Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.     

声参数的高性能混凝土强度推定模型

为研究高性能混凝土的声波传播特性及实现其强度的快速、准确、无损检测,基于超声波检测方法,应用嫩江、多宝山附近的沙石料,对高性能混凝土对声波的扩散性及其抗压性能与声参量之间的模型关系进行了研究.建立了高性能混凝土抗压强度与声速之间的多种数学模型.通过实测检测数据进行验证,满足精度要求.高性能混凝土的非均质性降低,其抗压强度与声速相关性较好,用超声的方法完全可以实现强度的快速推定.同时,也为将来高性能混凝土地区强度推定曲线的建立奠定了研究基础.     

多途信道中声屏蔽及声聚焦

针对传统阵处理无法分辨同一方向上2个点源的缺陷,提出了多途信道中声屏蔽技术.将声屏蔽技术应用于抗拖船干扰,把拖曳线列阵接收的拖船干扰和同方向的目标信号在频域通过一个屏蔽、聚焦权滤波器,在对干扰屏蔽的同时,对目标聚焦.仿真结果表明,干扰源的辐射噪声被显著抑制,而所期望的目标信号清晰可见,其输出相干信噪比大幅度提高,该技术在抑制拖船干扰的同时可以有效消除在该方向的探测盲区.     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

求解声波动方程的隐格式有限体积法

为研究声传播问题,提出一种声波动方程的隐格式有限体积法,该方法将格点型有限体积法与Newmark格式相结合.模拟平面波的传播过程,对比分析隐格式有限体积法和文献中显格式有限体积法的精度、稳定性及计算消耗等方面的性能.数值结果表明:当λ/Δx≥10时,两种算法均能得到满足精度要求的解;采用无条件稳定的隐格式算法,当满足ω0Δt≤0.3时,预测声压的相对峰值误差1%;当采用相同时间、空间步长时,隐格式算法精度高于显格式算法;隐格式算法对吸收边界的处理精度高于显格式算法,但对全反射边界的处理精度低于显格式算法;两种算法内存消耗比较接近,显格式算法的CPU耗时较少.     

Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

Optical complexities of living cytoplasm--implications for live cell imaging and photo-micromanipulation techniques

The ability to manipulate the intracellular environment within living cells and to monitor the cytosolic chemical changes which occur during cell stimulation has lead to major advances in our understanding of how cells read and respond to their environment. Perhaps the most powerful suite of techniques for achieving these dual objectives is based on the use of light (photons). Because cells are 'transparent', light has been used to both interrogate and manipulate the chemistry inside living cells, exploiting technical advances in both the physical and biochemical sciences. However, cells are neither transparent nor homogeneous with respect to their optical properties. The interface between light and the living cell cytoplasm thus represent an important, yet largely ignored, interface. There has been no review of the optical properties of cytoplasm and little discussion about how the optical properties of living cytoplasm influence the outcome of such measurements and manipulations. In this short review, we discuss the importance of understanding the optical properties of cytoplasm for such techniques and how imperfections in experimental interpretation can arise.     

Floc architecture of bioflocculation sediment by ESEM and CLSM

Sediment flocculation is a critical component for the understanding of cohesive sediment dynamics. Traditionally, the referred study has largely been devoted to forming mechanism, influencing factors and physicochemical sediment conditions of all kinds of organic-flocculation and inorganic-flocculation. However, during the last decade, the bioflocculation of sediment by biological activity has been given increasing attention. But most studies have focused on the interrelations between biological and sedimentological variables. With the assistance of a newly developed field kit and correlative microscopy (which includes environmental scanning electron microscopy and confocal laser scanning microscopy), this article begins to bridge the resolution gap between sediment particles and biological activities as well as its metabolic products biofilm, in order to better understand the role of polymeric material biofilm in floc ultrastructure and outward floc behavior of bioflocculation sediment. Results have demonstrated that bioflocculation sediment was observed to be composed of complex networks of biofilm and appeared to be of complicated physical floc structures. The biofilm was found to embed particles and permeate the void space, representing the dominant physical bridging mechanism of the flocs and contributed to the extensive surface area, architecture characteristics, and mechanical properties of bioflocculation sediment.     

声学参量换能器阵及其测试系统设计

根据声学参量阵原理,设计了一个3×3的九元矩形换能器阵及其测试系统,并在空气进行验证性实验;系统包括正弦信号产生电路、信号控制电路、功率放大电路以及回波信号接收电路等,辅以LabVIEW平台,实现正弦信号和脉冲控制信号的产生,发射信号时间长度控制以及功率放大,并最终驱动换能器阵;实验表明,当有85kHz和90kHz的正弦信号产生时,系统各部分均能正常工作,能够听到天花板处有声响,且回波信号中含有5kHz的频率成分,即证明换能器阵及其系统的设计均是可行的.     

合成介质对PEDOT催化染料敏化太阳电池光阴极性能的影响

采用聚3,4-乙烯二氧噻吩(PEDOT)/FTO为对电极,研究了合成介质对循环伏安法电聚合制备的PEDOT/FTO对电极性能的影响。通过SEM、CV、EIS、Tafel曲线,并首次采用SECM方法对所制备的对电极的电催化性能进行了表征。结果表明:在LiClO4水溶液和1-丁基-3-甲基四氟硼酸盐离子液体(IL)中制备的光阴极具有良好的电催化性能。J-V测试曲线表明,在LiClO4水溶液和IL中制备的光阴极所组装的DSSC器件的光电转化效率分别达6.4%和6.6%,接近于同等条件下以Pt对电极构建的DSSC器件的光电转化效率。