8×4 array.Analytical models are presented to simulate the temp...     

Molecular recognition of DNA–protein complexes: A straightforward method combining scanning force and fluorescence microscopy

Combining scanning force and fluorescent microscopy allows simultaneous identification of labeled biomolecules and analysis of their nanometer level architectural arrangement. Fluorescent polystyrene nano-spheres were used as reliable objects for alignment of optical and topographic images. This allowed the precise localization of different fluorescence particles within complex molecular assemblies whose structure was mapped in nanometer detail topography. Our experiments reveal the versatility of this method for analysis of proteins and protein–DNA complexes.     

8279集成芯片在铝电解智能槽控机上的应用

8279芯片是专用数码显示器接口芯片,能对显示器自动扫描,并大大减轻CPU的负担。因此,在单片机应用系统中,获得了广泛的应用。主要阐述了8279芯片的主要结构、原理以及在铝电解智能槽控机的硬件组成、应用软件上的初始化、软件构成。     

Immunochemical or fluorescent labeling of vesicular subcellular fractions for microscopy imaging

We describe a procedure for the labeling of membranous vesicular purified subcellular fractions, to image them, typically by confocal laser scanning microscopy. Being intracellular organelles, these fractions, once purified cannot be attached to glass slides as for cells. Fractions are labeled “in batch” without prior embedding or freezing. Each labeling step performed by passages of resuspension/centrifugation is followed by washings. Then samples are dispersed on the glass slides. Mammalian retinal rod outer segment disks, intact brain stem myelin vesicles, and brain synaptosomes were chosen, as these subcellular fractions can be purified by well established procedures. These fractions were immunolabeled with specific antibodies. Moreover, by the earlier procedure, we show that the mitochondrial vital membrane potential probe MitoTracker Deep Red 633 stains myelin vesicles and rod disks before fixation, consistently with our previous reports of a respiring capacity of these membranes. Therefore, the technique seems adequate to become an instrument to study the structure and the function of these and other subcellular fractions. Microsc. Res. Tech. 73:1086–1090, 2010. © 2010 Wiley‐Liss, Inc.     

金属卤化物灯电子镇流器研究

:本文提出了一种在高频下工作的金属卤化物灯电子镇流器,分析了其电路组成及工作原理,由于高频开关管实现了零电压通断,提高了工作效率;利用纹波电压作为调制信号对灯电流进行频率和幅值调制,避免了声共振的发生;采用扫频谐振方式产生高压触发脉冲,触发可靠;与传统低频方波工作方式相比,结构简单、所用器件少、效率高、可靠性高.实验结果验证了该方案是可行的.