Synthesis and characterization of poly (linoleic acid)-g-poly(methyl methacrylate) graft copolymer with applying in Au/PLiMMA/n-Si diode

Poly (linoleic acid)-g-poly(methyl methacrylate) (PLiMMA) graft copolymer was synthesized and characterized. PLiMMA graft copolymer was synthesized from polymeric linoleic acid peroxide (PLina) possessing peroxide groups in the main chain by free radical polymerization of methyl methacrylate. Later, PLiMMA was characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques. Furthermore, Au/PLiMMA/n-Si diode was fabricated for the purpose of investigating PLiMMA׳s conformity in diodes. The main electrical characteristics of this diode were investigated using experimental current–voltage (I–V) measurements in dark and at room temperature. Obtained results, such as sufficiently high rectifying ratio of 4.5×10⁴, indicate that PLiMMA is a promising organic material for electronic device applications.     

壳体厚度对TNT炸药快速烤燃响应的影响

采用自行设计的快速烤燃试验方法,测试厚度为2,4,6 mm梯恩梯(TNT)装药壳体的响应状态,结合TNT的高压差示扫描量热(PDSC)分解特性,研究了厚度对炸药装药响应的影响.结果表明:在快速烤燃试验条件下,壳体厚度由2-6 mm变化时,TNT炸药均为爆炸反应等级;壳体厚度变化对TNT炸药响应等级没有显著影响,但炸药装...     

湍流剖面仪控制系统硬件设计与实现

开发了采集海洋湍流数据的一种新型湍流剖面仪,此仪器可获得海洋垂直剖面2mm尺度的剪切流速度数据,重点研究湍流剖面仪控制系统的硬件设计,包括微尺度流信号放大处理电路,并扩展了FLASH存储器（K9f2808UOC）保存测量结果,及RS232传输协议的数据通信电路设计,湖试结果表明此湍流剖面测量仪性能良好。     

番荔枝属不同品种叶表面微形态的电镜观察

应用扫描电子显微镜对番荔枝属九个番荔枝品种的叶表面角质、蜡质、表皮毛、气孔等微形态进行了观察比较.结果显示：它们之间的叶表面表皮毛、角质、蜡质和气孔等微形态均有较大的差异.秘鲁番荔枝、AP杂交番荔枝、无核番荔枝上下表面均具有单列丝状毛,气孔只分布于下表面;普通番荔枝、圆滑番荔枝、粗鳞番荔枝叶表面均无表皮毛;秘鲁番荔枝、AP杂交番荔枝、普通番荔枝、粗鳞番荔枝上下表皮角质呈不规则的岛状突起,而圆滑番荔枝、无核番荔枝表面角质较平,角质膜形状不甚清晰;以上所述番荔枝叶表面都覆盖有密厚的针晶状蜡被;除圆滑番荔枝的气孔有副卫细胞外,其它气孔只有保卫细胞而无副卫细胞;刺番荔枝、山刺番荔枝、牛心番荔枝的叶表皮毛为短棍棒状,其表皮角质细胞呈乳突状或波状突起;山刺番荔枝的棒状毛顶端钝圆,而刺番荔枝与牛心番荔枝的棒状毛顶端尖锐;刺番荔枝和山刺番荔枝只有下表皮才具有棒状毛,其气孔形状近似圆形,孔口略内陷于表皮层,牛心番荔枝表面角质呈不规则波状突起,气孔细长稍突.由于这些不同的叶表面微形态是长期受各物种原产地的气候、环境条件影响所形成的,因此研究番荔枝品种的叶表面微形态结构,对正确引种和推广番荔枝果树种植有着重要的意义.     

GaAs单片集成激光器驱动电路在片测量

用多触头微波探针 ,对 Ga As单片集成激光器驱动电路芯片进行了在片测试和筛选 ,测得芯片频率响应带宽为 3.8GHz.使用高速增益开关半导体激光器作为采样光脉冲源 ,采用了背面直接采样方式建立了电光采样测试仪 .检测了 Ga As单片集成激光器驱动电路芯片内部点的高速电信号波形 .     

