Microstructural Effects of Ion Implantation on Molybdenum

The effects of ion implantation and subsequent annealing on the microstructure of molybdenum have been investigated by transmission electron microscopy. The ions investigated were carbon, nitrogen, and tellurium. The ion-induced damage was found to give rise to grain boundary migration phenomena both during implantation and during subsequent annealing. Precipitation or ordering was found to occur for each ion on annealing.     

Current basis for the ultrastructural clinical diagnosis of tumors: A review

The ultrastructural diagnosis of tumors requires a careful analysis that should be done in an orderly fashion. It requires precise planning from the time of specimen collection to the selection of the area to be examined. Pictures must be taken systematically and every micrograph should allow to answer whether the number of cells photographed is adequate; whether mitoses are present, what is the pattern of the tumor; what is the appearance of the cell membrane; whether the cells are joined by junctional complexes; whether free surfaces possess microvilli or cilia; what organelles are present and how they are distributed; whether there are secretory granules, melanosomes, or other cytoplasmic elements. Nuclear and nucleolar size and shape have to be taken into consideration. The composition of the interstitial extracellular matrix is important in certain types of tumors. Although these questions are not the only ones to be addressed, their use in a logical fashion is helpful when it concerns the ultrastructural diagnosis.     

测定地下水流向的多计数管探头的研制

多计数管流向探头;;单孔;;总流向;;局部流向;;滤水管 掌握地下水的流动方向,有助于研究地下水的运动规律。利用放射性单孔法可以测定地下水流某一点流动方向。 应用放射性指示剂在单孔中测定地下水流向的方法由奥地利的梅尔霍费于1963年首先提出,1964年波兰的鲍劳斯齐克等把这种方法用于现场测量。放射性单孔流向测量方法有若干种,其原理基本相同,仅测量装置结构有区别,早期有单管旋转式探头。我们从1983年7月     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

Melting and crystallization behaviour of elastoplastic semicrystalline copolymers: poly(ether ester)

The melting and crystallization behaviour of an elastoplastic semi-crystalline poly(etherester) has been studied by differential scanning calorimetry. The shape of the melting endotherm is strongly dependent on heating rate and annealing time and results from the sum of simultaneous melting and crystallization phenomena. Samples prepared by different techniques, i.e. by solvent evaporation or by melt extrusion, behave very differently owing to specific crystal morphologies. By applying the Hoffman-Weeks plot, the equilibrium melting temperature has been extrapolated. The Avrami treatment allows the calculation of the index n and of the rate constant K from the isothermal kinetic data.     

国有企业党风廉政建设中的问题及治理研究

剖析国有企业党风廉政建设中的突出问题。提出“推进国有企业党风廉政建设运用市场经济原则经营运作是重要途径;加强对企业经营管理者的监督管理是关键;完善法人治理结构、建立企业内部权力制衡机制是重要基础”的观点。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Formation and investigation of epoxy intumescent compositions modified by active additives

Results are reported of research on intumescent composites based on epoxy resin cross‐linked with polyethylene polyamine and containing ammonium polyphosphate and such modifying additives as calcium borate, manganese dioxide, nickel, and chromium, containing tubulenes as gas‐formers and carbonization stimulators. The changes in composition and physicochemical properties of modified compositions under conditions of heat and fire were investigated by X‐ray photo‐electron spectroscopy, atomic force microscopy, and local force spectroscopy. Ammonium polyphosphate mainly stimulates carbonization processes on the inner surface of a bubble being formed during foam coke formation. The introduction of metal‐containing tubulenes leads to the formation of fire‐retardant and low flammability‐compositions with high coke and carbon structures content. The use of calcium borate in the compositions considerably increases the strength of foam coke being formed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1477–1483, 2002