基于退化四元小波变换的纸币识别

针对如何提取纸币图像特征和提高识别率的问题,综合利用退化四元小波变换具有的相位特性,提出一种基于退化四元小波变换的纸币识别方法.该方法首先对采集的纸币图像进行倾斜校正和边缘检测,然后运用退化四元小波对纸币图像进行分解操作,并对分解系数进行统计分析,将每个分解子带系数的能量和标准差作为该纸币图像的特征向量,最后将支持向量机作为分类器对纸币图像进行识别.本文方法在资源约束的嵌入式清分系统上实现,实验结果表明采用本文提出的算法突破了传统纸币识别系统识别率很难再提高的瓶颈,同时能够满足清分系统的实时性要求.     

用虚拟仪器技术验证牛顿第二定律

牛顿第二定律是经典力学的基本定律之一,为了形象、直观、准确地验证牛顿第二定律,本文利用数字实验系统生动地展示F=ma的关系。通过本实验可以使学生获得更直观的教学感受。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

基于BPNN-PID的风电机组桨距控制分析

变桨控制技术是风力发电机组的核心技术之一,开展对风力发电机组变桨控制方面的研究具有重要的理论和应用价值。根据风力发电机组在额定风速以上如何保持输出功率稳定和降低风轮转速波动的控制技术进行研究,在传统的变桨距控制策略基础上,提出了基于BP神经网络(Neural Network,NN)整定PID的控制策略,并在Matlab/simulink环境下对PID控制和BP神经网络控制相结合的复合控制系统进行建模与分析。对1.5MW风电机组的仿真验证了BPNN-PID算法的有效性,提出算法不仅能够解决传统PID控制器参数整定困难的问题,而且优化效率更高,可以得到优良的控制性能。     

氢化物发生的机理及其在原子光谱中的应用

详细介绍了氢化物发生的反应体系和氢化反应的两种机理,并讨论了氢化物发生法在原子光谱中的应用现状和发展趋势。     

基于火焰摄动谱分布的动态燃烧优化

提出基于火馅摄动谱分布特性与火馅微压振动信号的燃烧控制方法，通过分析三层小速分解后的信号平均幅值变化特点可以找到最优燃烧状态。     

A novel clock generation algorithm for system-on-chip based on least common multiple

Due to increase in the number of Intellectual Property (IP) cores, clock generation in current day System-on-Chips (SoCs) is facing a crisis. The conventional method of using a dedicated Phase Locked Loop (PLL) to generate the clock for each IP core is becoming inefficient in terms of power and cost. We propose an algorithm based on Least Common Multiple (LCM) to minimize the number of PLLs required to generate the clocks for the IP cores in a SoC. This is done by finding an Optimum Operating Frequency (OOF) for each IP core within 10% below the maximum operating frequency of the core. The OOF is chosen such that the LCM of the OOF of all the IP cores is minimized. Simulated annealing is used to find the LCM. This LCM is the crucial high frequency from which maximum number of clocks can be derived by clock dividers.     

变压吸附(PSA)空分制氧技术进展

论述了 PSA法空分制氧分子筛的开发现状和制氧工艺的进展 ,为 PSA法空分制氧今后的发展提出了研究方向     

Gender,culture and determinants of behavioural intents to adopt mobile commerce among the Y Generation in transition economies: evidence from Kazakhstan

This study investigates perceived risk and trust in relationship to the Diffusion of Innovation Theory [Rogers, E.M., 1962. Diffusion of innovations. Glencoe, IL: The Free Press; 1983. Diffusion of innovations. 3rd ed. New York: The Free Press] from a cultural perspective to understand the determinants of behavioural intent to adopt mobile commerce among the Y Generation in Kazakhstan. Surveys from 345 university-level students and subsequent structural equation modelling revealed perceived risk, trustworthiness and Rogers’ five innovation characteristics are important determinants. Perceived risk and trustworthiness are important determinants because of the high uncertainty avoidance characteristics of the Kazakh society. This study advances theory regarding culture- and generation-based characteristics to transition economies by verifying theoretical proposition regarding the behavioural intent towards mobile commerce adoption, resulting in a greater understanding of mobile commerce adoption among the Y Generation in transition economies. Marketing implications are discussed.     

Tool path generation framework for accurate manufacture of complex 3D sheet metal parts using single point incremental forming

The prototyping of complex sheet metal parts using single point incremental forming (SPIF) requires the generation of optimal tool paths and/or tool path sequences that ensure that the formed part is within geometric design specifications. The presence of a multitude of features on complex parts leads to multiple inaccuracy inducing phenomena occurring simultaneously due to interactions between the features. This paper proposes a network analysis methodology using topological conceptual graphs to capture the effects of different phenomena on the final accuracy of a sheet metal part manufactured by SPIF. Using this framework optimized tool paths can be generated that compensate for the inaccuracy inducing behavior. Tool path generation algorithms to create partial tool paths that account for the accuracy of specific features in the part based on the proposed framework are also presented. Finally, the creation of integrated tool paths maintaining complementarity between tool paths and desired continuity behavior using non-uniform cubic B-splines is illustrated. A number of case studies demonstrating the applicability of the integrated framework are discussed, where the maximum deviations in the part are significantly reduced and the average absolute deviations for the complete part are brought down to less than 0.5 mm.