一种3D眼镜虚拟试戴系统的实现

针对人脸图像试戴3D眼镜过程中存在的镜腿遮挡人脸问题,文中提出一种基于人脸图像的3D眼镜虚拟试戴技术。利用构建的人脸形状的三维模型,使其在虚拟试戴中对镜腿起到消隐作用,解决镜腿的遮挡问题。文中对输入的人脸图像进行关键点检测,结合Graham扫描法求得人脸形状的凸多边形,利用平移扫描构建人脸形状的三维模型。此外,文中根据定位人脸图像上的关键点以及姿态估计后对三维眼镜模型的变换,将眼镜模型佩戴到人脸图像上。实验结果表明,该方法对于多视角的人脸图像实现了虚拟试戴效果,解决了多种视角下人脸图像试戴过程中镜腿的遮挡问题,虚拟试戴中镜腿遮挡平均准确率为94.5%,遮挡精度较高。     

双面镜多元并扫遥感图像的几何校正方法

双面镜多元并扫成像方式在星载仪器中已得到越来越广泛的应用,但相应的遥感图像的预处理工作的重要性也日渐突出.文中从成像方式和仪器结构方面考虑,针对双面镜多元并扫成像方式提出了一套0级数据的几何方法,并对处理前后的图像质量进行了比较.结果表明,该校正方法可有效地改善图像的几何质量,校正效果良好.     

宽角扫描侧馈偏置卡塞格伦天线的优化设计

为满足星载天线空间电扫描的要求,研究了宽角扫描侧馈偏置卡塞格伦天线(SFOC)的设计问题.给出了SFOC天线的结构形式,通过射线追踪的方法对SFOC的最佳馈源位置和最佳馈源指向进行了优化设计.二者的确定不仅改善了SFOC天线系统的扫描特性,而且提高了它的工程可实现性.分析结果表明,该SFOC天线在宽角扫描过程中,方向图畸变很小,增益损失和副瓣电平均达到了设计要求,从而为全球扫描星载天线的设计提供了有效的方案.     

Crystal Size,Morphology, and Growth Mechanism in Bio‐Inspired Apatite Nanocrystals

Bio‐inspired apatite nanoparticles precipitated in the presence of citrate ions at increasing maturation times are characterized in terms of structure, size, morphology, and composition through advanced X‐ray total scattering techniques. The origin of the platy crystal morphology, breaking the hexagonal symmetry, and the role of citrate ions is explored. By cross‐coupling the size and shape information of crystal domains with those obtained by atomic force microscopy on multidomain nanoparticles, a plausible mechanism underlying the amorphous‐to‐crystal transformation is reconstructed. In the present study, citrate plays the distinct roles of inducing the platy morphology of the amorphous precursor and controlling the thickness of the Ca‐deficient apatite nanocrystals. These findings can open new scenarios also in bone mineralization, where citrate might have a broader role to play than has been thought to date.     

IC Surface Corrosion Inspection by C-Mode Scanning Acoustic Microscopy

C-mode scanning acoustical microscopy, C-SAM, is widely used in plastic package evaluations and for failure analysis. It permits to detect subsurface delaminations, cracks and pores （air bubbles） for different microelectronics packages. In this study, abnormality was observed in C-SAM daily test, the images showed no delaminations but inhomogeneities on the IC surface. Corrosion was found by optical microscope and scanning electron microscope after decapsulation. It can be revealed as the acoustic impedance is different between corrosion and normal area. The presence of inhomogeneities and discontinuities along ultrasonic waves＇ propagation paths inside the matter causes modifications in the amplitude and polarity of ultrasonic waves. However, C-SAM＇s capability in detecting IC surface corrosion has not been presented. The capability will be illustrated and the inspection mechanism will be discussed in this paper.